Behringer X-Touch mini Remote mapping
-
- Posts: 1285
- Joined: 15 Jan 2015
- Location: Faroe Islands
I got the X-Touch mini yesterday, so I decided to map it to use in Reason because the MCU in Reason is really bad and also would limit the way the Mini can work with Reason.
now more then 100 devices are mapped
have not started to mapp the instruments/synths I have yet
For now, you have to try it to see how it works and it will be logically mapped
Download the zip file and place the files in the right folder
on mac it's in Library/Application Support/Propellerhead Software/Remote/
There are 2 folders in there Codecs and Maps
In Codecs folder open Lua Codecs and place the Beringer folder from the downloaded zip in there
In Maps there is already a Behringer folder so place the "X-Touch Mini.remotemap" in that folder
now more then 100 devices are mapped
have not started to mapp the instruments/synths I have yet
For now, you have to try it to see how it works and it will be logically mapped
Download the zip file and place the files in the right folder
on mac it's in Library/Application Support/Propellerhead Software/Remote/
There are 2 folders in there Codecs and Maps
In Codecs folder open Lua Codecs and place the Beringer folder from the downloaded zip in there
In Maps there is already a Behringer folder so place the "X-Touch Mini.remotemap" in that folder
You do not have the required permissions to view the files attached to this post.
Last edited by gullum on 06 Nov 2019, edited 1 time in total.
-
- Posts: 1285
- Joined: 15 Jan 2015
- Location: Faroe Islands
List of devices that are mapped
Reason Devices and RE's
RE's mapped
Reason Devices and RE's
Code: Select all
Reason Studio Combinator
Reason Studio Acoustic Guitarist
Reason Studio Radical Piano
Reason Studio Polar
Reason Studio Scream 4 Distortion
Reason Studio Channel Dynamics
Reason Studio Channel EQ
Reason Studio Master Compressor
Reason Studio A List Studio Drummer
Reason Studio Audiomatic
Reason Studio RV7000 Advanced Reverb
Reason Studio MClass Equalizer
Reason Studio MClass Compressr
Reason Studio MClass Maximizer
Reason Studio MClass Stereo Imager
Reason Studio Pulsar
Reason Studio Line Mixer 6:2
Reason Studio RV-7 Digital Reverb
Reason Studio DDL-1 Digital Delay Line
Reason Studio D-11 Foldback Distortion
Reason Studio ECF-42 Envelope Controlled Filter
Reason Studio CF-101 Chorus/Flanger
Reason Studio PH-90 Phaser
Reason Studio UN-16 Unison
Reason Studio COMP-01 Compressor/Limiter
Reason Studio PEQ-2 Two Band Parametric EQ
Code: Select all
Kuassa EVE AT1
Kuassa EVE AT4
Kuassa EVE MP5
Kuassa Efektor Silencer
Kuassa Kratos 2 Maximizer
Kuassa Efektor CP3603
Kuassa Efektor CH3604
Kuassa Efektor DS3603
Kuassa Efektor FZ3603
Kuassa Efektor OD3603
Kuassa Delay Efektor DL3606
Kuassa Amplifikation Vermilion
Kuassa Amplifikation Creme
Kuassa Amplifikation Caliburn
Kuassa Amplifikation Matchlock
Kuassa Cerberus Bass Amp
kiloHearts 3BandEQ
kiloHearts Chorus
kiloHearts Delay
kiloHearts Gain
kiloHearts Limiter
kiloHearts Reverser
kiloHearts Stereo
kiloHearts TransientShaper
Synapse Audio Software Chorus
Synapse Audio Software Filter
Synapse Audio Software Phaser
Synapse Audio Software Reverb
Synapse Audio Software Ring Modulation
Synapse Audio Software Vintage EQ
Synapse Audio GQ7
Synapse Audio Ninety
Softube TubeTechCC
Softube Reason Bass Amp
Softube Reason Amp
Softube FET Compressor
Softube Dynamite(Valley People
Softube Tridemt A-Range EQ
Softube Saturation Knob
Flower Audio Loudness Meter
Selig Audi Leveler
Selig Audio Gain
Selig Audio DeEsser
Quadelectra StereoSplitter
Ochen K Carve EQ Ducker
iZotope Inc Ozone Maximizer
pongasoft ABSwitch
Unfiltered Audio G8 Dynamic Gate
Unfiltered Audio Yoko Band-Spliter
ThatMusicCompany T2 Phaser
ThatMusicCompany Distort Chain
ThatMusicCompany Mr Over Drive
MSDSP Moo Tube Compresso
McDSP Moo Q Equalizer
McDSP C670 Compressor
McDSP E670 Equalizer
McDSP FRG-EEE Equalizer
McDSP FRG-4RE Compressor
Bassment DSP SA16 Chorus
DLD Technology Revolution
Devoloop DYNARAGE
Rob Papen RPSpec
