Another Wonderfull Update from Mr Turn2Onz : ) ASVF-212 Analog State-Variable Filter ready to Go !
Hey Man ! You Rocks , again !
I'm only human, but I can feel that you are conscientious, open hearted, respectful, grateful, dedicated, willing, generous and....in short cause i can continu so far , you're HUMAN ..!
And for that and all the rest... Thank you... Of our generation, there aren't many left like that <3
I'm only human, but I can feel that you are conscientious, open hearted, respectful, grateful, dedicated, willing, generous and....in short cause i can continu so far , you're HUMAN ..!
And for that and all the rest... Thank you... Of our generation, there aren't many left like that <3
- crimsonwarlock
- Posts: 2328
- Joined: 06 Nov 2021
- Location: Close to the Edge
^ ^ ^ ^ ^
What he said
What he said
-------
Analog tape ⇒ ESQ1 sequencer board ⇒ Atari/Steinberg Pro24 ⇒ Atari/Cubase ⇒ Cakewalk Sonar ⇒ Orion Pro/Platinum ⇒ Reaper ⇒ Reason DAW.
Analog tape ⇒ ESQ1 sequencer board ⇒ Atari/Steinberg Pro24 ⇒ Atari/Cubase ⇒ Cakewalk Sonar ⇒ Orion Pro/Platinum ⇒ Reaper ⇒ Reason DAW.
+1 from me, it's a neat device
One thing tho is that I'm getting massive self-oscillation even with the self-oscillation switch turned to off.
been getting really great results from running the left channel through one iteration and the right channel through another and setting the lfo rates slightly differently, crazy 60s Hendrix phaser sounds.
One thing tho is that I'm getting massive self-oscillation even with the self-oscillation switch turned to off.
been getting really great results from running the left channel through one iteration and the right channel through another and setting the lfo rates slightly differently, crazy 60s Hendrix phaser sounds.
Hi to all!) Thank you for publishing update release info
ASVF-212 (v. 2.0) / Analog State-Variable Filter with Self-oscillation and Key Tracking.
https://www.reasonstudios.com/shop/rack ... le-filter/
UPDATE v. 2.0:
- New bigger panel (3U height) with new GUI design
- Self-Oscillation filter mode (set Filter Q = 100%, that run self-oscillation if option is on)
- Filter Keytracking. Activate Key Note frequency mode, and play by midi keys with self-oscillated signal
- Filter Smoothing
- Envelope Follower works with main signal inputs, plus new External ENV.FLW inputs
- Individual Envelope Follower Amount control (was been controllable by LFO Affect)
- Filter Drive. Works like an overdrive with compressor. Can be active only as part of active Limiter.
ASVF-212 (v. 2.0) / Analog State-Variable Filter with Self-oscillation and Key Tracking.
https://www.reasonstudios.com/shop/rack ... le-filter/
UPDATE v. 2.0:
- New bigger panel (3U height) with new GUI design
- Self-Oscillation filter mode (set Filter Q = 100%, that run self-oscillation if option is on)
- Filter Keytracking. Activate Key Note frequency mode, and play by midi keys with self-oscillated signal
- Filter Smoothing
- Envelope Follower works with main signal inputs, plus new External ENV.FLW inputs
- Individual Envelope Follower Amount control (was been controllable by LFO Affect)
- Filter Drive. Works like an overdrive with compressor. Can be active only as part of active Limiter.
Self-Oscillation mode and Filter KeyTracking is main features of this update.
New Self-Oscillaltion mode add possibilities to create infinity loop from the signal feedback to the current frequency (Note), which you can select in Freq NOTE Mode.
Also, in NOTE mode you can play with Self-oscillated signal by midi notes (display show current note you play, and shifted octave momentary) as Filter Key Tracking.
In the first version of ASVF-212, at high FilterQ values you can also listen short Self-Oscillation. It is not controllable, and not so big at length..
Why? Because this is typical for the State-Variable Filter type with multi-feedback architecture.
So, Update 2.0 add infinity looped self-oscillation at high FilterQ values.
thank you... very cool update !
https://soundcloud.com/moneykube-qube/s ... d-playlist
Proud Member Of The Awesome League Of Perpetuals
Proud Member Of The Awesome League Of Perpetuals
Ah! Got it it, thanks! I hadnt realised that you could use midi notes with it, thsts very cool. Maybe I should rtfm....turn2on wrote: ↑21 Jan 2023Self-Oscillation mode and Filter KeyTracking is main features of this update.
New Self-Oscillaltion mode add possibilities to create infinity loop from the signal feedback to the current frequency (Note), which you can select in Freq NOTE Mode.
