New RE HLF-RE PASSIVE HIGH/LOW FILTER

This forum is for discussing Rack Extensions. Devs are all welcome to show off their goods.
Post Reply
Bes
Competition Winner
Posts: 1128
Joined: 22 Feb 2017

20 Sep 2022

Image
Image

https://www.reasonstudios.com/shop/rack ... ow-filter/
Red Rock Sound HLF-3C completes the Passive EQ Collection (rEQP-1A and reMEQ-5). This plug-in has 12 dB per octave low and high cut filters, providing broad retro-tonal sculpting or bygone-era special effects, without the inconvenience of insertion loss found with the unamplified passive hardware.

You can easily subtract the unnecessary frequencies in any instrument and sub-group so they stay wonderfully musical in the mix.

The original HLF-3C hardware unit is a true passive design; there are no input/output amplifiers and it does not require any external power. As a result, there is an inherent loss of signal level when using the HLF-3C hardware. The RRS HLF-3C plug-in compensates for this inherent signal loss for simplified use in the modern era; it has unity gain upon insertion (there is no insertion loss until one or both of the cut filters is engaged).

The HLF-3C interface is very simple and includes only three controls:

In — This toggle switch is the plug-in bypass control. When in the down position (bypassed), plug-in processing is disabled altogether. The plug-in is engaged with the switch is in the up position. This switch can be used to compare the processed settings to that of the original signal;

Low Cut — This rotary switch specifies the cutoff frequency of the low cut filter. Eleven frequencies are available: 50, 80, 100, 150, 250, 500, 750, 1000, 1500 and 2000 CPS;

High Cut — This rotary switch specifies the cutoff frequency of the high cut filter. Eleven frequencies are available: 1.5, 2, 3, 4, 5, 6, 8, 10, 12 and 15 KCS.
- Certified Reason expert

Bes
Competition Winner
Posts: 1128
Joined: 22 Feb 2017

20 Sep 2022

The cycle per second was a once-common English name for the unit of frequency now known as the hertz (Hz). The plural form was typically used, often written cycles per second, cycles/second, c.p.s., c/s, or, ambiguously, just cycles (Cy./Cyc.). The term comes from the fact that sound waves have a frequency measurable in their number of oscillations, or cycles, per second.

With the organization of the International System of Units in 1960, the cycle per second was officially replaced by the hertz, or reciprocal second, "s−1" or "1/s". Symbolically, "cycle per second" units are "cycle/second", while hertz is "Hz" or "s−1".[2] For higher frequencies, kilocycles (kc), as an abbreviation of kilocycles per second were often used on components or devices. Other higher units like megacycle (Mc) and less commonly kilomegacycle (kMc) were used before 1960[3] and in some later documents.[4] These have modern equivalents such as kilohertz (kHz), megahertz (MHz), and gigahertz (GHz). Following the introduction of the SI standard, use of these terms began to fall off in favor of the new unit, with hertz becoming the dominant convention in both academic and colloquial speech by the 1970s
- Certified Reason expert

Bes
Competition Winner
Posts: 1128
Joined: 22 Feb 2017

20 Sep 2022

:clap: happy 10th RE anniversary Red Rock! thanks for all the great tools :clap:
- Certified Reason expert

Mataya
Posts: 518
Joined: 03 May 2019

20 Sep 2022

Congratulations and thank you for this gift. Keep on.

M

User avatar
dvdrtldg
Posts: 2386
Joined: 17 Jan 2015

20 Sep 2022

Any particular use for this filter? i.e. does it do something that others don't, or deliver a special kind of sound in the right situation?

User avatar
challism
Moderator
Posts: 4642
Joined: 17 Jan 2015
Location: Fanboy Shill, Boomertown

20 Sep 2022

Thanks for the gift, Red Rock Sound. You are an amazing developer. Much love! <3

@Bes,I edited your post to include a link to the RE.

I'm a little saddened to see the device is set to "off" in the picture. This sends the wrong subliminal message.
But I'm delighted to see that the rack mount on the back perfectly matches ReasonTalk's dark mode color.
Capture.JPG
Capture.JPG (17.51 KiB) Viewed 2449 times
Players are to MIDI what synthesizers are to waveforms.

