CPU usage and R12 crashs
Now i started a new project and played with it 90minutes, after scaling a cherry audio vst synth, i had a crash of R12.
The cpu usage was only 21% at 96khz with Ryzen3900x 3600mhz ram in the last hour.
Also the cpu usage with a R10 finalized project wich is still big, gets not over 45% at 96khz and 81% at 192khz, what before never worked at such high samplerates, and all at 128 -256 buffersize. At 48khz iit shows only 1 dsp bar at 64 samples.
So before R10 produces over 70% cpu usage crackles and glitches at lower buffer sizes than 512 in 96khz, now it feels like i have 2-3 times of cpu power
The cpu usage was only 21% at 96khz with Ryzen3900x 3600mhz ram in the last hour.
Also the cpu usage with a R10 finalized project wich is still big, gets not over 45% at 96khz and 81% at 192khz, what before never worked at such high samplerates, and all at 128 -256 buffersize. At 48khz iit shows only 1 dsp bar at 64 samples.
So before R10 produces over 70% cpu usage crackles and glitches at lower buffer sizes than 512 in 96khz, now it feels like i have 2-3 times of cpu power
https://soundcloud.com/user-594407128
Reason12.7,Ryzen3900&mobile4800H
YamahaEG112,Strat,Djembe,Digeridoo,RhythmWolf,Miniak,Ipad+SparkLE
SE2200t,X1T,U47,Sm7b,Nt2a,C1mk2,Se1a > VASmicpre´s/MindprintDI/ZoomH6/Audient/RME > HD660pro,Dt880,EveSC205
Reason12.7,Ryzen3900&mobile4800H
YamahaEG112,Strat,Djembe,Digeridoo,RhythmWolf,Miniak,Ipad+SparkLE
SE2200t,X1T,U47,Sm7b,Nt2a,C1mk2,Se1a > VASmicpre´s/MindprintDI/ZoomH6/Audient/RME > HD660pro,Dt880,EveSC205
Reason 12 wasn't ready for release, it seems. It is by far the most unstable new version of Reason I have ever used. After using it for two days, I have seen the following problems:
- Three BSOD (I almost never see those in Windows 10)
- Two Reason freezes
- Several instances where Reason would not launch, or would launch, and then quickly vanish
- Unusually slow loading VST plug-ins
I am also having absolutely horrendous performance on Reason 12.
I let everything index for over 24-hours. I also confirmed that the size of the index file is no longer increasing,
which seems to indicate that the indexing is. complete. So it should not be an issue of creating a cache file.
Still, Reason 11 Suite vs Reason 12 on two different Macs runs over 400% percent better when you look at the CPU usage.
In addition my fan in Reason 12 is going into overdrive just hitting a few notes of the default Europa patch.
Getting audio clicks all over with R12 as well. At the moment it is honestly unusable on two different Macs (both pretty current, an i9 and an i7). I even tried updating one from Catalina to Big Sur...but no change in R12 performance.
I don't know what else to look at, but I am pretty disappointed. Hopefully this gets fixed soon. In the meantime I have to keep working in R11 Suite, because R12 just straight-up isn't working adequately.
I let everything index for over 24-hours. I also confirmed that the size of the index file is no longer increasing,
which seems to indicate that the indexing is. complete. So it should not be an issue of creating a cache file.
Still, Reason 11 Suite vs Reason 12 on two different Macs runs over 400% percent better when you look at the CPU usage.
In addition my fan in Reason 12 is going into overdrive just hitting a few notes of the default Europa patch.
Getting audio clicks all over with R12 as well. At the moment it is honestly unusable on two different Macs (both pretty current, an i9 and an i7). I even tried updating one from Catalina to Big Sur...but no change in R12 performance.
I don't know what else to look at, but I am pretty disappointed. Hopefully this gets fixed soon. In the meantime I have to keep working in R11 Suite, because R12 just straight-up isn't working adequately.
I don't buy R12 yet, but what it concerns me is the different scenarios some people are facing since launch.
Some users says it works great, without any issues and others like in this thread are getting big cpu, memory or crash issues....
Is those exceptions or these are acknowledge bugs that will be fixed soon? Should wait a bit more before I jump in this boat ?
Thanks
Some users says it works great, without any issues and others like in this thread are getting big cpu, memory or crash issues....
