Nektar Grab mappings, new 2200 maps added

[Carly(Poohbear)]

Dropbox updated..over 2200 NEW maps in total https://www.dropbox.com/sh/sberq7vvyfit ... T4sra?dl=0

YouTube talking about the new Grab method used can be found here...

Files updated
Panorama.remotemap <P4 and P6
PanoramaP1.remotemap <P1

https://www.dropbox.com/sh/sberq7vvyfit ... T4sra?dl=0

This file has to be replace\merged and can be found at:-

Windows: C:\ProgramData\Propellerhead Software\Remote\Maps\Nektar
OSX: //Library/Application Support/Propellerhead Software/Remote/Maps/Nektar


When backing up the existing file, back it up to a totally new directory (there have been issues reported if backing up in place).

Up on the DropBox location there are 3 other directories

Comment Plates
This contains comments for the RE\VST in question (Not a complete list),
it used the free TMA-9 Commentator by Jiggery-Pokery https://shop.propellerheads.se/rack-ext ... mmentator/

individual Mappings
This contains individual RE maps (Not a complete list)

individual VST Mappings
This contains individual VST Mappings (not a complete list)



PoohBear

-------------------------------------------------------------------------------------------------------
Recent Music made with Reason
(Electronic) Poly Madness
(Electronic) Solar Dance
(Electronic) Into The Night
(Upbeat) The Players Took Me There Made in Reason 9 with heavy use of the players
(Electronic) 5 Steps (Video added) Updated
------------------------------------------------------------------------------------------
My Soundcloud Page ....... Nektar Mappings
------------------------------------------------------------------------------------------

[Catblack]

This is fantastic! I'm going to have to buy a Panorama this year. Did you use data from that project I set up? I'm glad someone got something out of it if you did. I have pretty much abandoned it (for now.)

Can't wait to see your other surprise!

[Carly(Poohbear)]

This is fantastic! I'm going to have to buy a Panorama this year. Did you use data from that project I set up? I'm glad someone got something out of it if you did. I have pretty much abandoned it (for now.)

Can't wait to see your other surprise!

Yes I did and thanks for setting that up, there are a few duplication's, I added all the files to a MSSQL db which made it a lot easier to manage which of course you are more than happy to have a copy of or an Export of..

There is also another funny going on with Reason and scopes, EG.
These 2 devices clash
Scope FutureAudioWorkshop vst.Plug.Circle2
Scope synthANDware vst.Plug.WaveSynthPlug

They clash as both short names vst.plug are the same, one would have thought that Reason should have made the scope manufacturers name and model name!!!!! Not sure what other DAW's do about scopes...
and again there are few of these scopes..

[Catblack]

Well my P4 got here and I'm already in love. I'm still getting used to the workflow, have no idea how to get the motorized fader working... but that random button... wow.

[Carly(Poohbear)]

Well my P4 got here and I'm already in love. I'm still getting used to the workflow, have no idea how to get the motorized fader working... but that random button... wow.

You have to have 2 USB cables hooked up to use the motorised fader..

Note I have not used the motorised fader for at least a couple of years now, it's just something I did not use..

[Catblack]

Well my P4 got here and I'm already in love. I'm still getting used to the workflow, have no idea how to get the motorized fader working... but that random button... wow.

You have to have 2 USB cables hooked up to use the motorised fader..

Note I have not used the motorised fader for at least a couple of years now, it's just something I did not use..

I think my issue was I didn't have the mixer locked to the device. All working great now. (And I still can't get over having a little poltergeist moving it when I open a new file!)

[Carly(Poohbear)]

And I still can't get over having a little poltergeist moving it when I open a new file!

[bxbrkrz]

Dropbox updated..over 2200 NEW maps in total https://www.dropbox.com/sh/sberq7vvyfit ... T4sra?dl=0

YouTube talking about the new Grab method used can be found here...