ReasonTalk Rules and Guidelines

User avatar
Loque
Moderator
Posts: 11170
Joined: 28 Dec 2015

20 Sep 2022

Thanks Red Rock Sound 👍🤗 and gratulations for your first 10 years 😀💪🤘
Reason12, Win10

User avatar
moneykube
Posts: 3447
Joined: 15 Jan 2015

20 Sep 2022

woohoo... thanks for the 10 years and this :re: :thumbs_up:
https://soundcloud.com/moneykube-qube/s ... d-playlist
Proud Member Of The Awesome League Of Perpetuals

247
Posts: 7
Joined: 16 Aug 2018

21 Sep 2022

Thank You Buddy ! And Thanks to your Bear President too ! Your Country Rocks ! Your Re's Too ! ; )

Wish you Good Vibes : )

User avatar
arnigretar
Posts: 453
Joined: 15 May 2020
Location: Iceland
Contact:

21 Sep 2022

Thanks! And congrats for the anniversary! 10 years :D great devices. A huge thank from me.
https://futuregrapher.bandcamp.com/

Reason 12, Ableton Live 10 Suite, Roland Cloud, Arturia V9, Korg Legacy 3, Soundtoys 5, Waves Mercury, Sonic Charge Bundle, N.I.: Massive, Reaktor 6, FM8. + a lot of Hardware. Windows 7/10.

User avatar
motuscott
Posts: 3420
Joined: 16 Jan 2015
Location: Contest Weiner

21 Sep 2022

Lurves me some RR. Unique plugs they make.
Ta and congrats!
Who’s using the royal plural now baby? 🧂

User avatar
moalla
Posts: 541
Joined: 20 Oct 2017
Location: DDR WEST

24 Sep 2022

[rackextension]https://www.reasonstudios.com/shop/rack ... ow-filter/[/rackextension]

Nice freebe in Tubetech blue, Red Rock says about this

" We are glad to present our anniversary plugin. For 10 years we have been delighting you with professional plugins at an affordable price. Thank you for support! "

" Red Rock Sound HLF-3C completes the Passive EQ Collection (rEQP-1A and reMEQ-5). This plug-in has 12 dB per octave low and high cut filters, providing broad retro-tonal sculpting or bygone-era special effects, without the inconvenience of insertion loss found with the unamplified passive hardware.

You can easily subtract the unnecessary frequencies in any instrument and sub-group so they stay wonderfully musical in the mix.

The original HLF-3C hardware unit is a true passive design; there are no input/output amplifiers and it does not require any external power. As a result, there is an inherent loss of signal level when using the HLF-3C hardware. The RRS HLF-3C plug-in compensates for this inherent signal loss for simplified use in the modern era; it has unity gain upon insertion (there is no insertion loss until one or both of the cut filters is engaged). "

Also Measure [rackextension]https://www.reasonstudios.com/shop/rack ... n/measure/[/rackextension] and other RackExtensions of them are now free
Last edited by moalla on 24 Sep 2022, edited 2 times in total.
https://soundcloud.com/user-594407128
Reason12.5, Yamaha EG112, Ibanez PF10, RhythmWolf, Miniak, Ipad+SparkLE
SE2200t :arrow: VAS micpre MOTO:better repair-mod well made stuff than buy the next crap

User avatar
miyaru
Posts: 624
Joined: 28 Oct 2019
Location: Zaanstad, The Netherlands

24 Sep 2022

Thanx! What a nice gesture!!!!
Greetings from Miyaru.
Prodaw i7-7700, 16Gb Ram, Focusrite Scarlett 18i20 3rd gen, ESI M4U eX, Reason12, Live Suit 10, Push2, Presonus Eris E8 and Monitor Station V2, Lexicon MPX1,
Korg N1, Yamaha RM1x :thumbup:

User avatar
Red Rock
Posts: 92
Joined: 02 Apr 2016

01 Nov 2022

Many thanks to everyone for the congratulations!
You are the best guys, keep creating, making the best music in the world.

Best regards,
Red Rock Sound Team

AnotherMathias
Posts: 213
Joined: 29 Sep 2020

01 Nov 2022

Yes, thanks for this!

I have a small bit-picking request: Any chance you can update the RE so the menu title is not in all caps? It looks so untidy among all the other REs in the menus.

Post Reply
  • Information
  • Who is online

    Users browsing this forum: No registered users and 10 guests