Bassline Generator 1.1.0 Update
- arnigretar
- Posts: 466
- Joined: 15 May 2020
- Location: Iceland
- Contact:
GREAT update. Whoop whoop! Thanks looking forward to the stream as well <3
https://futuregrapher.bandcamp.com/
13, A Live 12, 80's Roland lover, Arturia V's, Korg Legacy, Soundtoys, Waves, Sonic Charge, Massive, Reaktor 6, FM8. + a lot of Hardware. Windows 7/10/11. Móatún 7 label owner
13, A Live 12, 80's Roland lover, Arturia V's, Korg Legacy, Soundtoys, Waves, Sonic Charge, Massive, Reaktor 6, FM8. + a lot of Hardware. Windows 7/10/11. Móatún 7 label owner
I havent read this whole thread, so my apologies if the subject already has been discussed and im late to the party.
But i updated my BG today and it doesnt appear in reason no more after launching. It says i need to be online otherwise certain RE’s cant be used.
In this case the BG.
I always create my tracks offline and never had this before. And there have been quite some updates in my rack the past years.
Can someone help me out?
Where am i going wrong?
But i updated my BG today and it doesnt appear in reason no more after launching. It says i need to be online otherwise certain RE’s cant be used.
In this case the BG.
I always create my tracks offline and never had this before. And there have been quite some updates in my rack the past years.
Can someone help me out?
Where am i going wrong?
All my tracks on my YouTube channel https://youtube.com/playlist?list=PLK0j ... P0EoiuUkNO
Has your system been deauthorized? I'd check that first.RTFX wrote: ↑08 Dec 2022I havent read this whole thread, so my apologies if the subject already has been discussed and im late to the party.
But i updated my BG today and it doesnt appear in reason no more after launching. It says i need to be online otherwise certain RE’s cant be used.
In this case the BG.
I always create my tracks offline and never had this before. And there have been quite some updates in my rack the past years.
Can someone help me out?
Where am i going wrong?
r11s
Do you own the RE or do you subscribe through Reason+?RTFX wrote: ↑08 Dec 2022I havent read this whole thread, so my apologies if the subject already has been discussed and im late to the party.
But i updated my BG today and it doesnt appear in reason no more after launching. It says i need to be online otherwise certain RE’s cant be used.
In this case the BG.
I always create my tracks offline and never had this before. And there have been quite some updates in my rack the past years.
Can someone help me out?
Where am i going wrong?
I own itjoeyluck wrote: ↑08 Dec 2022Do you own the RE or do you subscribe through Reason+?RTFX wrote: ↑08 Dec 2022I havent read this whole thread, so my apologies if the subject already has been discussed and im late to the party.
But i updated my BG today and it doesnt appear in reason no more after launching. It says i need to be online otherwise certain RE’s cant be used.
In this case the BG.
I always create my tracks offline and never had this before. And there have been quite some updates in my rack the past years.
Can someone help me out?
Where am i going wrong?
All my tracks on my YouTube channel https://youtube.com/playlist?list=PLK0j ... P0EoiuUkNO
You may just need to run Authorizer. You could try a sync all.
-
- Posts: 348
- Joined: 28 Jan 2021
Also, another great video by Ryan. Love his energy and creativity. And he used the Reason DAW throughout too, which wins extra special bonus points
Yeah. It’s a bug. Usually happens when beta licenses get updated to full licenses. Only way to fix it is to sync all. Sometimes a few times. It’s a total pain if you’ve got a load of REs in your account that you don’t want installed.
🗲 2ॐ ᛉ
I think another thing to try is to delete the RE and reinstall. Or try deleting the .cache files from the RackExtensions folder, which should prompt the license to update.
Thanks a lot you guys!
Sync all did the trick.
I am back in business!
Have a great weekend!
Sync all did the trick.
I am back in business!
Have a great weekend!