Also, in NOTE mode you can play with Self-oscillated signal by midi notes (display show current note you play, and shifted octave momentary) as Filter Key Tracking.
In the first version of ASVF-212, at high FilterQ values you can also listen short Self-Oscillation. It is not controllable, and not so big at length..
Why? Because this is typical for the State-Variable Filter type with multi-feedback architecture.
So, Update 2.0 add infinity looped self-oscillation at high FilterQ values.
okay, my apologies, I'm possibly not seeing the obvious here. I've got it so it receives midi notes which temporarily changes the cut off frequency, so I can 'play' the self oscillation of the Q when it's turned up. it sounds great.
But there doesn't seem to be any way of recording the midi notes - ie, the little + sign in the sequencer isn't highlighted so I can't create a note lane the way you can with ECF-42. So am I missing something? Sorry to be an idiot.
But there doesn't seem to be any way of recording the midi notes - ie, the little + sign in the sequencer isn't highlighted so I can't create a note lane the way you can with ECF-42. So am I missing something? Sorry to be an idiot.
If nothing else works you could put it into a combinator and add a note lane for the combinator.
-
- Posts: 159
- Joined: 11 Aug 2021
Turn2on, and again I'm asking about Flanger DBL:)
Is it possible that you could add negative feedback to it?
Is it possible that you could add negative feedback to it?
Had you also enabled the "receive notes" entry for the ASVF in the combi programmer? As this is an FX this is off by default.
Hello.
Currently, device not receive midi notes to Filter Key Note.
At near update I try to add this. So device can start revive midi keys from sequencer.
Currently, Combinator solution is work.
- Create main signal device, set to play it with matrix sequence.
- Set ASVF-212 to Notes Freq mode.
- Set filter response to LP
- Set FilterQ to 100%
- Self-Osc = ON
- Set basic Note like a C4 or any other.
- Combine
- Set in Combinator ASVF-212: Source=Key, Target = Filter Note Key.
- Start to play keys and record Midi to Combinator track.
- Stop. You now have notes in Reason Sequencer, that control Note Key parameter of ASVF-212 by midi from sequencer and also midi keys.
Currently, ASVF-212 just cant receive midi, and Combinator can help.
I fix it at next update to have possibilities for recording and receiving notes from midi sequence at ASVF-212 track.
Currently, device not receive midi notes to Filter Key Note.
At near update I try to add this. So device can start revive midi keys from sequencer.
Currently, Combinator solution is work.
- Create main signal device, set to play it with matrix sequence.
- Set ASVF-212 to Notes Freq mode.
- Set filter response to LP
- Set FilterQ to 100%
- Self-Osc = ON
- Set basic Note like a C4 or any other.
- Combine
- Set in Combinator ASVF-212: Source=Key, Target = Filter Note Key.
- Start to play keys and record Midi to Combinator track.
- Stop. You now have notes in Reason Sequencer, that control Note Key parameter of ASVF-212 by midi from sequencer and also midi keys.
Currently, ASVF-212 just cant receive midi, and Combinator can help.
I fix it at next update to have possibilities for recording and receiving notes from midi sequence at ASVF-212 track.
Hello. I need some free time to make test and changes in Flanger. After current works I back to Flanger update. Please waiting, I remember and set flanger DBL questions to priority. Sorry that you need to waiting. I believe in few days I can back to it._andreypetr_ wrote: ↑21 Jan 2023Turn2on, and again I'm asking about Flanger DBL:)
Is it possible that you could add negative feedback to it?
-
- Posts: 159
- Joined: 11 Aug 2021
Yes, thank you! I mean it's already brilliant but missing this, so yes, it could be even betterturn2on wrote: ↑22 Jan 2023Hello. I need some free time to make test and changes in Flanger. After current works I back to Flanger update. Please waiting, I remember and set flanger DBL questions to priority. Sorry that you need to waiting. I believe in few days I can back to it._andreypetr_ wrote: ↑21 Jan 2023Turn2on, and again I'm asking about Flanger DBL:)
Is it possible that you could add negative feedback to it?
Oh sorry, I was not in front of the PC, so I could not try it out. But as t2on has written this seems to be an oversight which will be getting fixed soon. So again sorry for assuming things.
Excellent thank you! Really appreciate you getting back so quick.turn2on wrote: ↑22 Jan 2023Hello.
Currently, device not receive midi notes to Filter Key Note.
At near update I try to add this. So device can start revive midi keys from sequencer.
Currently, Combinator solution is work.
- Create main signal device, set to play it with matrix sequence.
- Set ASVF-212 to Notes Freq mode.
- Set filter response to LP
- Set FilterQ to 100%
- Self-Osc = ON
- Set basic Note like a C4 or any other.
