CV Player Tap, free from Lectric Panda
- theshoemaker
- Posts: 595
- Joined: 21 Nov 2015
- Location: Germany
- Contact:
C'mon Loque ... you really didn't think about this before
latest V12 on MacOS Ventura
PSQ did not reached the 100% connection state in my brain as a CV source in general, as a sequencer, CV manipulator or CV curve generator. I am working on it... Still did not tested to use it as quantizer
Reason12, Win10
- theshoemaker
- Posts: 595
- Joined: 21 Nov 2015
- Location: Germany
- Contact:
This is my current base setup for experimental stuff: 2 PSQ instances with the sequencers connected to all 16 in ports of CVPT.
With a Nostromo for extra randomization. Feel free to replace it with another synth
On Nostromo in the Randomization options for modulation the source and dest pool is set to C1-CV8.
The Nostromo outs signals CV1-CV8 are split and connected to the both PSQ instances CV1-CV8 (which are also chained for sync).
The Nostromo in signals are CV1-4 from PSQ instance 1 and CV5-8 from instance 2.
Sequencers are connected from S1-S8 with pads A1-B4.
I wouldn't start heavy on the PSQ randomizatoin. I'm randomizing and finetuning pad by pad.
With a Nostromo for extra randomization. Feel free to replace it with another synth
On Nostromo in the Randomization options for modulation the source and dest pool is set to C1-CV8.
The Nostromo outs signals CV1-CV8 are split and connected to the both PSQ instances CV1-CV8 (which are also chained for sync).
The Nostromo in signals are CV1-4 from PSQ instance 1 and CV5-8 from instance 2.
Sequencers are connected from S1-S8 with pads A1-B4.
I wouldn't start heavy on the PSQ randomizatoin. I'm randomizing and finetuning pad by pad.
- Attachments
-
- PSQ CVPT.cmb.zip
- (31.37 KiB) Downloaded 107 times
latest V12 on MacOS Ventura
Hello!
I have discovered CVTP a few hours ago and I'm trying to use it in order to use Redrum to sequence Drumazon / Nepheton. While I understand the concept, I'm scratching my head over something at the moment.
I have linked all the Redrum's 10 CV out to the 10 first CV in of CVTP and, among the 16 sounds available in Nepheton, CVTP seems to only be linked to 4 or 5 of them, often repeated (5 and 8 is the snares, 1 and 9 is the kick).
Is there something I'm missing?
Thanks in advance,
I have discovered CVTP a few hours ago and I'm trying to use it in order to use Redrum to sequence Drumazon / Nepheton. While I understand the concept, I'm scratching my head over something at the moment.
I have linked all the Redrum's 10 CV out to the 10 first CV in of CVTP and, among the 16 sounds available in Nepheton, CVTP seems to only be linked to 4 or 5 of them, often repeated (5 and 8 is the snares, 1 and 9 is the kick).
Is there something I'm missing?
Thanks in advance,
I don't know anything about Nepheton, but I would suspect the MIDI notes do not align correctly. CVPT by default will map unconnected note values to Redrum and Kongs MIDI pads mapping rooted at (C1 36). You are probably going to need to hook aSunsiare wrote: ↑26 Jul 2018Hello!
I have discovered CVTP a few hours ago and I'm trying to use it in order to use Redrum to sequence Drumazon / Nepheton. While I understand the concept, I'm scratching my head over something at the moment.
I have linked all the Redrum's 10 CV out to the 10 first CV in of CVTP and, among the 16 sounds available in Nepheton, CVTP seems to only be linked to 4 or 5 of them, often repeated (5 and 8 is the snares, 1 and 9 is the kick).
Is there something I'm missing?
Thanks in advance,
https://shop.propellerheads.se/rack-ext ... generator/
up to the CVPT to override those MIDI note values to match Nepheton.
- Carly(Poohbear)
- Competition Winner
- Posts: 2888
- Joined: 25 Jan 2015
- Location: UK
You can arm multiple tracks and record at the same time, just remember you can't record a CV signal straight.
-
- Posts: 871
- Joined: 21 Jan 2015
New Update:
"Fixed bug that caused successive notes without gaps to merge."