Files updated
Panorama.remotemap <P4 and P6
PanoramaP1.remotemap <P1

https://www.dropbox.com/sh/sberq7vvyfit ... T4sra?dl=0

This file has to be replace\merged and can be found at:-

Windows: C:\ProgramData\Propellerhead Software\Remote\Maps\Nektar
OSX: //Library/Application Support/Propellerhead Software/Remote/Maps/Nektar


When backing up the existing file, back it up to a totally new directory (there have been issues reported if backing up in place).

Up on the DropBox location there are 3 other directories

Comment Plates
This contains comments for the RE\VST in question (Not a complete list),
it used the free TMA-9 Commentator by Jiggery-Pokery https://shop.propellerheads.se/rack-ext ... mmentator/

individual Mappings
This contains individual RE maps (Not a complete list)

individual VST Mappings
This contains individual VST Mappings (not a complete list)



PoohBear

-------------------------------------------------------------------------------------------------------
Recent Music made with Reason
(Electronic) Poly Madness
(Electronic) Solar Dance
(Electronic) Into The Night
(Upbeat) The Players Took Me There Made in Reason 9 with heavy use of the players
(Electronic) 5 Steps (Video added) Updated
------------------------------------------------------------------------------------------
My Soundcloud Page ....... Nektar Mappings
------------------------------------------------------------------------------------------

Great work. Could the maps be partially Impact LX+ compatible or Panorama only? Sorry if that was already answered.

[Carly(Poohbear)]

Great work. Could the maps be partially Impact LX+ compatible or Panorama only? Sorry if that was already answered.

P series only.

I have never looked at impact remote mapping file, feel free to attach one here..

[AttenuationHz]

Here's a map for Selig's new RE out soon.

Code: Select all

//************************************************************************
//***********************   Mapping by Atten   ***************************
//*******************************  V 1.0  ********************************
//************************************************************************
Scope	Selig Audio	com.seligaudio.ColoringEQ

Define Group	Mode	Instrument	Mixer	Transport	Channel
Define Group	force_patch_Feedback	Patch 1	Patch 2
Define Group	Ch_knob_view	Q_view	Drive_view	Level_view	Gain_view	Seq_view
Define Group	Button_mode	Band_Bypass	Sat_Solo	Other_but
Define Group	Spec_Mode	Spec_on	Spec_fast	Spec_FastOFF	Spec_OFF
Define Group	Views	But_Seq	Name_Sat	Name_Bypass


Map	Mixer Mode		Mode=Mixer
Map	Instrument Mode		Mode=Instrument
Map	Transport Mode		Mode=Transport
Map	Channel Mode		Mode=Channel

Map	Device Name		"ColoringEQ"		MIXER
Map	Patch Name		Patch Name			Instrument	Patch 1
Map	Patch Name		Patch Name			Instrument	Patch 2
Map	Bypass		Enabled					Instrument

Map	Data Encoder		Fine Tune		NORMAL	Instrument
Map	Encoder Select Up		Peak Hold Manual Reset		TRIG	Instrument
Map	Button Select Up		Spectrum Hold		TRIG	Instrument


Map	X1_Labeli		"Bypass"			Instrument
Map	X1		0		BYPASS	Instrument

Map	X2_Labeli		"Gains"			Instrument	Q_view
Map	X2_Labeli		"Q"			Instrument	Drive_view
Map	X2_Labeli		"SatDrive"			Instrument	Level_view
Map	X2_Labeli		"SatLevel"			Instrument	Gain_view
Map	X2		Ch_knob_view=Gain_view		INST	Instrument	Q_view
Map	X2		Ch_knob_view=Q_view		INST	Instrument	Drive_view
Map	X2		Ch_knob_view=Drive_view		INST	Instrument	Level_view
Map	X2		Ch_knob_view=Level_view		INST	Instrument	Gain_view
//*****Note: order is Gains→SatLevel→SatDrive→Q, I was trying to get it to be Gains→Q→SatDrive→SatLevel but lost patience...