Is those exceptions or these are acknowledge bugs that will be fixed soon? Should wait a bit more before I jump in this boat ?
Thanks
-
- Posts: 3999
- Joined: 20 Oct 2017
- Location: Norway
- Contact:
I just wrote on another thread but it may help some: check your settings, make sure hyperthreading is off. I had CPU issues yesterday until I realised the settings from 11 don't automatically move to the new version. The theme change should have been the first clue ![😂](//cdn.jsdelivr.net/emojione/assets/svg/1f602.svg)
- TritoneAddiction
- Competition Winner
- Posts: 4277
- Joined: 29 Aug 2015
- Location: Sweden
By the looks of it, it seems it's gonna be quite a while before I jump on this upgrade. Plan was to wait 1-2 weeks after release just in case. Was totally ready to dive right into Mimic and start creating. Maybe this is not the biggest Reason upgrade feature wise, but I can live with that.
But reading about all these problems is such a turn off. And there seems to be A LOT of problems people are experiencing, some small, some big. It really seems like they rushed to get this release out before it was ready.
I know Mattias said RS are taking a new direction with making little improvements/updates more often and that's cool. And it's good that they are more transparent about the direction they're going.
But it's one thing to add new features to an already finished product, it's another to sell a product that obviously isn't in a finished state yet. Unfortunately this upgrade seems to be in the latter category.
If this is the path they'll continue treading (early access method, selling unfinished stuff) I'll be very careful when buying anything from RS from now on.
Having said all that, I do realize I have enough shit to make music for at least 5 years before really needing to add anything new. Anything new is just a fun bonus in my view. So it's all a matter of perspective I guess. I'm quite content with what I have. Just recently I've been rediscovering how much fun one can have with Europa and Grain. Just those two devices alone could generate an endless amount of sounds. So maybe I should just relax, stay with R11 while I cautiously observe where RS is going.
But reading about all these problems is such a turn off. And there seems to be A LOT of problems people are experiencing, some small, some big. It really seems like they rushed to get this release out before it was ready.
I know Mattias said RS are taking a new direction with making little improvements/updates more often and that's cool. And it's good that they are more transparent about the direction they're going.
But it's one thing to add new features to an already finished product, it's another to sell a product that obviously isn't in a finished state yet. Unfortunately this upgrade seems to be in the latter category.
If this is the path they'll continue treading (early access method, selling unfinished stuff) I'll be very careful when buying anything from RS from now on.
Having said all that, I do realize I have enough shit to make music for at least 5 years before really needing to add anything new. Anything new is just a fun bonus in my view. So it's all a matter of perspective I guess. I'm quite content with what I have. Just recently I've been rediscovering how much fun one can have with Europa and Grain. Just those two devices alone could generate an endless amount of sounds. So maybe I should just relax, stay with R11 while I cautiously observe where RS is going.
Thanks, but I already checked my settings, hyper-threading is off.
I have even gone as far as doing a fresh Operating System install on one of my Macs...it didn't help.
I left Reason open for half a day to make absolutely sure everything is cached...that also didn't help.
It is also a pretty current and powerful 8-core I9, and again everything is still working fine in Reason 11 Suite.
So, I don't know what else to try at this point.
I have even gone as far as doing a fresh Operating System install on one of my Macs...it didn't help.
I left Reason open for half a day to make absolutely sure everything is cached...that also didn't help.
It is also a pretty current and powerful 8-core I9, and again everything is still working fine in Reason 11 Suite.
So, I don't know what else to try at this point.
PhillipOrdonez wrote: ↑03 Sep 2021I just wrote on another thread but it may help some: check your settings, make sure hyperthreading is off. I had CPU issues yesterday until I realised the settings from 11 don't automatically move to the new version. The theme change should have been the first clue![]()
- MixerJaexx
- Posts: 68
- Joined: 31 Jan 2021
I’m enjoying Reason 12, but experiencing the some of the same types of issues on my Windows and macOS devices.
Mixer Jaëxx
www.jaexx.com
www.jaexx.com
- syzygianrrf9999
- Posts: 36
- Joined: 14 Aug 2018
- Contact:
I just upgraded this morning, Reason 12 opens a solid white document with a search bar and file menu and that's it. Can't edit any settings since it won't open. Does this over and over, even as the only application running. Back to Reason 11 I guess.
