So, per the advice of someone on this forum, I installed the Code Meter software to authorize Reason on my PC.
I HATE WITH A PASSION that every time I use Reason Rack as a vst in Cubse, I have to go through the whole online authorization pop up window nonsense.
I was told that installing Code Meter would allow me to authorize Reason products on my machine so that I wouldn't have to do this nonsense EVERY SINGLE TIME. In other words, Code Meter would authorize Reason stuff to work like EVERY OTHER PLUGIN on my machine.
Well, I installed Code Meter and just opened a Cubase project with some Reason rack instances, and the same annoying online authorization pop up comes up. Sign in... blah, blah, blah. So annoying!!!
What is the point of Code Meter? Why did even bother installing this?
What Is The Point Of Code Meter?
-
- Posts: 1506
- Joined: 16 Jul 2021
After you downloaded and installed Codemeter, did you go thru the actual authorization process for Reason?
https://help.reasonstudios.com/hc/en-us ... -computer-
https://help.reasonstudios.com/hc/en-us ... -computer-
-
- Posts: 99
- Joined: 17 Feb 2020
Authorizing for use without Internet access:
https://help.reasonstudios.com/hc/en-us ... s-it-work-
Scroll down to the without internet access part.
https://help.reasonstudios.com/hc/en-us ... s-it-work-
Scroll down to the without internet access part.
-
- Posts: 9
- Joined: 14 May 2020
I'm pretty sure offline authorisation doesn't work the same for Reason 12 as shown in the support article. I tried a few months ago and on the 'Authorise Computer and Keys' page there was no Computer option listed. I think it only works now if you have a dongle.
-
- Posts: 99
- Joined: 17 Feb 2020
It still works on reason 12. RE trials may cause it to ask you to log in.
-
- RE Developer
- Posts: 1271
- Joined: 17 Jan 2015
- Location: Stockholm
I'm running Reason 12 with computer authorization without problems (I'm on the latest macOS). If you don't see the option to authorize your computer I'm guessing that either Codemeter is not installed properly, or you might be running Reason+ instead of a perpetual license?
-
- Posts: 9
- Joined: 14 May 2020
Cool to hear it should work, thanks for letting me know! But I tried again, and still no luck. I'm on Windows 10 with Reason 12.2.8. Anyone on Windows 10 have offline authorisation working?
I've installed Codemeter 7.1 from the Reasonstudios download page, the codemeter service is running, but when I got through the authorisation steps, it only lists "no ignition key found" and "no balance found" on the Authorise Computer and Keys page. Nothing listed about authorising my computer like shown on the support page. I'm not trialling any REs, and I'm not using Reason+ (though I was when I originally installed Reason 12).
I might be missing something, but I'm pretty sure I've followed all the steps from the support page article. Would be handy to get offline authorisation to work while travelling. Since it should work, I'll raise a support ticket with Reason Studios.
I've installed Codemeter 7.1 from the Reasonstudios download page, the codemeter service is running, but when I got through the authorisation steps, it only lists "no ignition key found" and "no balance found" on the Authorise Computer and Keys page. Nothing listed about authorising my computer like shown on the support page. I'm not trialling any REs, and I'm not using Reason+ (though I was when I originally installed Reason 12).
I might be missing something, but I'm pretty sure I've followed all the steps from the support page article. Would be handy to get offline authorisation to work while travelling. Since it should work, I'll raise a support ticket with Reason Studios.
-
- Posts: 3225
- Joined: 17 Apr 2015
- Location: Aachen, Germany
If you've still got R12 installed from the Reason+ trial you might have to uninstall it and download the R12 version from the website and install this version. If this does not allow you to authorise, then you could try to get a newer version of the wibu codemeter runtime installed directly from wibu systems (make sure to install all of its components also the network ones).
-
- Posts: 99
- Joined: 17 Feb 2020
tarsiidea wrote: ↑14 Sep 2022Cool to hear it should work, thanks for letting me know! But I tried again, and still no luck. I'm on Windows 10 with Reason 12.2.8. Anyone on Windows 10 have offline authorisation working?
I've installed Codemeter 7.1 from the Reasonstudios download page, the codemeter service is running, but when I got through the authorisation steps, it only lists "no ignition key found" and "no balance found" on the Authorise Computer and Keys page. Nothing listed about authorising my computer like shown on the support page. I'm not trialling any REs, and I'm not using Reason+ (though I was when I originally installed Reason 12).
I might be missing something, but I'm pretty sure I've followed all the steps from the support page article. Would be handy to get offline authorisation to work while travelling. Since it should work, I'll raise a support ticket with Reason Studios.
It’s working for me in windows 10 and reason 12.
-
- Posts: 1025
- Joined: 19 Jan 2015
- Location: hear
Had the same issue, potentially this can help you out
"Assembled a new computer and freshly installed Codemeter 7.4 directly from WIBU. The default installation options exclude remote-acess and networkserver. Though from the description they didn´t sound like they would be relevant for the case (had already read them before when trying to authorise the previous machine), after including these in the installationoptions I could finally label the previous computer lost because I did, like mentioned, a clean rescue install and could simply authorise the new computer afterwards.
