Except for the real estate issue, it just seems easier to do it w/o blocks. Then again, asking for this feature is not in any way shape or form undesirable
![Smile :)](./images/smilies/icon_e_smile.gif)
So there is latency on the Spectrum EQ? not noticed but still a relative novice at actually reading one to be fair.Last Alternative wrote:I also wish the mixer's spectrum analyzer wasn't so delayed to respond. It's hard to get a true representation in real time. And I wish it had more frequency points.
You're talking about automation by recording it in then I presume. 'Cause if you want to draw it in, then it's obviously what you need it to do, switch to the sequencer.hydlide wrote:- Checkbox "Are you Rack oriented ?" (preference tab)
If the thing is checked, it doesn't automatic jump back to the sequencer when I right click on a knob and click "Edit automation".
What are you wanting to do down at 20 Hz?Creativemind wrote:So there is latency on the Spectrum EQ? not noticed but still a relative novice at actually reading one to be fair.Last Alternative wrote:I also wish the mixer's spectrum analyzer wasn't so delayed to respond. It's hard to get a true representation in real time. And I wish it had more frequency points.
I also noticed there needs to be more frequency points. More like 7. You can't get down as low as 20hz can you.
I know it would save time but you can just export a midi or audio clip. Be nice if you could just export a midi or audio clip though and not have to export the whole song or delete stuff to get the exact bit you want. S'pose you could bounce it.Leighbeater wrote:I would like to be able to drag audio and midi straight out of the seuqencer onto desktop or into another DAW so I didn't need to rewire
Also would like to able to edit more than one track at once so I could line up audio and midi easier
Wouldn't you like to know haha!selig wrote:What are you wanting to do down at 20 Hz?Creativemind wrote:So there is latency on the Spectrum EQ? not noticed but still a relative novice at actually reading one to be fair.Last Alternative wrote:I also wish the mixer's spectrum analyzer wasn't so delayed to respond. It's hard to get a true representation in real time. And I wish it had more frequency points.
I also noticed there needs to be more frequency points. More like 7. You can't get down as low as 20hz can you.
But you already CAN adjust there: with the HPF and the Low Shelf - and I should add that we can hear/feel MUCH lower than 20 Hz, it's just there's no pitch perception down that low.Creativemind wrote:Wouldn't you like to know haha!selig wrote:What are you wanting to do down at 20 Hz?Creativemind wrote:So there is latency on the Spectrum EQ? not noticed but still a relative novice at actually reading one to be fair.Last Alternative wrote:I also wish the mixer's spectrum analyzer wasn't so delayed to respond. It's hard to get a true representation in real time. And I wish it had more frequency points.
I also noticed there needs to be more frequency points. More like 7. You can't get down as low as 20hz can you.
No, seriously, the audible range of hearing is 20hz-20khz so we should be able to adjust there.
selig wrote:I guess my question would be: what are you recording down there that needs adjusting?Creativemind wrote:Wouldn't you like to know haha!selig wrote:What are you wanting to do down at 20 Hz?Creativemind wrote:So there is latency on the Spectrum EQ? not noticed but still a relative novice at actually reading one to be fair.Last Alternative wrote:I also wish the mixer's spectrum analyzer wasn't so delayed to respond. It's hard to get a true representation in real time. And I wish it had more frequency points.
I also noticed there needs to be more frequency points. More like 7. You can't get down as low as 20hz can you.
No, seriously, the audible range of hearing is 20hz-20khz so we should be able to adjust there.
Subtractor2 and Thor2 would be amazing. To start with, adding up to 6 voices on each, and also a way of converting the frequency cut off on Subtractor into Hz.boobytrap wrote:1. Improvised New M-Class Mastering Suit and Subtractor.
2. New Thor2.
3. Clip Launcher or enhanced Block editor.
4. VCA Faders.
5. Dark & VECTOR Color Themes.
I actually needed this the other day and made a post about it.Leighbeater wrote:I would like to be able to drag audio and midi straight out of the seuqencer onto desktop or into another DAW so I didn't need to rewire
Also would like to able to edit more than one track at once so I could line up audio and midi easier
Yeah just have a full colour pallet like in Abelton or Paint with a little circle to go to any colour you so desireNamahs Amrak wrote:Mp3 rendering at 320k
Reinstatement of patch browsing
Flexibility with the new device browse window location
Native audio-to-MIDI conversion
A bigger color pallette
It's annoying, either use Reason or not in my opinion. They should bring Reason up to the standard of most 2015 daws with features.dvdrtldg wrote:I use other DAWs and am happy enough to work outside of Reason for those tasks it doesn't handle all that well.
There's one thing, and one thing only, that I keep bumping up against and really wish they'd change: too few CV inputs in the Combinator. Four just isn't enough!
Users browsing this forum: No registered users and 0 guests