Free for standalone! Currently $99 for Pro / VST version.
VCV Rack 2 - released
- Faastwalker
- Posts: 2284
- Joined: 15 Jan 2015
- Location: NSW, Australia
https://vcvrack.com/news/2021-11-30-Rack-2-released
Free for standalone! Currently $99 for Pro / VST version.
Free for standalone! Currently $99 for Pro / VST version.
Right click > favorites
Tags.
After only 2 versions.
Tags.
After only 2 versions.
757365206C6F67696320746F207365656B20616E73776572732075736520726561736F6E20746F2066696E6420776973646F6D20676574206F7574206F6620796F757220636F6D666F7274207A6F6E65206F7220796F757220696E737069726174696F6E2077696C6C206372797374616C6C697A6520666F7265766572
I hope they add something like the Combi2. VCV can quickly become very complicated and it would be nice to hide parts of it. Shouldn't be too difficult since they have templates now.
Reason12, Win10
Yea, its a bit expensive. The VST is probably the most interesting part. If there would be a small free version, it could open up a lot of potential for Combi2 "devices".
On the other hand, they spent a lot of development time for this and it should pay off at some point. But still...99 bucks just to have the VST? Hum....i need to think about that for a while...
Reason12, Win10
These options arrived after only 2 versions, compared to our all time favorite DAW with those options still missing. VCV Rack is an amazing project, and I love everything about it
Sorry for the confusion
757365206C6F67696320746F207365656B20616E73776572732075736520726561736F6E20746F2066696E6420776973646F6D20676574206F7574206F6620796F757220636F6D666F7274207A6F6E65206F7220796F757220696E737069726174696F6E2077696C6C206372797374616C6C697A6520666F7265766572
- crimsonwarlock
- Posts: 2328
- Joined: 06 Nov 2021
- Location: Close to the Edge
If you don't mind NOT to have all the available modules (but still a whole lot) then you can get the free VeeSeeVST rack, which is a VST 2.4 compatible version of VCV rack version one.
https://github.com/bsp2/VeeSeeVSTRack
https://github.com/bsp2/VeeSeeVSTRack
-------
Analog tape ⇒ ESQ1 sequencer board ⇒ Atari/Steinberg Pro24 ⇒ Atari/Cubase ⇒ Cakewalk Sonar ⇒ Orion Pro/Platinum ⇒ Reaper ⇒ Reason DAW.
Analog tape ⇒ ESQ1 sequencer board ⇒ Atari/Steinberg Pro24 ⇒ Atari/Cubase ⇒ Cakewalk Sonar ⇒ Orion Pro/Platinum ⇒ Reaper ⇒ Reason DAW.
What you are actually getting for 99$ is nearly 30K worth compared to Eurorack hardware, to use inside a DAW - that is a nobrainer.Loque wrote: ↑01 Dec 2021Yea, its a bit expensive. The VST is probably the most interesting part. If there would be a small free version, it could open up a lot of potential for Combi2 "devices".
On the other hand, they spent a lot of development time for this and it should pay off at some point. But still...99 bucks just to have the VST? Hum....i need to think about that for a while...
Just the: Bogaudio , Impromptu, MindMeld, Countmodula, Geodesics, Audible Instruments, Nysthi, Vult Free, Submarine - module packs, will enable you to create for a life time. And these are free...
Then there are paid and free modules from well established brands, Befaco, Instruo, Erica. And more..!
Seriously , just get it!
Now all Reason Studios has to do, is get their act together, and get us full midi out for VST's , updating Reason 10 & 11 as well with this.
So i can marry Reason with VCV to full perfection!
Here are 2 patches i recently did, while testing the beta modules for certain developers.
Last edited by Eurikon on 04 Dec 2021, edited 1 time in total.
