challism's Combi 2 patches

This forum is for sharing patches created with the updated Combinator, as well as backdrops and any backdrop assets.
Forum rules
This forum is for sharing patches created with the updated Combinator, as well as backdrops and any backdrop assets. If you would like to share a patch here as an attachment, you must zip it first. Otherwise you can host your patches elsewhere and share the links here.
User avatar
challism
Moderator
Posts: 4642
Joined: 17 Jan 2015
Location: Fanboy Shill, Boomertown

22 Oct 2021

eusti wrote:
22 Oct 2021
Nice!

Not sure what you think... I think this looks a little neater like this... Adjusted the "to shape" button and the labeling to the other low buttons on the other side...

Capture_edit_eu.jpg


D.
I agree that nudging it up looks better. Updating the file now. Thanks!
Attachments
Capture.JPG
Capture.JPG (77.07 KiB) Viewed 2768 times
Players are to MIDI what synthesizers are to waveforms.

ReasonTalk Rules and Guidelines

User avatar
eusti
Moderator
Posts: 2793
Joined: 15 Jan 2015

22 Oct 2021

Cool! Thank you!

D.

User avatar
challism
Moderator
Posts: 4642
Joined: 17 Jan 2015
Location: Fanboy Shill, Boomertown

22 Oct 2021

Updated the GUI a bit more with some minor tweaks. I think this looks much better. Updated the download link.
Capture.JPG
Capture.JPG (96.24 KiB) Viewed 2744 times
Players are to MIDI what synthesizers are to waveforms.

ReasonTalk Rules and Guidelines

Reminiscence
Posts: 257
Joined: 31 May 2016
Location: Earth
Contact:

23 Oct 2021

wow this looks so cool! :)

User avatar
Mmj85
Posts: 87
Joined: 28 Jan 2015

25 Oct 2021

😳.. this looks sick, the malstrom filters are something special to me. Thank you for this combi patch, I will have plenty of fun with this one :)

User avatar
challism
Moderator
Posts: 4642
Joined: 17 Jan 2015
Location: Fanboy Shill, Boomertown

25 Oct 2021

Just a heads up, I've updated the Combi patch to include two new features:
1) A "mono input" button. When engaged, it routes the left/right input signal into one channel (to Filter B).
2) Filter envelope to Mod Wheel button. When engaged, the envelope filter output is routed to the mod wheel (from back panel).
Download link has been updated.
Mal.JPG
Mal.JPG (60.7 KiB) Viewed 2541 times
Mmj85 wrote:
Reminiscence wrote:
eusti wrote:
cursors wrote:
Loque wrote:
Players are to MIDI what synthesizers are to waveforms.

ReasonTalk Rules and Guidelines

User avatar
nemesjs
Posts: 105
Joined: 07 May 2018

25 Oct 2021

Excellent work challism! :clap: I gather this has taken you many hours to do! Thank you! :thumbup:

User avatar
nemesjs
Posts: 105
Joined: 07 May 2018

25 Oct 2021

Now that I just bought Ivoks this comes in handy :) Thanks challism! Nice looking skin!

User avatar
challism
Moderator
Posts: 4642
Joined: 17 Jan 2015
Location: Fanboy Shill, Boomertown

01 Nov 2021

nemesjs wrote:
25 Oct 2021
Excellent work challism! :clap: I gather this has taken you many hours to do! Thank you! :thumbup:
Way more hours than I wanted, but yeah... I really enjoyed it, so it's all good!
Players are to MIDI what synthesizers are to waveforms.

ReasonTalk Rules and Guidelines

User avatar
challism
Moderator
Posts: 4642
Joined: 17 Jan 2015
Location: Fanboy Shill, Boomertown

01 Nov 2021

Using the new Pongasoft 12 Out/1In RE...
I built this Combi. It's a great way to A/B different devices, while containing all the devices in a really low profile, 1 unit tall Combi. Nothing fancy here, just a way to keep your rack tidy.
Pongasoft 12 OUT 1 IN.zip
(130.32 KiB) Downloaded 97 times
ponga.JPG
ponga.JPG (534.67 KiB) Viewed 2184 times
Players are to MIDI what synthesizers are to waveforms.

ReasonTalk Rules and Guidelines

User avatar
pongasoft
RE Developer
Posts: 478
Joined: 21 Apr 2016
Location: Las Vegas
Contact:

02 Nov 2021

challism wrote:
01 Nov 2021
Using the new Pongasoft 12 Out/1In RE...
I built this Combi. It's a great way to A/B different devices, while containing all the devices in a really low profile, 1 unit tall Combi. Nothing fancy here, just a way to keep your rack tidy.
Pongasoft 12 OUT 1 IN.zip
ponga.JPG
Thanks for sharing. If you need more original artwork, feel free to ask me.