Map	X3_Labeli		"Type/On"			Instrument	Name_Sat
Map	X3_Labeli		"Solo's"			Instrument	But_Seq
Map	X3_Labeli		"Seq/2Flt"			Instrument	Name_Bypass
Map	X3		Views=Name_Bypass		MIXER	Instrument	Name_Sat
Map	X3		Views=Name_Sat		FADERS	Instrument	But_Seq
Map	X3		Views=But_Seq		FADERS	Instrument	Name_Bypass

//Stereo	MidEQ	SideEQ	MidOnly	SideOnly
Map	X4_Labeli		"Routing"			Instrument
Map	X4		Routing Mode		NORMAL	Instrument

Map	X5_Labeli		"Spec Mode"			Instrument	Spec_fast
Map	X5_Labeli		"Spec Mode"			Instrument	Spec_FastOFF
Map	X5_Labeli		"Spec Mode"			Instrument	Spec_OFF
Map	X5_Labeli		"Spec Mode"			Instrument	Spec_on
Map	X5_ch		Spec_Mode=Spec_on			Instrument	Spec_fast
Map	X5_ch		Spec_Mode=Spec_fast			Instrument	Spec_FastOFF
Map	X5_ch		Spec_Mode=Spec_FastOFF			Instrument	Spec_OFF
Map	X5_ch		Spec_Mode=Spec_OFF			Instrument	Spec_on
Map	X5		Spectrum Enable		NORMAL	Instrument	Spec_fast
Map	X5		Spectrum Fast		TOGGLE_ON	Instrument	Spec_on
Map	X5		Spectrum Fast		TOGGLE_OFF	Instrument	Spec_FastOFF
Map	X5		Spectrum Enable		NORMAL	Instrument	Spec_OFF