Cakewalk RE2A
fxpansion DCAM Envolute Shaper
Reasonistas CORE
fxpansion DCAM Bus COmpresser
LAB ONE Buttonings ReQ 131
Audiorealism Abl2
Audiorealism ReDominator
IOx Audioware Titan 410x Precision Maximizer
IOx Audioware Onyx Onyx 430i Tube Limiter
Red Rock Sound Multi Band Compressor
Red Rock Sound Multi Band Limiter
Red Rock Sound C1-Alpha
Red Rock Sound C1L1
Red Rock Sound C1-Sigma
Red Rock Sound Re 60 Spectrum Analyzer
Red Rock Sound Re 202
Red Rock Sound Re 200
Red Rock Sound Re 302
Red Rock Sound. Orchesteral Hall Reverb
-
- Posts: 1285
- Joined: 15 Jan 2015
- Location: Faroe Islands
To simplify the mapping I have named the buttons and rotary
Encoders are called Rotary 1-8
Encoders Push are called Rotary Buttons 1-8
top row buttons are just called Button 1-8
second row of buttons are from left to right.
Left Button, Right Button, Rewind Button, Fast Fwd Button, Stop Button, Play Button & Record Button
Master Fader is Master Fader Layer A is Frm Left Button Layer B is Frm Right Button
a little video demo
Encoders are called Rotary 1-8
Encoders Push are called Rotary Buttons 1-8
top row buttons are just called Button 1-8
second row of buttons are from left to right.
Left Button, Right Button, Rewind Button, Fast Fwd Button, Stop Button, Play Button & Record Button
Master Fader is Master Fader Layer A is Frm Left Button Layer B is Frm Right Button
a little video demo
Last edited by gullum on 06 Nov 2019, edited 1 time in total.
-
- Posts: 237
- Joined: 19 Jul 2015
Thank you for sharing the remote-files.
Could you tell me, if the X-touch-mini Encoder-LEDs are always respond to values in Reason, so that they are always in sync ? In short, are the LEDs respond feedback from Reason if you change a value with the Mouse in Reason ?
Could you tell me, if the X-touch-mini Encoder-LEDs are always respond to values in Reason, so that they are always in sync ? In short, are the LEDs respond feedback from Reason if you change a value with the Mouse in Reason ?
-
- Posts: 1285
- Joined: 15 Jan 2015
- Location: Faroe Islands
yes they are responsive and update fast
I have mapped them to show in different ways, normal risings like volume or single dot increase( Spread) from center out or bipolar
maybe I should just make a video to show it a little how it works
-
- Posts: 1249
- Joined: 27 Sep 2019
Are you able to control most of the important parameters of devices ? Like oscillator filters envelopes etc?
I'm thinking of buying the xtouch mini. If you've already mapped a lot of stuff,maybe other mini users like me can edit the maps and add more devices.
I'm thinking of buying the xtouch mini. If you've already mapped a lot of stuff,maybe other mini users like me can edit the maps and add more devices.
-
- Posts: 1249
- Joined: 27 Sep 2019
By layers, do you mean Reasons controller groups?gullum wrote: ↑06 Nov 2019I got the X-Touch mini yesterday, so I decided to map it to use in Reason because the MCU in Reason is really bad and also would limit the way the Mini can work with Reason.
now more then 100 devices are mapped
have not started to mapp the instruments/synths I have yet
For now, you have to try it to see how it works and it will be logically mapped
behring x mini.png
Download the zip file and place the files in the right folder
on mac it's in Library/Application Support/Propellerhead Software/Remote/
There are 2 folders in there Codecs and Maps
In Codecs folder open Lua Codecs and place the Beringer folder from the downloaded zip in there
In Maps there is already a Behringer folder so place the "X-Touch Mini.remotemap" in that folder
Remote.zip
-
- Posts: 1285
- Joined: 15 Jan 2015
- Location: Faroe Islands
by layers I mean the endoders and buttons have several functions depending on what layer you are in
-
- Posts: 1285
- Joined: 15 Jan 2015
- Location: Faroe Islands
I have mostly mapped effect devices yet
-
- Posts: 1249
- Joined: 27 Sep 2019
Thanks for giving your remote maps here
If i do buy it, ill try to contribute the the maps
-
- Posts: 13
- Joined: 19 Jun 2019
Very nice job!