You can also replace the Multi button by a knob for the 3 positions I think, unless you only need the 2 positions.

Yan

User avatar
arnigretar
Posts: 453
Joined: 15 May 2020
Location: Iceland
Contact:

03 Nov 2021

Great work! Thanks for sharing this :thumbup:
https://futuregrapher.bandcamp.com/

Reason 12, Ableton Live 10 Suite, Roland Cloud, Arturia V9, Korg Legacy 3, Soundtoys 5, Waves Mercury, Sonic Charge Bundle, N.I.: Massive, Reaktor 6, FM8. + a lot of Hardware. Windows 7/10.

User avatar
eusti
Moderator
Posts: 2793
Joined: 15 Jan 2015

03 Nov 2021

🙏🙏🙏

User avatar
challism
Moderator
Posts: 4642
Joined: 17 Jan 2015
Location: Fanboy Shill, Boomertown

12 Nov 2021

Edit: This is routing the FX in parallel instead of serial, as I originally wanted. While it's still a fun device to play around with, I wanted it to be serial, which is more complicated. I'm going to keep building this out and turn it into a serial re-routing unit.

Feel free to add knobs to control various functions of the effect units. Of course, the effect units can be replaced to anything you want, just drag and drop the replacement unit onto the unit it is replacing.

Since these aren't radio buttons, an interesting thing to experiment with is running the sound thru an effect unit twice (maybe 1st and 3rd).


Download here: https://1drv.ms/u/s!AiK22FHJlxLjkDFWqdX ... i?e=RecxZs
Capture1.JPG
Capture1.JPG (140.86 KiB) Viewed 2269 times
Players are to MIDI what synthesizers are to waveforms.

ReasonTalk Rules and Guidelines

User avatar
moofi
Posts: 1024
Joined: 19 Jan 2015
Location: hear

14 Nov 2021

Just turned it in to a stereo version ;-)

User avatar
challism
Moderator
Posts: 4642
Joined: 17 Jan 2015
Location: Fanboy Shill, Boomertown

29 Nov 2021

I've been working on this one for a while. It's set up so you can change the routing of the effects for fast results. This is a three way effect chain (FX A, FX B, FX C), so there are 6 possible routing options. Routing options are to the left. You have to disable (unclick) one before you enable the next... or you can set it to "multimode" and you can select more than one chain at a time.... beware of the feedback while doing this, though.

The way the device is set up, you can swap out the effects with any other effect of your choice (just drag and drop directly on top of the effect to replace it), and the routing and combinator assignments WON'T GET MESSED UP! Each effect has 3 knobs that can be programmed to control knobs on that effect (with room for more, if you want to add them), but these must be assigned (and will lose their assignments when you drop/drop replacement effects). The rest of the knobs/switches are assigned and won't be affected by dragging/dropping new effects into the combi.

This uses all free 3rd party REs and stock Reason devices.
Requires:
Reason 12
Pongasoft 12:1 A/B OUT Switch https://www.reasonstudios.com/shop/rack ... ut-switch/
Pongasoft A/B Audio & CV Switch https://www.reasonstudios.com/shop/rack ... cv-switch/
Kilohearts Limiter https://www.reasonstudios.com/shop/rack ... s-limiter/
GroovyMelon CMorfin XF Crossfader https://www.reasonstudios.com/shop/rack ... rossfader/
MagmaSonic Classic Filter https://www.reasonstudios.com/shop/rack ... ic-filter/
SKP Sound Design D1RT Line Noise Injector https://www.reasonstudios.com/shop/rack ... -injector/
Comes in Red and Grey.

Download Combi here: https://1drv.ms/u/s!AiK22FHJlxLjkDe18tm ... d?e=jSzfMu
.
SERIAL KILLER Red.JPG
SERIAL KILLER Red.JPG (51.36 KiB) Viewed 2398 times
SERIAL KILLER Grey.JPG
SERIAL KILLER Grey.JPG (42.91 KiB) Viewed 2398 times
Players are to MIDI what synthesizers are to waveforms.

ReasonTalk Rules and Guidelines

User avatar
deeplink
Competition Winner
Posts: 1073
Joined: 08 Jul 2020
Location: Dubai / Cape Town
Contact:

29 Nov 2021

This is awesome!

Another reason why Radio Buttons would be an awesome addition to the combinator2 widgets.
Get more Combinators at the deeplink website

User avatar
Despondo
Competition Winner
Posts: 1030
Joined: 15 Jan 2015
Location: Charlotte, NC
Contact:

01 Dec 2021

Great job on this one and thanks for sharing!