I couldn´t crosscheck it yet, then I´m quite sure it´s the networkserver/remote access options being excluded from Codemeter´s default installer options, hindering a proper communication between Propellerheads and Codemeter on the computer if not actively activated.
[...]
"
"Assembled a new computer and freshly installed Codemeter 7.4 directly from WIBU. The default installation options exclude remote-acess and networkserver. Though from the description they didn´t sound like they would be relevant for the case (had already read them before when trying to authorise the previous machine), after including these in the installationoptions I could finally label the previous computer lost because I did, like mentioned, a clean rescue install and could simply authorise the new computer afterwards.
I couldn´t crosscheck it yet, then I´m quite sure it´s the networkserver/remote access options being excluded from Codemeter´s default installer options, hindering a proper communication between Propellerheads and Codemeter on the computer if not actively activated.
[...]
"
tarsiidea wrote: ↑14 Sep 2022Cool to hear it should work, thanks for letting me know! But I tried again, and still no luck. I'm on Windows 10 with Reason 12.2.8. Anyone on Windows 10 have offline authorisation working?
I've installed Codemeter 7.1 from the Reasonstudios download page, the codemeter service is running, but when I got through the authorisation steps, it only lists "no ignition key found" and "no balance found" on the Authorise Computer and Keys page. Nothing listed about authorising my computer like shown on the support page. I'm not trialling any REs, and I'm not using Reason+ (though I was when I originally installed Reason 12).
I might be missing something, but I'm pretty sure I've followed all the steps from the support page article. Would be handy to get offline authorisation to work while travelling. Since it should work, I'll raise a support ticket with Reason Studios.
-
- Posts: 1025
- Joined: 19 Jan 2015
- Location: hear
Had the same issue, potentially this can help you out
"Assembled a new computer and freshly installed Codemeter 7.4 directly from WIBU. The default installation options exclude remote-acess and networkserver. Though from the description they didn´t sound like they would be relevant for the case (had already read them before when trying to authorise the previous machine), after including these in the installationoptions I could finally label the previous computer lost because I did, like mentioned, a clean rescue install and could simply authorise the new computer afterwards.
I couldn´t crosscheck it yet, then I´m quite sure it´s the networkserver/remote access options being excluded from Codemeter´s default installer options, hindering a proper communication between Propellerheads and Codemeter on the computer if not actively activated.
[...]
"
And yes it turned out to be the case.
"Assembled a new computer and freshly installed Codemeter 7.4 directly from WIBU. The default installation options exclude remote-acess and networkserver. Though from the description they didn´t sound like they would be relevant for the case (had already read them before when trying to authorise the previous machine), after including these in the installationoptions I could finally label the previous computer lost because I did, like mentioned, a clean rescue install and could simply authorise the new computer afterwards.
I couldn´t crosscheck it yet, then I´m quite sure it´s the networkserver/remote access options being excluded from Codemeter´s default installer options, hindering a proper communication between Propellerheads and Codemeter on the computer if not actively activated.
[...]
"
And yes it turned out to be the case.
tarsiidea wrote: ↑14 Sep 2022Cool to hear it should work, thanks for letting me know! But I tried again, and still no luck. I'm on Windows 10 with Reason 12.2.8. Anyone on Windows 10 have offline authorisation working?
I've installed Codemeter 7.1 from the Reasonstudios download page, the codemeter service is running, but when I got through the authorisation steps, it only lists "no ignition key found" and "no balance found" on the Authorise Computer and Keys page. Nothing listed about authorising my computer like shown on the support page. I'm not trialling any REs, and I'm not using Reason+ (though I was when I originally installed Reason 12).
I might be missing something, but I'm pretty sure I've followed all the steps from the support page article. Would be handy to get offline authorisation to work while travelling. Since it should work, I'll raise a support ticket with Reason Studios.
-
- Posts: 1025
- Joined: 19 Jan 2015
- Location: hear
Before being able to use it without logging in, you would have to authorise the computer to be the offline machine.
highmarcs wrote: ↑11 Sep 2022So, per the advice of someone on this forum, I installed the Code Meter software to authorize Reason on my PC.
I HATE WITH A PASSION that every time I use Reason Rack as a vst in Cubse, I have to go through the whole online authorization pop up window nonsense.
I was told that installing Code Meter would allow me to authorize Reason products on my machine so that I wouldn't have to do this nonsense EVERY SINGLE TIME. In other words, Code Meter would authorize Reason stuff to work like EVERY OTHER PLUGIN on my machine.
Well, I installed Code Meter and just opened a Cubase project with some Reason rack instances, and the same annoying online authorization pop up comes up. Sign in... blah, blah, blah. So annoying!!!
What is the point of Code Meter? Why did even bother installing this?
-
- Information
-
Who is online
Users browsing this forum: No registered users and 7 guests