Now how was that handled before and after?
i noticed when i had a long gate coming into Gate Input 1 and while the gate was on the corresponding notevalue changed, i got mutliple gate outs in the output section. But is that right as there are no additional original gates, just the one long one? I would assume just the notevalue on the output side changes.
"Fixed bug that caused successive notes without gaps to merge."
Now how was that handled before and after?
i noticed when i had a long gate coming into Gate Input 1 and while the gate was on the corresponding notevalue changed, i got mutliple gate outs in the output section. But is that right as there are no additional original gates, just the one long one? I would assume just the notevalue on the output side changes.
I notice a few people have mentioned that it may be possible to capture midi data on a track from the CV outputs generated from a device.
I’m trying to do this with uJam Eden using its multiple CV outs so I can edit and add some variety to the patterns but can’t seem to print the pattern to the track.
Is this possible with CV Player Tap or am I expecting too much?
I’m trying to do this with uJam Eden using its multiple CV outs so I can edit and add some variety to the patterns but can’t seem to print the pattern to the track.
Is this possible with CV Player Tap or am I expecting too much?
- Carly(Poohbear)
- Competition Winner
- Posts: 2888
- Joined: 25 Jan 2015
- Location: UK
You could the CV player Tap or any player to do this sort of thing.Iggster wrote: ↑30 Aug 2018I notice a few people have mentioned that it may be possible to capture midi data on a track from the CV outputs generated from a device.
I’m trying to do this with uJam Eden using its multiple CV outs so I can edit and add some variety to the patterns but can’t seem to print the pattern to the track.
Is this possible with CV Player Tap or am I expecting too much?
This should point you in the right direction.
and this one
Really I should do and will do an up to date video (I'll do it using the Ujam Eden ) as looking at it you should be able to bypass the Mopol and use the CV tap directly..
PoohBear
----------------------------------------------------------------------------------------------------------
T&T's viewtopic.php?f=5&t=7503909
My Youtube channel https://www.youtube.com/channel/UCqCNsA ... p4cQF4j-8A
----------------------------------------------------------------------------------------------------------
My Soundcloud Page ....... Nektar Mappings
----------------------------------------------------------------------------------------------------------
- Carly(Poohbear)
- Competition Winner
- Posts: 2888
- Joined: 25 Jan 2015
- Location: UK
Just downloaded the Eden had a quick look, in fact it's very easy with the CV tap, will do a quick tip video now.Carly(Poohbear) wrote: ↑31 Aug 2018You could the CV player Tap or any player to do this sort of thing.Iggster wrote: ↑30 Aug 2018I notice a few people have mentioned that it may be possible to capture midi data on a track from the CV outputs generated from a device.
I’m trying to do this with uJam Eden using its multiple CV outs so I can edit and add some variety to the patterns but can’t seem to print the pattern to the track.
Is this possible with CV Player Tap or am I expecting too much?
This should point you in the right direction.
and this one
Really I should do and will do an up to date video (I'll do it using the Ujam Eden ) as looking at it you should be able to bypass the Mopol and use the CV tap directly..
PoohBear
----------------------------------------------------------------------------------------------------------
T&T's viewtopic.php?f=5&t=7503909
My Youtube channel https://www.youtube.com/channel/UCqCNsA ... p4cQF4j-8A
----------------------------------------------------------------------------------------------------------
My Soundcloud Page ....... Nektar Mappings
----------------------------------------------------------------------------------------------------------
- Boombastix
- Competition Winner
- Posts: 1929
- Joined: 18 May 2018
- Location: Bay Area, CA
I had note and CV connected to the CV Tap, played and disconnected som wires while notes were played. That caused the CV Tap to have hung notes. Maybe good idea to kill the notes/gates on the output once the wire is disconnected and/or include a separate kill all button?
10% off at Waves with link: https://www.waves.com/r/6gh2b0
Disclaimer - I get 10% as well.
Disclaimer - I get 10% as well.
On button off before wires disconnect.
Odd, contact the props because that seems like some sort of bug with the shop. 1.0.3 was released before 10.2 so their might be some sort of issue with it thinking Lite 10.2 isn't compatible.
