Do you get a lot of use out of the Reason players?

This forum is for discussing Rack Extensions. Devs are all welcome to show off their goods.
User avatar
gkillmaster
Posts: 285
Joined: 09 May 2018

29 Jan 2024

If so, which ones get the most use for you?

They all seem great. I have Bassline Generator and love it.

Thank you!

Greg

User avatar
FGL
Posts: 432
Joined: 23 Jan 2015

29 Jan 2024

I usually have “Sequences” above each instrument channel (or “Quadnote” or “Evolution”).

The advantage of sequences is that you can design the events very precisely with "play this note" only every 5th time etc.

Quadnote is very good for complex series of notes that you would never play yourself.

This also applies to evolution, where you only have one "row" but better rolls over note lengths.

And this is often varied with up to three “pearls”.

I then turn the resulting ones into Midi.
Last edited by FGL on 29 Jan 2024, edited 1 time in total.
Music:
My Songs on Youtube: https://www.youtube.com/@FGLucas-wj1eg.
My Songs on Soundcloud: https://soundcloud.com/frank-georg-lucas.

Chi-Individual
Posts: 459
Joined: 09 Apr 2020

29 Jan 2024

I use them all the time. Every song has players in it.
Every track
1. Chord Seq on ever song because I know $#!+ about theory but learning.
2. Drum Seq on every track just cause it’s easy

Intermediate use
3. mDSQ when I want to sequence one drum or percussion element and I want to save space in the rack.
4. Polystep Seq when I want to program a specific groove/feel since all individual notes can be shifted. I just wish each note had its own velocity control and bigger piano roll view options. I also like that it can be locked to a scale which helps me a lot
5. Dual arp for, well, dual arps lol
6. Quad Note Gen just to see what comes out. It’s great for happy accidents.

Rare use
7. Bass Line Generator but more for mid-high range arps than basses.
8. Beatmap not so often but I have started to experiment with using the X/Y controls to CV out to params on synths and FX. You can get some interesting results.

Note Echo and Scales and Chords get little to no use now.

User avatar
FGL
Posts: 432
Joined: 23 Jan 2015

29 Jan 2024

The trick with Beatmap for me is not to use it in the way that it suggests itself. That would be way too wild for me. I set the repeats to zero and roll 4 good seeds with a small spectrum of notes.

This also applies to Quad Note. Less is more. I get the best things when I set a range from 0 to 3..
Music:
My Songs on Youtube: https://www.youtube.com/@FGLucas-wj1eg.
My Songs on Soundcloud: https://soundcloud.com/frank-georg-lucas.

User avatar
FGL
Posts: 432
Joined: 23 Jan 2015

29 Jan 2024

Chi-Individual wrote:
29 Jan 2024
Note Echo and Scales and Chords get little to no use now.
Note Echo can't do much, but it can do a trick that I can't do any other way. Set a starting point for an event that is triggered by the first note. What does that mean I can build a combinator with two instruments where the second instrument starts a little later. So place two basses or two synths on top of each other with an adjustable starting point.
Music:
My Songs on Youtube: https://www.youtube.com/@FGLucas-wj1eg.
My Songs on Soundcloud: https://soundcloud.com/frank-georg-lucas.

Chi-Individual
Posts: 459
Joined: 09 Apr 2020

29 Jan 2024

FGL wrote:
29 Jan 2024

Note Echo can't do much, but it can do a trick that I can't do any other way. Set a starting point for an event that is triggered by the first note. What does that mean I can build a combinator with two instruments where the second instrument starts a little later. So place two basses or two synths on top of each other with an adjustable starting point.
If I’m understanding you correctly I believe you can do the same thing with this RE as well and have a bit more control over the delayed signal https://www.reasonstudios.com/shop/rack ... -repeater/
Please let me know if I’ve understood you if not could you post a screenshot of the set up you’ve mentioned :thumbup:

User avatar
FGL
Posts: 432
Joined: 23 Jan 2015

29 Jan 2024

Only Note Echo does that. With Note Echo you get a playable instrument where you can move the overlay. Not just a CV echo for one event. The "Signal Repeater" can only generate an echo for a CV signal.

Recipe: One combinator, two instruments, these are connected via a micromixer, which later makes it easier to fine-tune the volume. You then place a “Note Echo” in front of the second instrument. You can then move the starting point of this second instrument as an “echo”.

Setting Note Echo: No Transpose, Velocity 100, first green dot off, second green dot on, Step Length/auto sync off. "Step Length" controls the starting point of the second instrument.
Music:
My Songs on Youtube: https://www.youtube.com/@FGLucas-wj1eg.
My Songs on Soundcloud: https://soundcloud.com/frank-georg-lucas.

User avatar
DaveyG
Posts: 2599
Joined: 03 May 2020

29 Jan 2024

As for Beat Map, try feeding it into a synth. Happy accidents R us.