- Attachments
-
- reason12.JPG (78.9 KiB) Viewed 3685 times
industrial/psycore/breakcore/electronic modular metal: https://soundcloud.com/rose-red-flechette
If you've got trouble, be sure to also submit detailed bug reports (including system specs, CPU/GPU etc.) to RS, os they can perhaps find a pattern and narrow down the root cause of the bugs: https://help.reasonstudios.com/hc/en-us/requests/new
- TritoneAddiction
- Competition Winner
- Posts: 4277
- Joined: 29 Aug 2015
- Location: Sweden
Maybe they decided to add another theme option in R12. They could call it "Solid White" or "Invisible".syzygianrrf9999 wrote: ↑04 Sep 2021I just upgraded this morning, Reason 12 opens a solid white document with a search bar and file menu and that's it. Can't edit any settings since it won't open. Does this over and over, even as the only application running. Back to Reason 11 I guess.
But seriously, that really sucks man. I hope things work out for you soon.
Seeing stuff like this, I'm so far away from pushing that upgrade button right now.
Looks like you don't have proper OpenGL drivers installed. Check if there is a newer driver for your GPU to download at the respective manufacturer website (AMD, nvidia).syzygianrrf9999 wrote: ↑04 Sep 2021I just upgraded this morning, Reason 12 opens a solid white document with a search bar and file menu and that's it. Can't edit any settings since it won't open. Does this over and over, even as the only application running. Back to Reason 11 I guess.
Please submit a report via Support. You seem to have tried all the common things so I'm particularly curious about your case. We're working hard to hunt these things down now. A majority of people seems to have the same or better performance and it doesn't seem to be related to computer specs so any help figuring this out is great. In your report, please also include what actually happens in terms of performance. For example, even if performance "looks" worse when checking usage using OS tools you might be able to do the exact same project you could before without dropouts, hangs or other issues. That's super key for us to know!FiatLux wrote: ↑03 Sep 2021Thanks, but I already checked my settings, hyper-threading is off.
I have even gone as far as doing a fresh Operating System install on one of my Macs...it didn't help.
I left Reason open for half a day to make absolutely sure everything is cached...that also didn't help.
It is also a pretty current and powerful 8-core I9, and again everything is still working fine in Reason 11 Suite.
So, I don't know what else to try at this point.
PhillipOrdonez wrote: ↑03 Sep 2021I just wrote on another thread but it may help some: check your settings, make sure hyperthreading is off. I had CPU issues yesterday until I realised the settings from 11 don't automatically move to the new version. The theme change should have been the first clue![]()
Thanks!
- chimp_spanner
- Posts: 3006
- Joined: 06 Mar 2015
I've only tried it on 2 systems so far; my 16GB 2017 MBP, and an old HP Envy 4th gen i7 w/12GB. Performance is definitely better on both. I'd agree with Mattias that in some instances it might feel or look like the load is heavier but the actual experience is more stable (projects that used to stutter now play without interruption). The biggest improvement for me has been in scrolling or expanding devices in busy projects. That used to create huge spikes. Not so much any more.
No crashes on either yet.
The only thing I did notice on the Windows machine was that on one launch, the transport was completely blank (no play/stop/record graphics). Only happened once. But I thought it was interesting. Definitely keeping 11 on standby just in case though while the wrinkles get ironed out.
No crashes on either yet.
The only thing I did notice on the Windows machine was that on one launch, the transport was completely blank (no play/stop/record graphics). Only happened once. But I thought it was interesting. Definitely keeping 11 on standby just in case though while the wrinkles get ironed out.
I roll back to Reason 11 right today. this thing is totally unusable!!!!
![Crying or Very Sad :cry:](./images/smilies/icon_cry.gif)
FiatLux wrote: ↑03 Sep 2021I am also having absolutely horrendous performance on Reason 12.
I let everything index for over 24-hours. I also confirmed that the size of the index file is no longer increasing,
which seems to indicate that the indexing is. complete. So it should not be an issue of creating a cache file.
Still, Reason 11 Suite vs Reason 12 on two different Macs runs over 400% percent better when you look at the CPU usage.
In addition my fan in Reason 12 is going into overdrive just hitting a few notes of the default Europa patch.
Getting audio clicks all over with R12 as well. At the moment it is honestly unusable on two different Macs (both pretty current, an i9 and an i7). I even tried updating one from Catalina to Big Sur...but no change in R12 performance.