- Combine
- Set in Combinator ASVF-212: Source=Key, Target = Filter Note Key.
- Start to play keys and record Midi to Combinator track.
- Stop. You now have notes in Reason Sequencer, that control Note Key parameter of ASVF-212 by midi from sequencer and also midi keys.
Currently, ASVF-212 just cant receive midi, and Combinator can help.
I fix it at next update to have possibilities for recording and receiving notes from midi sequence at ASVF-212 track.
Снимок экрана 2023-01-22 в 10.36.59.png
Ok. I already add possibilities to record notes key tracking in coming update.
How it working:
- active main signal, that activate Self-Oscillation when FilterQ=100%, SelfOsc=On.
- Filter Freq mode = Key Notes.
- create ASVF0212 device track to the sequencer
- create on the device track New Note Lane. Where now you can play/record midi notes
Update is coming soon as possible.
How it working:
- active main signal, that activate Self-Oscillation when FilterQ=100%, SelfOsc=On.
- Filter Freq mode = Key Notes.
- create ASVF0212 device track to the sequencer
- create on the device track New Note Lane. Where now you can play/record midi notes
Update is coming soon as possible.
wow wow wow... something great is going to be even better... thank you for your hard work.turn2on wrote: ↑22 Jan 2023Ok. I already add possibilities to record notes key tracking in coming update.
How it working:
- active main signal, that activate Self-Oscillation when FilterQ=100%, SelfOsc=On.
- Filter Freq mode = Key Notes.
- create ASVF0212 device track to the sequencer
- create on the device track New Note Lane. Where now you can play/record midi notes
Update is coming soon as possible.
https://soundcloud.com/moneykube-qube/s ... d-playlist
Proud Member Of The Awesome League Of Perpetuals
Proud Member Of The Awesome League Of Perpetuals
^^+1. Great!moneykube wrote: ↑22 Jan 2023wow wow wow... something great is going to be even better... thank you for your hard work.turn2on wrote: ↑22 Jan 2023Ok. I already add possibilities to record notes key tracking in coming update.
How it working:
- active main signal, that activate Self-Oscillation when FilterQ=100%, SelfOsc=On.
- Filter Freq mode = Key Notes.
- create ASVF0212 device track to the sequencer
- create on the device track New Note Lane. Where now you can play/record midi notes
Update is coming soon as possible.
MuRFA24 / Update 1.1.2:
Bugfix: Wrong Modulation Speed reslution in Hz mode.
Now work in range 0.01 … 100 Hz
https://www.reasonstudios.com/shop/rack ... -array-24/
Bugfix: Wrong Modulation Speed reslution in Hz mode.
Now work in range 0.01 … 100 Hz
https://www.reasonstudios.com/shop/rack ... -array-24/
- crimsonwarlock
- Posts: 2328
- Joined: 06 Nov 2021
- Location: Close to the Edge
Thanks for your continuing support.
-------
Analog tape ⇒ ESQ1 sequencer board ⇒ Atari/Steinberg Pro24 ⇒ Atari/Cubase ⇒ Cakewalk Sonar ⇒ Orion Pro/Platinum ⇒ Reaper ⇒ Reason DAW.
Analog tape ⇒ ESQ1 sequencer board ⇒ Atari/Steinberg Pro24 ⇒ Atari/Cubase ⇒ Cakewalk Sonar ⇒ Orion Pro/Platinum ⇒ Reaper ⇒ Reason DAW.
ASVF-212, UPDATE v. 2.0.1:
https://www.reasonstudios.com/shop/rack ... le-filter/
Filter keytrack & Self-Oscilltion now can be controllable by midi notes from the Reason sequencer (piano roll). ASVF-212 now accept incoming notes from the device sequencer track.
For Oscillator keytrack: Just create ASVF-212, set Notes frequency mode, select in context menu “New Note Lane” and create midi clip with sequence for self-oscillated signal.
For Filter keytrack: Just create ASVF-212, set Frequency mode, select in context menu “New Note Lane” and create midi clip with sequence for filter keytrack.
https://www.reasonstudios.com/shop/rack ... le-filter/
Filter keytrack & Self-Oscilltion now can be controllable by midi notes from the Reason sequencer (piano roll). ASVF-212 now accept incoming notes from the device sequencer track.
For Oscillator keytrack: Just create ASVF-212, set Notes frequency mode, select in context menu “New Note Lane” and create midi clip with sequence for self-oscillated signal.
For Filter keytrack: Just create ASVF-212, set Frequency mode, select in context menu “New Note Lane” and create midi clip with sequence for filter keytrack.
-
- Information
-
Who is online
Users browsing this forum: No registered users and 13 guests