All my tracks on my YouTube channel https://youtube.com/playlist?list=PLK0j ... P0EoiuUkNO
Great update. Just wished that you could go lower than 16 steps. I know it has been talked about in the BLG live stream that the recorded bassline sequences might not be so much useful with fewer steps but still I´m doing more techno style stuff with odd steps 5, 7, 12, etc and BLG would be my goto device for basses. So why not add it?
We really wanted to do this, but unfortunately it wasn't possible due to problems with backwards compatibility.artotaku wrote: ↑10 Dec 2022Great update. Just wished that you could go lower than 16 steps. I know it has been talked about in the BLG live stream that the recorded bassline sequences might not be so much useful with fewer steps but still I´m doing more techno style stuff with odd steps 5, 7, 12, etc and BLG would be my goto device for basses. So why not add it?
Wouldn't a restart/reset trigger button (and corresponding CV input) be a solution to this issue without compromising backwards compatibility? I think that would be a nice addition. Then users could retrigger BLG to restart after 5, 7, 12 steps, etc. More work for the user, but at least it gives them the control. The only other way around this limitation is to bounce to track and edit in the sequencer. That would make an excellent 1.1.1 update.buddard wrote: ↑10 Dec 2022We really wanted to do this, but unfortunately it wasn't possible due to problems with backwards compatibility.artotaku wrote: ↑10 Dec 2022Great update. Just wished that you could go lower than 16 steps. I know it has been talked about in the BLG live stream that the recorded bassline sequences might not be so much useful with fewer steps but still I´m doing more techno style stuff with odd steps 5, 7, 12, etc and BLG would be my goto device for basses. So why not add it?
In terms of workarounds you can already trigger BLG to restart if you set it to Key mode. You can either create a clip in the main sequencer of any length you want, or insert a player like Sequences or Pattern Mutator before it and experiment with the length on those.challism wrote: ↑10 Dec 2022Wouldn't a restart/reset trigger button (and corresponding CV input) be a solution to this issue without compromising backwards compatibility? I think that would be a nice addition. Then users could retrigger BLG to restart after 5, 7, 12 steps, etc. More work for the user, but at least it gives them the control. The only other way around this limitation is to bounce to track and edit in the sequencer.
artotaku wrote: stuff about steps
Well, there you go. All you can really do is retrigger for fewer than 16 steps. That new shift feature could also come in very handy for variations. Or do 7-step techno producers dislike variations?
Thanks for the tip. That´ll do for now. In additon to this I´d like to mention since I want to transpose BLG with root note out of Chord Sequencer some more steps required:buddard wrote: ↑10 Dec 2022In terms of workarounds you can already trigger BLG to restart if you set it to Key mode. You can either create a clip in the main sequencer of any length you want, or insert a player like Sequences or Pattern Mutator before it and experiment with the length on those.challism wrote: ↑10 Dec 2022
Wouldn't a restart/reset trigger button (and corresponding CV input) be a solution to this issue without compromising backwards compatibility? I think that would be a nice addition. Then users could retrigger BLG to restart after 5, 7, 12 steps, etc. More work for the user, but at least it gives them the control. The only other way around this limitation is to bounce to track and edit in the sequencer.
- Connect CV out of Chord Sequencer root note to Transpose CV in of Sequences (glad it has that input!)
- set Sequences to Transpose by CV.
- set a note on C3 in Sequences with length e. g. 32 steps but use the Length Locator to control the step length. Why? Because you can control the step length by MIDI controller but not note length (at least not step wise)
This shows that CV inputs on devices that you´d never used come in handy at some point in time
Btw, the new feature in BLG to shift steps backwards now also makes it possible to use the Variators in the above setup scenario.
You can still connect Chord Sequencer CV out to directly to BLG CV in if you disable Pitch via MIDI from Sequences.artotaku wrote: ↑10 Dec 2022Thanks for the tip. That´ll do for now. In additon to this I´d like to mention since I want to transpose BLG with root note out of Chord Sequencer some more steps required:
- Connect CV out of Chord Sequencer root note to Transpose CV in of Sequences (glad it has that input!)