I'm considering making remote mapping for the Behringer Motör, but (so far) have zero experiences with this.
Where did you start the process?
Thanks in advance,
Peter
I'm considering making remote mapping for the Behringer Motör, but (so far) have zero experiences with this.
Where did you start the process?
Thanks in advance,
Peter
-
- Posts: 1285
- Joined: 15 Jan 2015
- Location: Faroe Islands
I have had Icon Qcon pro and EX for a few years now, so I have been doing this for some time now.
if you download the files for mini they should work with motor too but you only get the encoders to work
you can open the remotemap file in a text editor and study them there, it is no magic and as soon as you get a hang of it it becomes very easy to map
these files have faders added for when attached to SSL mixer
if you download the files for mini they should work with motor too but you only get the encoders to work
you can open the remotemap file in a text editor and study them there, it is no magic and as soon as you get a hang of it it becomes very easy to map
these files have faders added for when attached to SSL mixer
You do not have the required permissions to view the files attached to this post.
-
- Posts: 27
- Joined: 14 Jan 2021
Hey,
I bought a X-Touch Mini and I copied the files like described above in the post to the folders. In reason, I choose Behringer and X Touch Mini. Very easy...but unfortunately neither the transport nor the synth/effects react in a way. Nothing works. The LED Lights are moving, but no fader or parameter and it even does not move, when I try manually remote mapping.
Do I have to install some other stuff at at first or do I have to change some intern X-Touch Mini parameters to get it to work in Reason 11?
I bought a X-Touch Mini and I copied the files like described above in the post to the folders. In reason, I choose Behringer and X Touch Mini. Very easy...but unfortunately neither the transport nor the synth/effects react in a way. Nothing works. The LED Lights are moving, but no fader or parameter and it even does not move, when I try manually remote mapping.
Do I have to install some other stuff at at first or do I have to change some intern X-Touch Mini parameters to get it to work in Reason 11?
-
- Posts: 21
- Joined: 21 Apr 2020
Hello, this is my first post.
I have an X-Touch Mini and would like to use gullum's remote map for it (by the way thank you for sharing). But I guess I need a suitable template for the X-Touch, otherwise the lua code won't work. Is it possible to share this template too? Or is there anything I am missing?
Thanks
I have an X-Touch Mini and would like to use gullum's remote map for it (by the way thank you for sharing). But I guess I need a suitable template for the X-Touch, otherwise the lua code won't work. Is it possible to share this template too? Or is there anything I am missing?
Thanks
-
- Posts: 849
- Joined: 18 Aug 2018
Does this work on an X-Touch Compact?
This is a block of text that can be added to posts you make. There is a 255 character limit.
-
- Posts: 21
- Joined: 21 Apr 2020
I cannot say, as I just have an X-Touch mini. To some extent I got it working. It appears I have to use the Mackie Mode of the X-Touch which I had not yet try. So there is no template needed as it is "built in" in the device. It has just to be enabled.
But the remotemap does not work, i.e. I can assign the buttons and rotaries to Reason controls, it works for example with a Combinator and other RE but the mixer does not work.
Just to say that it was said right at the beginning of this post the zip file to download suits an X-Touch mini. But perhaps this just works on Mac, I am on Windows.
Anyway I shall experiment a bit more, but if I am not successful soon I shall end my endevour.
But the remotemap does not work, i.e. I can assign the buttons and rotaries to Reason controls, it works for example with a Combinator and other RE but the mixer does not work.
Just to say that it was said right at the beginning of this post the zip file to download suits an X-Touch mini. But perhaps this just works on Mac, I am on Windows.
Anyway I shall experiment a bit more, but if I am not successful soon I shall end my endevour.
-
- Posts: 1285
- Joined: 15 Jan 2015
- Location: Faroe Islands
for the x-touch mini it should work just fine on windows too just need to put it in right folders.