User avatar
challism
Moderator
Posts: 4642
Joined: 17 Jan 2015
Location: Fanboy Shill, Boomertown

06 Dec 2021

I finished the Serial Router.... available here: viewtopic.php?f=69&t=7525867
Players are to MIDI what synthesizers are to waveforms.

ReasonTalk Rules and Guidelines

User avatar
challism
Moderator
Posts: 4642
Joined: 17 Jan 2015
Location: Fanboy Shill, Boomertown

28 Dec 2021

I have this routing Combi wired between the Mastering Output and Hardware I/O of my default song template so I don't have to bother doing the routing every time I want to do internal sampling in Reason.
Internal Sampling (routing)-CM.zip
(343.95 KiB) Downloaded 82 times


The combi backdrop is a screenshot of the back of the rack wiring, so it's easy to remember how to wire this Combi.
.
Capture.JPG
Capture.JPG (101.2 KiB) Viewed 2146 times
Players are to MIDI what synthesizers are to waveforms.

ReasonTalk Rules and Guidelines

User avatar
challism
Moderator
Posts: 4642
Joined: 17 Jan 2015
Location: Fanboy Shill, Boomertown

09 Jan 2022

I'm loving Ravenherz DEG, I only wish it had a bypass switch or something for the audio signal. As it is now, I have to route my own audio & CV bypass switches... a small inconvenience, but it would be nice to have that built into the device. So I built this Combi that does the job... and more, you just have to connect the Front8 CV outs.
Requires free REs: DEG, DVC, Lolth, CVA-7, Front8, A/B Switch, A/B 12 Audio Out Switch.

A HUGE THANK YOU to all the Devs who gave us these wonderful devices for free! We love you!!
DEG - Connect Front8 Outs-CM.zip
(5.3 KiB) Downloaded 84 times
Capture.JPG
Capture.JPG (278.74 KiB) Viewed 2318 times
Players are to MIDI what synthesizers are to waveforms.

ReasonTalk Rules and Guidelines

User avatar
challism
Moderator
Posts: 4642
Joined: 17 Jan 2015
Location: Fanboy Shill, Boomertown

09 Jan 2022

Just connect Front8's first three CV inputs to your CV source and then connect Front8's 8 CV outputs to your destinations.
Use the Combi buttons to turn the connections on and off... have fun experimenting with CV!
1-to-8-CV-Switch-CM.zip
(3.01 KiB) Downloaded 89 times
Capture.JPG
Capture.JPG (147.12 KiB) Viewed 2368 times
Players are to MIDI what synthesizers are to waveforms.

ReasonTalk Rules and Guidelines

User avatar
challism
Moderator
Posts: 4642
Joined: 17 Jan 2015
Location: Fanboy Shill, Boomertown

19 Apr 2022

I figured I would consolidate my Combi patches into one thread
Players are to MIDI what synthesizers are to waveforms.

ReasonTalk Rules and Guidelines

User avatar
challism
Moderator
Posts: 4642
Joined: 17 Jan 2015
Location: Fanboy Shill, Boomertown

01 May 2022

Here's a combi for Retouch Control NoteRepeat. It uses 3 instances of RoboticBean Euclid (as External Pattern inputs), which are controllable from the combi face. NoteRepeat's note on trigger can be turned on (via ModWheel) or automated (via LFO).

Connect CVPT's output Gate/note to instrument.

Requires:
Retouch Control NoteRepeat (paid)
RoboticBean Euclid (paid)
TonicMint AB Tranpose (free)
Pongasoft AB Switch (free)
Lectric Panda CVTP (free)

Download:
NoteRepeat-Euclid-CM.zip
(59.72 KiB) Downloaded 61 times
.
NR.JPG
NR.JPG (48.28 KiB) Viewed 1826 times
.
NR2.JPG
NR2.JPG (125.91 KiB) Viewed 1881 times
Players are to MIDI what synthesizers are to waveforms.

ReasonTalk Rules and Guidelines

User avatar
challism
Moderator
Posts: 4642
Joined: 17 Jan 2015
Location: Fanboy Shill, Boomertown

17 May 2022

JPS.JPG
JPS.JPG (87.35 KiB) Viewed 1872 times
[attachment=1
JPS FX-CM.zip
(556.46 KiB) Downloaded 97 times
Players are to MIDI what synthesizers are to waveforms.

ReasonTalk Rules and Guidelines

Post Reply
  • Information
  • Who is online

    Users browsing this forum: No registered users and 3 guests