User avatar
dvdrtldg
Posts: 2460
Joined: 17 Jan 2015

29 Jan 2024

I use Bassline Generator, Pattern Mutator, Beatmap, Drum Sequencer, Inspiral and Evolution a lot as idea-sketching devices, usually start with them but then print to MIDI and continue working in the sequencer. Kompulsion for drums if I want more steps to work with. Inspiral is particularly good for happy accidents in a chosen key/mode, it's basically Scales & Chords on steroids and really useful

I use Chord Sequencer, ChordLine and Scale Matrix if I feel like experimenting with unusual chord structures, often with an arp player. Life Generative Sequencer in arp mode is a big favourite at the moment. Quad Note Generator is great for sequencing percussion, I use it a lot with Republik but find it a bit limited for synths & other melodic instruments

Sequences is probably my most-used player. "Utility" players that also get a fair bit of use are CV Player Tap, MIDI Compressor, MIDI-CV Converter, AutoLatch and Negate

Ones I never use: Note Echo, Dual Arp, Scales & Chords. I was very excited by Pearls when it first appeared, but I haven't really had a lot of success with it - haven't yet had that A-HA moment where you suddenly click with the software. There are a few players that I never use because I have other players that do their job better. Recently bought MeloDramatik because it was on crazy sale, but haven't yet figured out that one at all

Bes
Competition Winner
Posts: 1208
Joined: 22 Feb 2017

29 Jan 2024

hmm i suppose the combination of Chordseq and Phrase are my go to quickly "arpeggiate interestingly" before i flip the rack and start doing CV and sounds. composing could be Aggregate and Phrase? i guess it depends what i'm doing but mdsq is a solid all rounder and delta is what you make it
Last edited by Bes on 29 Jan 2024, edited 1 time in total.
- Certified Reason expert

madmacman
Posts: 815
Joined: 18 Jan 2015

29 Jan 2024

Much love for BeatMap here. It usually produces quite nice drum loops - at least more to my liking than the ready-to-use audio loops. But as stated before: use it for synths with percussion sounds. For example with the „Taiko Drums“ preset from Friktion. Instant Japanese drum performance! :thumbup:

User avatar
joeyluck
Moderator
Posts: 11283
Joined: 15 Jan 2015

29 Jan 2024

DaveyG wrote:
29 Jan 2024
As for Beat Map, try feeding it into a synth. Happy accidents R us.
Or into Mimic in slice mode!

User avatar
crimsonwarlock
Posts: 2467
Joined: 06 Nov 2021
Location: ##########

29 Jan 2024

I use all kinds of players across the composition and tracking stages. But my biggest current favorite is BeatMap because it is replacing a live drummer for me (I make symphonic/prog rock). I stack several BeatMap players and automate on/off for different parts of a song. I combine this with using LFOs to very slightly move the BeatMap location in both axes, to get constant small changes to the rhythm. I also automate the density dials on BeatMap to force breaks and such.

A tip for doing this: when you patch an LFO into the BeatMap X/Y cv-ins, the map always modulates around the center of the map. So I first find the base rhythm I want to use and write down the coordinates. Then I patch the LFO through the Janitor RE and use the offset option to re-align the BeatMap to the noted location. Subsequently, the LFO will modulate around that chosen location.

It is almost impossible to program manually anything that comes close to the results you can achieve this way :puf_bigsmile:
-------
Reached the breaking-point. CrimsonWarlock has left the forum.

User avatar
gkillmaster
Posts: 285
Joined: 09 May 2018

29 Jan 2024

This is fantastic information! Lot's to pour over. Thanks a lot everyone!

User avatar
hamsterfactor
Posts: 122
Joined: 22 Nov 2020

29 Jan 2024

+1 :thumbs_up:
gkillmaster wrote:
29 Jan 2024
This is fantastic information! Lot's to pour over. Thanks a lot everyone!
:reason: Suite 11  |  :reason: 12 perpetual license  |  :reason: 13 for testing  |  :re::refill: |  macOS Sonoma  |  Mac Studio M1 Max

User avatar
selig
RE Developer
Posts: 12109
Joined: 15 Jan 2015
Location: The NorthWoods, CT, USA

29 Jan 2024

joeyluck wrote:
29 Jan 2024
DaveyG wrote:
29 Jan 2024
As for Beat Map, try feeding it into a synth. Happy accidents R us.
Or into Mimic in slice mode!
I love beat map feeding Dr OctaRex, with two Pulsar LFOs controlling the X and Y position respectively. set the LFOs to tempo sync and different “odd” resolutions, reduce the length of the slices and filter out the lows to create percolating percussive backdrops that add movement to beats. Add a little LFO panning in Dr OctaRex, and maybe some phaser/flanger slow sweeping effects plus 3/16th panning delays and things can get very interesting even with the most generic loops as source material!
Selig Audio, LLC

User avatar
joeyluck
Moderator
Posts: 11283
Joined: 15 Jan 2015

29 Jan 2024

selig wrote:
29 Jan 2024
joeyluck wrote:
29 Jan 2024


Or into Mimic in slice mode!
I love beat map feeding Dr OctaRex, with two Pulsar LFOs controlling the X and Y position respectively. set the LFOs to tempo sync and different “odd” resolutions, reduce the length of the slices and filter out the lows to create percolating percussive backdrops that add movement to beats. Add a little LFO panning in Dr OctaRex, and maybe some phaser/flanger slow sweeping effects plus 3/16th panning delays and things can get very interesting even with the most generic loops as source material!
I'll have to try that. I like using players with Mimic with just random recorded sounds in slice mode to achieve something similar to XLN's Life plugin. And MImic works well for my workflow because I can just record directly into it.