- set Sequences to Transpose by CV.
- set a note on C3 in Sequences with length e. g. 32 steps but use the Length Locator to control the step length. Why? Because you can control the step length by MIDI controller but not note length (at least not step wise)
This shows that CV inputs on devices that you´d never used come in handy at some point in time
Btw, the new feature in BLG to shift steps backwards now also makes it possible to use the Variators in the above setup scenario.
There's a subtle difference there since you are now able to transpose the bassline in sync with Chord Sequencer instead of having to wait for the next BLG cycle to start (which may or may not be what you want).
Any chance of
it would be really handy if after copying to another pattern slot that the manual override disappeared and you could use the options knobs again
Also it would definitely be appreciated if after an update that the trial timer got reset so we could assess if the changes suit our needs....
- Pitch bias knob for the variators?
- Negative values favour descending pitches
- Positive favours ascending pitches
(independent on / off beat)
it would be really handy if after copying to another pattern slot that the manual override disappeared and you could use the options knobs again
Also it would definitely be appreciated if after an update that the trial timer got reset so we could assess if the changes suit our needs....
- crimsonwarlock
- Posts: 2467
- Joined: 06 Nov 2021
- Location: ##########
+1
I trialed it before and decided that it wasn't for me. With the new additions, it does appeal more to me, but now I run the risk of buying it and finding out I still don't like what I get from it. We should be able to trial stuff after it gets major additional features. I seem to remember some third party dev having the trial reset on a product after a major update, so it looks to be possible.
-------
Reached the breaking-point. CrimsonWarlock has left the forum.
Reached the breaking-point. CrimsonWarlock has left the forum.
-
- Posts: 4119
- Joined: 20 Oct 2017
- Location: Norway
- Contact:
As a 6-step techno producer, I'm offended. Can't imagine how 2-step producers must be feeling right now. #cancelchallism
ah right, thanks.buddard wrote: ↑10 Dec 2022You can still connect Chord Sequencer CV out to directly to BLG CV in if you disable Pitch via MIDI from Sequences.artotaku wrote: ↑10 Dec 2022
Thanks for the tip. That´ll do for now. In additon to this I´d like to mention since I want to transpose BLG with root note out of Chord Sequencer some more steps required:
- Connect CV out of Chord Sequencer root note to Transpose CV in of Sequences (glad it has that input!)
- set Sequences to Transpose by CV.
- set a note on C3 in Sequences with length e. g. 32 steps but use the Length Locator to control the step length. Why? Because you can control the step length by MIDI controller but not note length (at least not step wise)
This shows that CV inputs on devices that you´d never used come in handy at some point in time
Btw, the new feature in BLG to shift steps backwards now also makes it possible to use the Variators in the above setup scenario.
There's a subtle difference there since you are now able to transpose the bassline in sync with Chord Sequencer instead of having to wait for the next BLG cycle to start (which may or may not be what you want).
- mimidancer
- Posts: 808
- Joined: 30 Sep 2021
you could just record the output and then cut the sequence to any length you desire. It is not rocket surgery.buddard wrote: ↑10 Dec 2022In terms of workarounds you can already trigger BLG to restart if you set it to Key mode. You can either create a clip in the main sequencer of any length you want, or insert a player like Sequences or Pattern Mutator before it and experiment with the length on those.challism wrote: ↑10 Dec 2022
Wouldn't a restart/reset trigger button (and corresponding CV input) be a solution to this issue without compromising backwards compatibility? I think that would be a nice addition. Then users could retrigger BLG to restart after 5, 7, 12 steps, etc. More work for the user, but at least it gives them the control. The only other way around this limitation is to bounce to track and edit in the sequencer.
-
- Information
-
Who is online
Users browsing this forum: dioxide and 28 guests