- Biolumin3sc3nt
- Posts: 662
- Joined: 16 Jan 2015
Panda... I hope you're still reading this, but I'm having a problem using the latest version of CVPT with ABL3. The first version worked perfectly with slides and everything, but now when i connect it to the latest version, the pattern from ABL3 to CVPT is messed up.
Let me know if you have ABL3, and try it for yourself. I can also send a file as well. Thanx
Let me know if you have ABL3, and try it for yourself. I can also send a file as well. Thanx
Shoot an email over to support@lectricpanda.com with your file and we can take a look.Biolumin3sc3nt wrote: ↑28 Sep 2018Panda... I hope you're still reading this, but I'm having a problem using the latest version of CVPT with ABL3. The first version worked perfectly with slides and everything, but now when i connect it to the latest version, the pattern from ABL3 to CVPT is messed up.
Let me know if you have ABL3, and try it for yourself. I can also send a file as well. Thanx
- Biolumin3sc3nt
- Posts: 662
- Joined: 16 Jan 2015
Thanx, will do later this evening!!rcbuse wrote: ↑28 Sep 2018Shoot an email over to support@lectricpanda.com with your file and we can take a look.Biolumin3sc3nt wrote: ↑28 Sep 2018Panda... I hope you're still reading this, but I'm having a problem using the latest version of CVPT with ABL3. The first version worked perfectly with slides and everything, but now when i connect it to the latest version, the pattern from ABL3 to CVPT is messed up.
Let me know if you have ABL3, and try it for yourself. I can also send a file as well. Thanx
instead of the CV4X4 to generate the note data, one can also use the One-Note Stand RE to generate the note data from the sequencer or keyboard input : https://shop.propellerheads.se/rack-ext ... ote-stand/Carly(Poohbear) wrote: ↑31 Aug 2018You could the CV player Tap or any player to do this sort of thing.Iggster wrote: ↑30 Aug 2018I notice a few people have mentioned that it may be possible to capture midi data on a track from the CV outputs generated from a device.
I’m trying to do this with uJam Eden using its multiple CV outs so I can edit and add some variety to the patterns but can’t seem to print the pattern to the track.
Is this possible with CV Player Tap or am I expecting too much?
This should point you in the right direction.
and this one
Really I should do and will do an up to date video (I'll do it using the Ujam Eden ) as looking at it you should be able to bypass the Mopol and use the CV tap directly..
PoohBear
----------------------------------------------------------------------------------------------------------
T&T's viewtopic.php?f=5&t=7503909
My Youtube channel https://www.youtube.com/channel/UCqCNsA ... p4cQF4j-8A
----------------------------------------------------------------------------------------------------------
My Soundcloud Page ....... Nektar Mappings
----------------------------------------------------------------------------------------------------------
- Carly(Poohbear)
- Competition Winner
- Posts: 2888
- Joined: 25 Jan 2015
- Location: UK
So replace the CV8x4 with 8 One-Note Stands....Emian wrote: ↑01 Oct 2018instead of the CV4X4 to generate the note data, one can also use the One-Note Stand RE to generate the note data from the sequencer or keyboard input : https://shop.propellerheads.se/rack-ext ... ote-stand/Carly(Poohbear) wrote: ↑31 Aug 2018
You could the CV player Tap or any player to do this sort of thing.
This should point you in the right direction.
and this one
Really I should do and will do an up to date video (I'll do it using the Ujam Eden ) as looking at it you should be able to bypass the Mopol and use the CV tap directly..
PoohBear
----------------------------------------------------------------------------------------------------------
T&T's viewtopic.php?f=5&t=7503909
My Youtube channel https://www.youtube.com/channel/UCqCNsA ... p4cQF4j-8A
----------------------------------------------------------------------------------------------------------
My Soundcloud Page ....... Nektar Mappings
----------------------------------------------------------------------------------------------------------
It would have been nice with "One Note Stand" if it support multi CV note and gate out for a poly input.. however it is a nice little handy device but I would not use it for something like this.
-
- Information
-
Who is online
Users browsing this forum: SebAudio and 1 guest