★ --------------------------------------- ★
♫ https://www.youtube.com/c/Eurikon ♫
♫ https://eurikon.bandcamp.com ♫
♫ https://instagram.com/eurikon_music ♫
★ --------------------------------------- ★
♫ https://www.youtube.com/c/Eurikon ♫
♫ https://eurikon.bandcamp.com ♫
♫ https://instagram.com/eurikon_music ♫
★ --------------------------------------- ★
- huggermugger
- Posts: 1307
- Joined: 16 Jul 2021
A massive Eurorack-based modular with hundreds of free modules and a VST option for $99, and you're complaining?Loque wrote: ↑01 Dec 2021
Yea, its a bit expensive. The VST is probably the most interesting part. If there would be a small free version, it could open up a lot of potential for Combi2 "devices".
On the other hand, they spent a lot of development time for this and it should pay off at some point. But still...99 bucks just to have the VST? Hum....i need to think about that for a while...
-
- Posts: 728
- Joined: 05 Sep 2017
Yeah that is absolutely nuts. 99 bucks for a true modular rack with hundreds of free modules? Just unbelievably powerful and cheap. Add 30 bucks for the VST host module and you can have VITAL in your modular rack for just 130 bucks!!!!huggermugger wrote: ↑01 Dec 2021A massive Eurorack-based modular with hundreds of free modules and a VST option for $99, and you're complaining?
- Stygian Abyss
- Posts: 110
- Joined: 17 Jun 2019
I just updated to version 2.0.1 and had a crash of the FX version of VCV Rack Pro when Reason scanned plugins (Windows 10, Reason 11). 2.0.0 worked correctly. Did someone else encounter this issue ?
Same thing here. Reinstalled vcv and seems to working now but I'm not happy about it.Stygian Abyss wrote: ↑04 Dec 2021I just updated to version 2.0.1 and had a crash of the FX version of VCV Rack Pro when Reason scanned plugins (Windows 10, Reason 11). 2.0.0 worked correctly. Did someone else encounter this issue ?
so two things:
a - uhh do not try to update VCV's plugins from within reason, i sure got two complete CTDs trying that silliness; event viewer suggests it's conked out nvidia's openGL driver???
b - is anyone else getting very weirdly low FPS within rack VST? hosted in reason, i'm only able to achieve 12-15 FPS, but in renoise i'm getting 30+, live 11 will run up to 72fps since i limited it in standalone, and actually running it standalone it'll refresh at the full 144hz if i let it... computer's not the NEWEST but it's no slouch, ryzen 7 2700x, 32gb DDR4 at 3200mhz, RTX 2070...
a - uhh do not try to update VCV's plugins from within reason, i sure got two complete CTDs trying that silliness; event viewer suggests it's conked out nvidia's openGL driver???
Code: Select all
Faulting application name: Reason.exe, version: 12.2.2.8259, time stamp: 0x61853237
Faulting module name: nvoglv64.dll, version: 30.0.14.7111, time stamp: 0x60d01070
Exception code: 0xc0000005
Fault offset: 0x000000000121b185
Faulting process id: 0x600
-
- Posts: 115
- Joined: 15 Aug 2016
I gave up on VCV Rack waiting for v2 and moved over to Cherry Audio's Voltage Modular almost two years ago. It has macro controls, BTW.
- huggermugger
- Posts: 1307
- Joined: 16 Jul 2021
Voltage Modular also has a more consistent UI, Patch Variations, and Cabinets,enossified wrote: ↑05 Dec 2021I gave up on VCV Rack waiting for v2 and moved over to Cherry Audio's Voltage Modular almost two years ago. It has macro controls, BTW.
Eurikon wrote: ↑01 Dec 2021What you are actually getting for 99$ is nearly 30K worth compared to Eurorack hardware, to use inside a DAW - that is a nobrainer.Loque wrote: ↑01 Dec 2021
Yea, its a bit expensive. The VST is probably the most interesting part. If there would be a small free version, it could open up a lot of potential for Combi2 "devices".