//Page Tune********************************************************
Map	Page Name		"Gain"			Instrument	Gain_view
Map	Name Element 1		"In"			Instrument	Gain_view
Map	Name Element 2		"EQ1 Gain"			Instrument	Gain_view
Map	Name Element 3		"EQ2 Gain"			Instrument	Gain_view
Map	Name Element 4		"EQ3 Gain"			Instrument	Gain_view
Map	Name Element 5		"EQ4 Gain"			Instrument	Gain_view
Map	Name Element 6		"EQ5 Gain"			Instrument	Gain_view
Map	Name Element 7		"Master Gain"			Instrument	Gain_view
Map	Name Element 8		"Out"			Instrument	Gain_view
Map	Ch Knob 1		Input Level		NAME	Instrument	Gain_view
Map	Ch Knob 2		EQ1 Gain		NAME	Instrument	Gain_view
Map	Ch Knob 3		EQ2 Gain		NAME	Instrument	Gain_view
Map	Ch Knob 4		EQ3 Gain		NAME	Instrument	Gain_view
Map	Ch Knob 5		EQ4 Gain		NAME	Instrument	Gain_view
Map	Ch Knob 6		EQ5 Gain		NAME	Instrument	Gain_view
Map	Ch Knob 7		Master Gain		NAME	Instrument	Gain_view
Map	Ch Knob 8		Output Level		NAME	Instrument	Gain_view
//Page Q**************************************************************
Map	Page Name		"Q"			Instrument	Q_view
Map	Name Element 1		"F1 Q"			Instrument	Q_view
Map	Name Element 2		"EQ1 Q"			Instrument	Q_view
Map	Name Element 3		"EQ2 Q"			Instrument	Q_view
Map	Name Element 4		"EQ3 Q"			Instrument	Q_view
Map	Name Element 5		"EQ4 Q"			Instrument	Q_view
Map	Name Element 6		"EQ5 Q"			Instrument	Q_view
Map	Name Element 7		"F2 Q"			Instrument	Q_view
Map	Name Element 8		"Master Q"			Instrument	Q_view
Map	Ch Knob 1		F1 Q		NAME	Instrument	Q_view
Map	Ch Knob 2		EQ1 Q		NAME	Instrument	Q_view
Map	Ch Knob 3		EQ2 Q		NAME	Instrument	Q_view
Map	Ch Knob 4		EQ3 Q		NAME	Instrument	Q_view
Map	Ch Knob 5		EQ4 Q		NAME	Instrument	Q_view
Map	Ch Knob 6		EQ5 Q		NAME	Instrument	Q_view
Map	Ch Knob 7		F2 Q		NAME	Instrument	Q_view
Map	Ch Knob 8		Master Q		NAME	Instrument	Q_view
//Page Level*******************************************************
Map	Page Name		"SatLvl"			Instrument	Level_view
Map	Name Element 1		"F1 Slope"			Instrument	Level_view
Map	Name Element 2		"EQ1 Level"			Instrument	Level_view
Map	Name Element 3		"EQ2 Level"			Instrument	Level_view
Map	Name Element 4		"EQ3 Level"			Instrument	Level_view
Map	Name Element 5		"EQ4 Level"			Instrument	Level_view
Map	Name Element 6		"EQ5 Level"			Instrument	Level_view
Map	Name Element 7		"F2 Slope"			Instrument	Level_view
Map	Name Element 8		"MastLev"			Instrument	Level_view
Map	Ch Knob 1		F1 Slope		NAME	Instrument	Level_view
Map	Ch Knob 2		EQ1 Level		NAME	Instrument	Level_view
Map	Ch Knob 3		EQ2 Level		NAME	Instrument	Level_view
Map	Ch Knob 4		EQ3 Level		NAME	Instrument	Level_view
Map	Ch Knob 5		EQ4 Level		NAME	Instrument	Level_view
Map	Ch Knob 6		EQ5 Level		NAME	Instrument	Level_view
Map	Ch Knob 7		F2 Slope		NAME	Instrument	Level_view
Map	Ch Knob 8		Master level		NAME	Instrument	Level_view
//Page Drive***********************************************************
Map	Page Name		"SatDrive"			Instrument	Drive_view
Map	Name Element 1		"F1 Route"			Instrument	Drive_view
Map	Name Element 2		"EQ1 Drive"			Instrument	Drive_view
Map	Name Element 3		"EQ2 Drive"			Instrument	Drive_view
Map	Name Element 4		"EQ3 Drive"			Instrument	Drive_view
Map	Name Element 5		"EQ4 Drive"			Instrument	Drive_view
Map	Name Element 6		"EQ5 Drive"			Instrument	Drive_view
Map	Name Element 7		"F2 Route"			Instrument	Drive_view
Map	Name Element 8		"Master Drive"			Instrument	Drive_view
Map	Ch Knob 1		F1 Routing		NAME	Instrument	Drive_view
Map	Ch Knob 2		EQ1 Drive		NAME	Instrument	Drive_view
Map	Ch Knob 3		EQ2 Drive		NAME	Instrument	Drive_view
Map	Ch Knob 4		EQ3 Drive		NAME	Instrument	Drive_view
Map	Ch Knob 5		EQ4 Drive		NAME	Instrument	Drive_view
Map	Ch Knob 6		EQ5 Drive		NAME	Instrument	Drive_view
Map	Ch Knob 7		F2 Routing		NAME	Instrument	Drive_view
Map	Ch Knob 8		Master Drive		NAME	Instrument	Drive_view

//Encoders  Routing & Filter type***********************
Map	Knob 1		0		NAME	Instrument
Map	Knob 2		F1 Type 		NAME	Instrument
Map	Knob 3		EQ1 Type		NAME	Instrument
Map	Knob 4		EQ2 Type		NAME	Instrument
Map	Knob 5		EQ3 Type		NAME	Instrument
Map	Knob 6		EQ4 Type		NAME	Instrument
Map	Knob 7		EQ5 Type		NAME	Instrument
Map	Knob 8		F2 Type 		NAME	Instrument