I don't know what else to look at, but I am pretty disappointed. Hopefully this gets fixed soon. In the meantime I have to keep working in R11 Suite, because R12 just straight-up isn't working adequately.
Last edited by Karim on 07 Sep 2021, edited 1 time in total.
Karim Le Mec : Dj/Producer/Label Owner (
11.3 + R12.x + IMac 2016 21")
FOLLOW Karim Le Mec
https://www.youtube.com/user/lemecdj
https://karimlemec.weebly.com/
https://soundcloud.com/karimlemec
https://t.me/reasonstudiosworld
![Reason :reason:](./images/smilies/reason.gif)
FOLLOW Karim Le Mec
https://www.youtube.com/user/lemecdj
https://karimlemec.weebly.com/
https://soundcloud.com/karimlemec
https://t.me/reasonstudiosworld
I've been on board with Reason since 9. I've been upgrading since then, whether point upgrade, or whole number. By and large, the upgrades have fixed and improved the software, and done little if anything to make Reason worse. Little bugs? I can live with them mostly.
But this? Like Tritone, I was planning to give it a week or two just in case. But at the moment, I can't justify dropping $129 for an upgrade that gives us some nice improvements, while causing other problems which are too big to ignore. Especially since I have to re-deploy my Mixer Jaexx maps every time (Reason forces them back to Reason default.)
I know that it's common for users to skip an upgrade from time to time. I get that. But it seems to me that something has changed from 9, 10, and 11, with people now regretful and scrambling back to 11 safety. Was Beta testing ineffective for some reason? I really doubt it. But if RS was getting feedback during testing/UAT, what happened? Up to this point, I haven't had any reason to skip an upgrade since 9. I think $129 is reasonable for an upgrade, but not one that makes the software work worse than before. I would upgrade to 12 for the various enhancements. But not if I have to take crashing along with it. I'm also puzzled that some people seem to be fine with the upgrade, while others are not.
Does anyone else have perspective on this? Are we witnessing a sea change with R12?
But this? Like Tritone, I was planning to give it a week or two just in case. But at the moment, I can't justify dropping $129 for an upgrade that gives us some nice improvements, while causing other problems which are too big to ignore. Especially since I have to re-deploy my Mixer Jaexx maps every time (Reason forces them back to Reason default.)
I know that it's common for users to skip an upgrade from time to time. I get that. But it seems to me that something has changed from 9, 10, and 11, with people now regretful and scrambling back to 11 safety. Was Beta testing ineffective for some reason? I really doubt it. But if RS was getting feedback during testing/UAT, what happened? Up to this point, I haven't had any reason to skip an upgrade since 9. I think $129 is reasonable for an upgrade, but not one that makes the software work worse than before. I would upgrade to 12 for the various enhancements. But not if I have to take crashing along with it. I'm also puzzled that some people seem to be fine with the upgrade, while others are not.
Does anyone else have perspective on this? Are we witnessing a sea change with R12?
- chimp_spanner
- Posts: 3006
- Joined: 06 Mar 2015
I'm one of the weirdos who's happybrand wrote: ↑06 Sep 2021I've been on board with Reason since 9. I've been upgrading since then, whether point upgrade, or whole number. By and large, the upgrades have fixed and improved the software, and done little if anything to make Reason worse. Little bugs? I can live with them mostly.
But this? Like Tritone, I was planning to give it a week or two just in case. But at the moment, I can't justify dropping $129 for an upgrade that gives us some nice improvements, while causing other problems which are too big to ignore. Especially since I have to re-deploy my Mixer Jaexx maps every time (Reason forces them back to Reason default.)
I know that it's common for users to skip an upgrade from time to time. I get that. But it seems to me that something has changed from 9, 10, and 11, with people now regretful and scrambling back to 11 safety. Was Beta testing ineffective for some reason? I really doubt it. But if RS was getting feedback during testing/UAT, what happened? Up to this point, I haven't had any reason to skip an upgrade since 9. I think $129 is reasonable for an upgrade, but not one that makes the software work worse than before. I would upgrade to 12 for the various enhancements. But not if I have to take crashing along with it. I'm also puzzled that some people seem to be fine with the upgrade, while others are not.