Although I think you need to restart reason after you placed the files in the right place for it to work
Although I think you need to restart reason after you placed the files in the right place for it to work
-
- Posts: 1285
- Joined: 15 Jan 2015
- Location: Faroe Islands
it will work but there will be several not mapped faders and some buttons
-
- Competition Winner
- Posts: 216
- Joined: 31 Oct 2021
-
- Posts: 849
- Joined: 18 Aug 2018
Nice, thanks!
This is a block of text that can be added to posts you make. There is a 255 character limit.
-
- Posts: 21
- Joined: 21 Apr 2020
After I revisited my issue from November 2021 I finally understood how this remotemap works. I post this to help others if they want to use/understand this remote script too.
I have an X-TOUCH mini. All the remote files have of course to be properly placed on the computer.
One finding is the .lua script file contains excess defined items (I guess for other Behringer X-TOUCH hardware devices) and switches the X-TOUCH into "MC" mode.
I just wanted to use the controller for the mixer and had troubles as the most of the defined remote items did not work.
The "discovery":
The remotemap file contains a section/Scope for "Reason Master Section" and the entries for "Previous/Next Remote Base Channel" JUST WORK if the controller is "assigned" to the Master Section. This worked but then the section/Scope for "Reason Main Mixer Channel" DOES NOT WORK. The Scope is just active on a single "Channel Strip" and ONLY if the controller is assigned to the associated channel (again a right mouse click and assign). But then the binding to the "Master Section" is lost. I understanding was when the controller is bound to the "Master Section" then the mixer channels are bound too. WRONG.
Now after this findings I guess I have to write a full "Master Section" scope as I do not know how to switch the controller to the appropriate channel without binding it with the mouse when the "Remote Base Channel" is switched. Either lack of knowledge or it is impossible....
I have an X-TOUCH mini. All the remote files have of course to be properly placed on the computer.
One finding is the .lua script file contains excess defined items (I guess for other Behringer X-TOUCH hardware devices) and switches the X-TOUCH into "MC" mode.
I just wanted to use the controller for the mixer and had troubles as the most of the defined remote items did not work.
The "discovery":
The remotemap file contains a section/Scope for "Reason Master Section" and the entries for "Previous/Next Remote Base Channel" JUST WORK if the controller is "assigned" to the Master Section. This worked but then the section/Scope for "Reason Main Mixer Channel" DOES NOT WORK. The Scope is just active on a single "Channel Strip" and ONLY if the controller is assigned to the associated channel (again a right mouse click and assign). But then the binding to the "Master Section" is lost. I understanding was when the controller is bound to the "Master Section" then the mixer channels are bound too. WRONG.
Now after this findings I guess I have to write a full "Master Section" scope as I do not know how to switch the controller to the appropriate channel without binding it with the mouse when the "Remote Base Channel" is switched. Either lack of knowledge or it is impossible....
-
- Posts: 3
- Joined: 16 Apr 2022
hi, i have read through most of the questions and answers here and have tried few suggestions. but i have a x touch one and the firmware version is 1.10 but if i downgrade it to version 1.04 the device does not get recognised on my PC (windows 10).sadly the lua and maps from Jaexx does not work. i have followed every instructions on the zip file that was there. i need help. please help me.
all i want to do is use the X Touch one to control the faders and pan without having to guess where the encoders is gone to. it will work on pan and then move to channel 2 it starts working on LPF. please help.
firmware upgrade and downgrade is not an option as the device does not work on any other versions only on the latest firmware.
all i want to do is use the X Touch one to control the faders and pan without having to guess where the encoders is gone to. it will work on pan and then move to channel 2 it starts working on LPF. please help.
firmware upgrade and downgrade is not an option as the device does not work on any other versions only on the latest firmware.
-
- Posts: 3
- Joined: 16 Apr 2022
once again i can see this forum is no help.. its not just this topic. many other topics months ago people read and help others but not me.. i just deleted all my post and just going to write this and move along.. what a crappy forum
-
- Posts: 1285
- Joined: 15 Jan 2015
- Location: Faroe Islands
I'm sorry to say that if you are not getting it to work with Jaexx mapping then you are doing something wrong.
Not getting an answer in 2 day for a controller not many people have in a thread that is about an other controller, then call it a crappy forum is not the way to get help.
-
- Information
-
Who is online
Users browsing this forum: No registered users and 12 guests