//Fader Names**************************************************
Map	Fader Name Element 1		"Harm"		FADERS	Instrument
Map	Fader Name Element 2		"F1 "		FADERS	Instrument
Map	Fader Name Element 3		"EQ1"		FADERS	Instrument
Map	Fader Name Element 4		"EQ2"		FADERS	Instrument
Map	Fader Name Element 5		"EQ3"		FADERS	Instrument
Map	Fader Name Element 6		"EQ4"		FADERS	Instrument
Map	Fader Name Element 7		"EQ5"		FADERS	Instrument
Map	Fader Name Element 8		"F2"		FADERS	Instrument
//Faders 1-9 Tune*********************************************
Map	Fader 1		Harmonics Control		NAME	Instrument
Map	Fader 2		F1 Tune		NAME	Instrument
Map	Fader 3		EQ1 Tune		NAME	Instrument
Map	Fader 4		EQ2 Tune		NAME	Instrument
Map	Fader 5		EQ3 Tune		NAME	Instrument
Map	Fader 6		EQ4 Tune		NAME	Instrument
Map	Fader 7		EQ5 Tune		NAME	Instrument
Map	Fader 8		F2 Tune		NAME	Instrument
Map	Fader 9		Master Tune		NAME	Instrument


//Button Name*********************************************************************
Map	Fader Name Element 9		"On"		FADERS	Instrument	Name_Bypass
Map	Fader Name Element 10		"F1"		FADERS	Instrument	Name_Bypass
Map	Fader Name Element 11		"1"		FADERS	Instrument	Name_Bypass
Map	Fader Name Element 12		"2"		FADERS	Instrument	Name_Bypass
Map	Fader Name Element 13		"3"		FADERS	Instrument	Name_Bypass
Map	Fader Name Element 14		"4"		FADERS	Instrument	Name_Bypass
Map	Fader Name Element 15		"5"		FADERS	Instrument	Name_Bypass
Map	Fader Name Element 16		"F2"		FADERS	Instrument	Name_Bypass
Map	Fader Name Element 9		"SatOn"		FADERS	Instrument	Name_Sat
Map	Fader Name Element 10		"Auto"		FADERS	Instrument	Name_Sat
Map	Fader Name Element 11		"Sat1"		FADERS	Instrument	Name_Sat
Map	Fader Name Element 12		"Sat2"		FADERS	Instrument	Name_Sat
Map	Fader Name Element 13		"Sat3"		FADERS	Instrument	Name_Sat
Map	Fader Name Element 14		"Sat4"		FADERS	Instrument	Name_Sat
Map	Fader Name Element 15		"Sat5"		FADERS	Instrument	Name_Sat
Map	Fader Name Element 16		"Mast"		FADERS	Instrument	Name_Sat
Map	Fader Name Element 9		"Note"		FADERS	Instrument	But_Seq
Map	Fader Name Element 10		"Gate"		FADERS	Instrument	But_Seq
Map	Fader Name Element 11		"Dest"		FADERS	Instrument	But_Seq
Map	Fader Name Element 12		""		FADERS	Instrument	But_Seq
Map	Fader Name Element 13		""		FADERS	Instrument	But_Seq
Map	Fader Name Element 14		"G2F"		FADERS	Instrument	But_Seq
Map	Fader Name Element 15		"T2F"		FADERS	Instrument	But_Seq
Map	Fader Name Element 16		"Q2F"		FADERS	Instrument	But_Seq
//*****  EQ Enables****************************************************************
Map	Button 1		EQ Enable		NAME	Instrument	Name_Bypass
Map	Button 2		F1 Enable		NAME	Instrument	Name_Bypass
Map	Button 3		EQ1 Enable		NAME	Instrument	Name_Bypass
Map	Button 4		EQ2 Enable		NAME	Instrument	Name_Bypass
Map	Button 5		EQ3 Enable		NAME	Instrument	Name_Bypass
Map	Button 6		EQ4 Enable		NAME	Instrument	Name_Bypass
Map	Button 7		EQ5 Enable		NAME	Instrument	Name_Bypass
Map	Button 8		F2 Enable		NAME	Instrument	Name_Bypass
//*****  Saturation Solo***********************************************************
Map	Button 1		Saturation Enable		NAME	Instrument	Name_Sat
Map	Button 2		Peak Hold Auto Reset		NAME	Instrument	Name_Sat
Map	Button 3		EQ1 Solo		NAME	Instrument	Name_Sat
Map	Button 4		EQ2 Solo		NAME	Instrument	Name_Sat
Map	Button 5		EQ3 Solo		NAME	Instrument	Name_Sat
Map	Button 6		EQ4 Solo		NAME	Instrument	Name_Sat
Map	Button 7		EQ5 Solo		NAME	Instrument	Name_Sat
Map	Button 8		Master Solo		NAME	Instrument	Name_Sat
//*****  To Filters****************************************************************
Map	Button 1		Sequencer Control Note		NAME	Instrument	But_Seq
Map	Button 2		Sequencer Control Gate		NAME	Instrument	But_Seq
Map	Button 3		Sequencer Control Dest		NAME	Instrument	But_Seq
Map	Button 4		0		NAME	Instrument	But_Seq
Map	Button 5		0		NAME	Instrument	But_Seq
Map	Button 6		Gain To Filters		NAME	Instrument	But_Seq
Map	Button 7		Tune To Filters		NAME	Instrument	But_Seq
Map	Button 8		Q To Filters		NAME	Instrument	But_Seq


