Hi,
am I right in thinking in order to play notes from the Matrix into Scales&Chords and then into the Combinator Synth, I'm going to have to put S&C *inside* the Combinator Synth?
if I wire the Matrix to the Combinator Sequencer Control CV inputs, it bypasses S&C
thanks
J
playing Combinator synth with Player (eg Scales & Chords)
Scales and Chords plus your instrument inside a combinator.
Matrix outside the combinator, patched into the CV and Gate of the Combinator
Matrix outside the combinator, patched into the CV and Gate of the Combinator
Get more Combinators at the deeplink website
https://www.reasonstudios.com/shop/rack ... layer-tap/
or place of these free units on top of the s&c and hook the matrix up to that and you can keep the s&c on top of the combi
or place of these free units on top of the s&c and hook the matrix up to that and you can keep the s&c on top of the combi
- Certified Reason expert
The instrument is already a Combinator though
This is the problem I find with C2 at the moment. There’s no separation between the Device side of it and the state (preset patch) for it . That means if I stick the S&C inside it and then load another combinator “patch”, I lose the S&C each time since it’s loading an entirely new version of the combinator
I’ll try Bes’ method
Thanks
Nice to see the Binaural Synth getting some love - how’s it working for you?jmp909 wrote: ↑06 Sep 2022Thanks @bes that worked!Bes wrote: ↑06 Sep 2022https://www.reasonstudios.com/shop/rack ... layer-tap/
or place of these free units on top of the s&c and hook the matrix up to that and you can keep the s&c on top of the combi
Selig Audio, LLC
- mimidancer
- Posts: 679
- Joined: 30 Sep 2021
The matrix can be in or out of the combinator. But the matrix cv and gate need to go into the combi cv and gate. Then the SandC player will quantize your notes to the desired key. If you are using all "player" devices they can be placed on top of the combinator and will affect everything in the combinator.
Hi thanks, I reported a bug that the Matrix inside a Combinator caused a delay on the notes being triggered when connected to the Sequencer Control. I don't know if it was fixed in the last updatemimidancer wrote: ↑07 Sep 2022The matrix can be in or out of the combinator. But the matrix cv and gate need to go into the combi cv and gate. Then the SandC player will quantize your notes to the desired key. If you are using all "player" devices they can be placed on top of the combinator and will affect everything in the combinator.
viewtopic.php?f=4&t=7528622&p=612156
This is intended behaviour because it creates a signal feedback loop due to the way how PDC was implemented and a known limitation. If you switch Edit -> Preferences -> Audio -> Performance -> Render Audio using Audio card ... off it should work without delay but with the downside of reduced performance with VST plugins or REs.jmp909 wrote: ↑07 Sep 2022Hi thanks, I reported a bug that the Matrix inside a Combinator caused a delay on the notes being triggered when connected to the Sequencer Control. I don't know if it was fixed in the last updatemimidancer wrote: ↑07 Sep 2022The matrix can be in or out of the combinator. But the matrix cv and gate need to go into the combi cv and gate. Then the SandC player will quantize your notes to the desired key. If you are using all "player" devices they can be placed on top of the combinator and will affect everything in the combinator.
viewtopic.php?f=4&t=7528622&p=612156
See also this article https://help.reasonstudios.com/hc/en-us ... what-s-up-
It's better to leave the Matrix outside and above the combinator since it will remove the potential feedback loop and give you 0 latency.jmp909 wrote: ↑07 Sep 2022Hi thanks, I reported a bug that the Matrix inside a Combinator caused a delay on the notes being triggered when connected to the Sequencer Control. I don't know if it was fixed in the last updatemimidancer wrote: ↑07 Sep 2022The matrix can be in or out of the combinator. But the matrix cv and gate need to go into the combi cv and gate. Then the SandC player will quantize your notes to the desired key. If you are using all "player" devices they can be placed on top of the combinator and will affect everything in the combinator.
viewtopic.php?f=4&t=7528622&p=612156
Longer explanation:
Reason has to render every device in order since the output of one device is the input to the next device in the chain. If there's any chance of a device feeding back into a device earlier in the chain (for example a device feeding signals back into the combinator which contains it), it means that this partricular signal will have to be processed in the next "batch", i e a delay will appear. This is just a consequence of how digital audio works.
-
- Information
-
Who is online
Users browsing this forum: No registered users and 14 guests