Does anyone else have perspective on this? Are we witnessing a sea change with R12?
![Laughing :lol:](./images/smilies/icon_lol.gif)
Wow. Thank you and thanks again for mentioning this.chimp_spanner wrote: ↑06 Sep 2021The biggest improvement for me has been in scrolling or expanding devices in busy projects. That used to create huge spikes. Not so much any more.
I asked so many times in different threads about whether this was cleared up at all and no one replied.
I may actually upgrade after all...but not yet!
Perpetual Reason 12 Beta Tester
You can check out my music here.
https://m.soundcloud.com/ericholmofficial
Or here.
https://www.youtube.com/channel/UC73uZZ ... 8jqUubzsQg
![Reason :reason:](./images/smilies/reason.gif)
You can check out my music here.
https://m.soundcloud.com/ericholmofficial
Or here.
https://www.youtube.com/channel/UC73uZZ ... 8jqUubzsQg
- chimp_spanner
- Posts: 3006
- Joined: 06 Mar 2015
Yeah it was one of the first things I checked! It's a weird one cos like, the program doesn't exactly feel 'lighter'. More like...more solid. Like it holds a consistent level on the DSP rather than freaking out. But yeah totally understand if you wanna wait for a few more updates. I'm far too impatient haha.plaamook wrote: ↑06 Sep 2021Wow. Thank you and thanks again for mentioning this.chimp_spanner wrote: ↑06 Sep 2021The biggest improvement for me has been in scrolling or expanding devices in busy projects. That used to create huge spikes. Not so much any more.
I asked so many times in different threads about whether this was cleared up at all and no one replied.
I may actually upgrade after all...but not yet!
I have some work to finish and it is better for me to complete them with Reason 11. In the meantime I will take a look to update R12 but to work on serious productions it is practically impossible to propose at present (any song of 12-16 tracks between audio and VST takes 6-7 minutes to open only). The demo worked much, much better!!!
chimp_spanner wrote: ↑06 Sep 2021Yeah it was one of the first things I checked! It's a weird one cos like, the program doesn't exactly feel 'lighter'. More like...more solid. Like it holds a consistent level on the DSP rather than freaking out. But yeah totally understand if you wanna wait for a few more updates. I'm far too impatient haha.
Karim Le Mec : Dj/Producer/Label Owner (
11.3 + R12.x + IMac 2016 21")
FOLLOW Karim Le Mec
https://www.youtube.com/user/lemecdj
https://karimlemec.weebly.com/
https://soundcloud.com/karimlemec
https://t.me/reasonstudiosworld
![Reason :reason:](./images/smilies/reason.gif)
FOLLOW Karim Le Mec
https://www.youtube.com/user/lemecdj
https://karimlemec.weebly.com/
https://soundcloud.com/karimlemec
https://t.me/reasonstudiosworld
Same. Deadline work till october so even if I was so inclined I need to stay on 11 for now. Don't really need new toys in he middle of a job.Karim wrote: ↑07 Sep 2021I have some work to finish and it is better for me to complete them with Reason 11. In the meantime I will take a look to update R12 but to work on serious productions it is practically impossible to propose at present (any song of 12-16 tracks between audio and VST takes 6-7 minutes to open only). The demo worked much, much better!!!
Or do I...
Anyway, it's funny that the demo worked better than the paid copy. Is that even possible?
Perpetual Reason 12 Beta Tester
You can check out my music here.
https://m.soundcloud.com/ericholmofficial
Or here.
https://www.youtube.com/channel/UC73uZZ ... 8jqUubzsQg
![Reason :reason:](./images/smilies/reason.gif)
You can check out my music here.
https://m.soundcloud.com/ericholmofficial
Or here.
https://www.youtube.com/channel/UC73uZZ ... 8jqUubzsQg
- esselfortium
- Posts: 1456
- Joined: 15 Jan 2015
- Contact:
Performance has been noticeably worse for me, and when DSP load gets high, it now likes to freeze up my entire computer for a few seconds. If I hadn't already started working in R12 on most of my current projects, I would probably revert to Reason 11 for a while and hope for improvement. I'm on an i9-9900k with 64GB RAM, so I don't think it's my system to blame...
Sarah Mancuso
My music: Future Human
My music: Future Human
-
- Information
-
Who is online
Users browsing this forum: Trendiction [Bot] and 4 guests