//Might be one or two more features added since beta.
//**********************************************************************************
//********************************** THAT IS ALL ***********************************
//**********************************************************************************

http://www.seligaudio.com/products.html

[Carly(Poohbear)]

Here's a map for Selig's new RE out soon.

http://www.seligaudio.com/products.html

Thanks, added and dropbox updated.

[jm245]

Hello, I just bought the P6. I found this amazing post here, but I cannot understand some things (Im total new to midi keyboards etc)
So correct me if I'm wrong:
from all of these files, which ones should I replace with my installed in order to make P6 work better in REs and VSTS that I run in Reason?

If only replace the "Panorama.remotemap" file am I good to go? Or do I have to replace any other files for the Vsts?
(I run all my vsts through reason , vsts such as Korg Legacy, Dune, Kontakt vsts etc)

Reason 10.4, win10.

thanks

[Carly(Poohbear)]

Hello, I just bought the P6. I found this amazing post here, but I cannot understand some things (Im total new to midi keyboards etc)
So correct me if I'm wrong:
from all of these files, which ones should I replace with my installed in order to make P6 work better in REs and VSTS that I run in Reason?

If only replace the "Panorama.remotemap" file am I good to go? Or do I have to replace any other files for the Vsts?
(I run all my vsts through reason , vsts such as Korg Legacy, Dune, Kontakt vsts etc)

Reason 10.4, win10.

thanks

Correct just the "Panorama.remotemap" just needs replacing (just make sure you have the latest firmware).
Note devices like Kontakt are not mapped as they can be any one of million different combinations..
If the P6 says no mapping, then there is not a map however you get some maps where nothing is mapped out and you need to grab your controls for them to work.

[Carly(Poohbear)]

FYI Dropped box updated notes here..

Code: Select all

https://www.facebook.com/notes/nektar-users/nektar-mappings-for-reason-users/2328963463806635/

[jm245]

thank you Carly!
I just replaced the file with yours!

When Im using Korg Legacy Collection, Polysix , when play from the (virtual) keybed of the vst, the sound is more fat and rich, when I play from the keybed of P6 the sound is not that strong ? Why? (the p6 screen displays VCFCUTOFF 28.9%, when I switch the knob to 63% only then sounds the same with the virtual keybed.
Another way to make it sound the same is to hit very hard the keybed of P6 (velocity sensitive), but I dont want to hit it hard every time I load the vst.

1.Is there a way to make it sound each time i load this vst, the same as the sounding of the virtual keybed? Because I like the starting point of sound that the virtual keybed has.