User avatar
QVprod
Moderator
Posts: 3512
Joined: 15 Jan 2015
Contact:

29 Jan 2024

Note echo is really decent for hihat rolls, triplets… etc…

Basically note repeat. Not that it’s not in the name of the device…

WOO
Posts: 375
Joined: 07 Aug 2019

29 Jan 2024

selig wrote:
29 Jan 2024
joeyluck wrote:
29 Jan 2024


Or into Mimic in slice mode!
I love beat map feeding Dr OctaRex, with two Pulsar LFOs controlling the X and Y position respectively. set the LFOs to tempo sync and different “odd” resolutions, reduce the length of the slices and filter out the lows to create percolating percussive backdrops that add movement to beats. Add a little LFO panning in Dr OctaRex, and maybe some phaser/flanger slow sweeping effects plus 3/16th panning delays and things can get very interesting even with the most generic loops as source material!
Could you show in a screen shot how you set this up? Thanks

User avatar
huggermugger
Posts: 1465
Joined: 16 Jul 2021

29 Jan 2024

Yes, lots of use, but in Logic. Players are my number one use of the RRP.

User avatar
gkillmaster
Posts: 285
Joined: 09 May 2018

29 Jan 2024

selig wrote:
29 Jan 2024
joeyluck wrote:
29 Jan 2024


Or into Mimic in slice mode!
I love beat map feeding Dr OctaRex, with two Pulsar LFOs controlling the X and Y position respectively. set the LFOs to tempo sync and different “odd” resolutions, reduce the length of the slices and filter out the lows to create percolating percussive backdrops that add movement to beats. Add a little LFO panning in Dr OctaRex, and maybe some phaser/flanger slow sweeping effects plus 3/16th panning delays and things can get very interesting even with the most generic loops as source material!
Thanks! Going to try this tomorrow.

User avatar
mimidancer
Posts: 808
Joined: 30 Sep 2021

29 Jan 2024

My favorite player is Sequences. I wish it had a CV in that would change the step length. I also wish you could do 128 steps, but you can cheat that by automating the pattern change. All and all I wish all players had more CV IOs.

User avatar
selig
RE Developer
Posts: 12109
Joined: 15 Jan 2015
Location: The NorthWoods, CT, USA

29 Jan 2024

WOO wrote:
29 Jan 2024
selig wrote:
29 Jan 2024


I love beat map feeding Dr OctaRex, with two Pulsar LFOs controlling the X and Y position respectively. set the LFOs to tempo sync and different “odd” resolutions, reduce the length of the slices and filter out the lows to create percolating percussive backdrops that add movement to beats. Add a little LFO panning in Dr OctaRex, and maybe some phaser/flanger slow sweeping effects plus 3/16th panning delays and things can get very interesting even with the most generic loops as source material!
Could you show in a screen shot how you set this up? Thanks
This was a recent project, which played over a drum groove/solo for a friends film where we needed to support on screen "chaos". I used two complete chains, one panned left the other panned right to create the ever moving pattern, then did a live drum take on top of that.
I also used the LFO/Filter in Dr OctaRex to give further movement. The Pulsar settings were 5/4 and 7/4 (tempo synced), and the Dr OctaRex LFO was at 3/4 (all odd numbers to create a longer overall pattern length).
If you want visual feedback of the X/Y modulation, put BeatMap in a Combinator and route the LFO CVs to the Combinator and in the Programmer route them to the X and Y parameter – now you can watch the movement across the X/Y grid which if nothing else is entertaining IMO! ;)
Screen Shot 2024-01-29 at 8.42.27 PM.png
Screen Shot 2024-01-29 at 8.42.27 PM.png (778.63 KiB) Viewed 2128 times
Selig Audio, LLC

Steedus
Competition Winner
Posts: 1095
Joined: 31 Aug 2015
Location: Melbourne, AU

29 Jan 2024

AB Transpose by Tonic Mint gets used the most I'd say. It's a great, easy, free way to non-destructively try different octaves.

I also get a bit of use out of Scales & Chords when I need to stick to a specific tuning. I don't use it for chords that much but I wish it had a time-based offset for each note it creates - rather than all notes on at the same time, it could play them in sequence. I'm talking microseconds here, like how you'd play a loose chord on a piano.

User avatar
BRIGGS
Posts: 2149
Joined: 25 Sep 2015
Location: the reason rack

29 Jan 2024

Players are a musical mad scientist's playground.

Image
r11s

Post Reply
  • Information
  • Who is online

    Users browsing this forum: Trendiction [Bot] and 7 guests