On the other hand, they spent a lot of development time for this and it should pay off at some point. But still...99 bucks just to have the VST? Hum....i need to think about that for a while...
Just the: Bogaudio , Impromptu, MindMeld, Countmodula, Geodesics, Audible Instruments, Nysthi, Vult Free, Submarine - module packs, will enable you to create for a life time. And these are free...
Then there are paid and free modules from well established brands, Befaco, Instruo, Erica. And more..!
Seriously , just get it!
Now all Reason Studios has to do, is get their act together, and get us full midi out for VST's , updating Reason 10 & 11 as well with this.
So i can marry Reason with VCV to full perfection!
Here are 2 patches i recently did, while testing the beta modules for certain developers.
I Just downloaded the Free version and installed bridge.
HOw does bridge works exactly?
Does it support Polyphony? Does it has a GUI?
I see you posted lots of videos of VCV and Reason, but can't figure it out.
I played a bit whilst on the VCV 1.1 versions and Reason 10 plus bridge, but
don't remember how was the actual bridge integration and IF CV-interoperation was seamless.
Could you help us understand what the paid version does for us Reasoners???
Sylent way is a paid module by Exper Sleeper am I wrong??
That is for clock syncronization so what does Bridge exactly other than audio??
It has been integrated in the Paid version and differs from 0.6.2c version??
Here you make use again of Exper sleepers paid VSt's and Ultralite Matrix...
Nice but is doesn't helps out understands the default features one could get
with the 99 bucks full package... and version is the old one also, not 2.0...
VCV forum Reason thread:
It is still possible to use an external midi re-routing to control VCV rack on
standalone.
I'm trying to know if it could be possible to integrate better the VST (paid) version with Reason
So we do not need to resort to external re-routing or audio-cv conversions
but have a straight Reason Midi-out module to VCV RT connection...
https://community.vcvrack.com/t/vcv-rac ... e/12375/10
It is still possible to use an external midi re-routing to control VCV rack on
standalone.
I'm trying to know if it could be possible to integrate better the VST (paid) version with Reason
So we do not need to resort to external re-routing or audio-cv conversions
but have a straight Reason Midi-out module to VCV RT connection...
https://community.vcvrack.com/t/vcv-rac ... e/12375/10
Hi Re8et, seems we are having a conversation across a universe of forum boards
As by now you got up to speed, with know abouts of VCV 2.
i might do some new videos in the coming weeks with tips on how to do stuff between Reason and VCV 2 standalone.
However i might be using the paid Expert Sleepers plugin suite and RME loopback function for that (virtual audio routing).
So then again it is not universally applicable
Some things to keep in mind:
As by now you got up to speed, with know abouts of VCV 2.
i might do some new videos in the coming weeks with tips on how to do stuff between Reason and VCV 2 standalone.
However i might be using the paid Expert Sleepers plugin suite and RME loopback function for that (virtual audio routing).
So then again it is not universally applicable
Some things to keep in mind:
- Neither of the methods above or what i just wrote above here should be compared to VCV Rack as a vst inside Reason.
That is a story on it's own (most of it is simple midi from Reason to VCV vst, i only use clock pulse input for rock solid sync).
Bridge is not supported in VCV 2, above methods with bridge used only apply for v1
Birdge has no UI, bridge is sort of like Reason Rewire, and can transport audio & CV.
But from v2 and up, bridge can be forgotten!
★ --------------------------------------- ★
♫ https://www.youtube.com/c/Eurikon ♫
♫ https://eurikon.bandcamp.com ♫
♫ https://instagram.com/eurikon_music ♫
★ --------------------------------------- ★
♫ https://www.youtube.com/c/Eurikon ♫
♫ https://eurikon.bandcamp.com ♫
♫ https://instagram.com/eurikon_music ♫
★ --------------------------------------- ★
-
- Information
-
Who is online
Users browsing this forum: killhamster and 10 guests