I hope that you can understand what Im trying to say. Sorry for my bad english

I also noticed that in some vsts (like Dune) I cannot load/change the patch using the DATA knob of p6. why?

thanks

[Carly(Poohbear)]

thank you Carly!
I just replaced the file with yours!

When Im using Korg Legacy Collection, Polysix , when play from the (virtual) keybed of the vst, the sound is more fat and rich, when I play from the keybed of P6 the sound is not that strong ? Why? (the p6 screen displays VCFCUTOFF 28.9%, when I switch the knob to 63% only then sounds the same with the virtual keybed.
Another way to make it sound the same is to hit very hard the keybed of P6 (velocity sensitive), but I dont want to hit it hard every time I load the vst.

1.Is there a way to make it sound each time i load this vst, the same as the sounding of the virtual keybed? Because I like the starting point of sound that the virtual keybed has.


I hope that you can understand what Im trying to say. Sorry for my bad english

I also noticed that in some vsts (like Dune) I cannot load/change the patch using the DATA knob of p6. why?

thanks

You can change the velocity sensitivity of the P series via setup.
I would as a test set the velocity to fixed and make it the same as the virtual keyboard as I think this will also sort out your cutoff.

You can also change the velocity via players like the extremely excellent Delta or the Midi Compressor.

[jm245]

[/quote]

You can change the velocity sensitivity of the P series via setup.
I would as a test set the velocity to fixed and make it the same as the virtual keyboard as I think this will also sort out your cutoff.

You can also change the velocity via players like the extremely excellent Delta or the Midi Compressor.
[/quote]

Well If i told you that I dont understand a thing... would you laugh?

Please understand that I am total new to daws and midis. If you can explain a little more of what to do, it would be great help. I thought of sending you this reply inbox because it is embarassing, then I thought that there might someone else like me who is beginner and this might help him too.
Anyway thanks again for your posts and help. I have subscribed to your yt channel. Its great.

[Carly(Poohbear)]

Well If i told you that I dont understand a thing... would you laugh?

Please understand that I am total new to daws and midis. If you can explain a little more of what to do, it would be great help. I thought of sending you this reply inbox because it is embarassing, then I thought that there might someone else like me who is beginner and this might help him too.
Anyway thanks again for your posts and help. I have subscribed to your yt channel. Its great.

On the P6
hit the "Internal" button.
select "Setup"
select "Global"
Use the down arrows to navigate to "Velocity Curve"
Use the Data knob and change it to "Fixed" and test with that. I run mine on "Hard 2".

[MrFigg]

Will these mappings also work on the Panorama T4?

[Carly(Poohbear)]

Will these mappings also work on the Panorama T4?

Yes, just download the correct file (Panorama2.remotemap) for the T series, check out the facebook link.

[MrFigg]

Will these mappings also work on the Panorama T4?

Yes, just download the correct file (Panorama2.remotemap) for the T series, check out the facebook link.

Thanks Carly . Is there a list of the plugins aupported?
Edit: sorry...can’t find the FB link.

Edit: googled. Found it

[Carly(Poohbear)]

Yes, just download the correct file (Panorama2.remotemap) for the T series, check out the facebook link.

Thanks Carly . Is there a list of the plugins aupported?
Edit: sorry...can’t find the FB link.

Edit: googled. Found it

1) the FB link was in an above post
2) at the dropbox location there is a text file called scopelisting.txt, it's a little out of date, might be missing no more than about 50 scopes.

[gkillmaster]

The mappings file was empty when I tried to download it. Are these maps somewhere else now? If not, where is the best place to find mappings these days?

[Carly(Poohbear)]

The mappings file was empty when I tried to download it. Are these maps somewhere else now? If not, where is the best place to find mappings these days?

Someone by mistake had removed them, all restored now.

[gkillmaster]

The mappings file was empty when I tried to download it. Are these maps somewhere else now? If not, where is the best place to find mappings these days?

Someone by mistake had removed them, all restored now.

Thanks so much!!!