I agree that nudging it up looks better. Updating the file now. Thanks!
challism's Combi 2 patches
Forum rules
This forum is for sharing patches created with the updated Combinator, as well as backdrops and any backdrop assets. If you would like to share a patch here as an attachment, you must zip it first. Otherwise you can host your patches elsewhere and share the links here.
This forum is for sharing patches created with the updated Combinator, as well as backdrops and any backdrop assets. If you would like to share a patch here as an attachment, you must zip it first. Otherwise you can host your patches elsewhere and share the links here.
- Attachments
-
- Capture.JPG (77.07 KiB) Viewed 2837 times
Updated the GUI a bit more with some minor tweaks. I think this looks much better. Updated the download link.
-
- Posts: 258
- Joined: 31 May 2016
- Location: Earth
- Contact:
wow this looks so cool!
Just a heads up, I've updated the Combi patch to include two new features:
1) A "mono input" button. When engaged, it routes the left/right input signal into one channel (to Filter B).
2) Filter envelope to Mod Wheel button. When engaged, the envelope filter output is routed to the mod wheel (from back panel).
Download link has been updated.
1) A "mono input" button. When engaged, it routes the left/right input signal into one channel (to Filter B).
2) Filter envelope to Mod Wheel button. When engaged, the envelope filter output is routed to the mod wheel (from back panel).
Download link has been updated.
Mmj85 wrote:
Reminiscence wrote:
eusti wrote:
cursors wrote:
Loque wrote:
Way more hours than I wanted, but yeah... I really enjoyed it, so it's all good!
Using the new Pongasoft 12 Out/1In RE...
I built this Combi. It's a great way to A/B different devices, while containing all the devices in a really low profile, 1 unit tall Combi. Nothing fancy here, just a way to keep your rack tidy.
I built this Combi. It's a great way to A/B different devices, while containing all the devices in a really low profile, 1 unit tall Combi. Nothing fancy here, just a way to keep your rack tidy.
Thanks for sharing. If you need more original artwork, feel free to ask me.challism wrote: ↑01 Nov 2021Using the new Pongasoft 12 Out/1In RE...
I built this Combi. It's a great way to A/B different devices, while containing all the devices in a really low profile, 1 unit tall Combi. Nothing fancy here, just a way to keep your rack tidy.
Pongasoft 12 OUT 1 IN.zip
ponga.JPG
You can also replace the Multi button by a knob for the 3 positions I think, unless you only need the 2 positions.
Yan
- arnigretar
- Posts: 453
- Joined: 15 May 2020
- Location: Iceland
- Contact:
Great work! Thanks for sharing this
https://futuregrapher.bandcamp.com/
Reason 12, Ableton Live 10 Suite, Roland Cloud, Arturia V9, Korg Legacy 3, Soundtoys 5, Waves Mercury, Sonic Charge Bundle, N.I.: Massive, Reaktor 6, FM8. + a lot of Hardware. Windows 7/10.
Reason 12, Ableton Live 10 Suite, Roland Cloud, Arturia V9, Korg Legacy 3, Soundtoys 5, Waves Mercury, Sonic Charge Bundle, N.I.: Massive, Reaktor 6, FM8. + a lot of Hardware. Windows 7/10.
Edit: This is routing the FX in parallel instead of serial, as I originally wanted. While it's still a fun device to play around with, I wanted it to be serial, which is more complicated. I'm going to keep building this out and turn it into a serial re-routing unit.
Feel free to add knobs to control various functions of the effect units. Of course, the effect units can be replaced to anything you want, just drag and drop the replacement unit onto the unit it is replacing.
Since these aren't radio buttons, an interesting thing to experiment with is running the sound thru an effect unit twice (maybe 1st and 3rd).
Download here: https://1drv.ms/u/s!AiK22FHJlxLjkDFWqdX ... i?e=RecxZs
Feel free to add knobs to control various functions of the effect units. Of course, the effect units can be replaced to anything you want, just drag and drop the replacement unit onto the unit it is replacing.
Since these aren't radio buttons, an interesting thing to experiment with is running the sound thru an effect unit twice (maybe 1st and 3rd).
Download here: https://1drv.ms/u/s!AiK22FHJlxLjkDFWqdX ... i?e=RecxZs
I've been working on this one for a while. It's set up so you can change the routing of the effects for fast results. This is a three way effect chain (FX A, FX B, FX C), so there are 6 possible routing options. Routing options are to the left. You have to disable (unclick) one before you enable the next... or you can set it to "multimode" and you can select more than one chain at a time.... beware of the feedback while doing this, though.
The way the device is set up, you can swap out the effects with any other effect of your choice (just drag and drop directly on top of the effect to replace it), and the routing and combinator assignments WON'T GET MESSED UP! Each effect has 3 knobs that can be programmed to control knobs on that effect (with room for more, if you want to add them), but these must be assigned (and will lose their assignments when you drop/drop replacement effects). The rest of the knobs/switches are assigned and won't be affected by dragging/dropping new effects into the combi.
This uses all free 3rd party REs and stock Reason devices.
Requires:
Reason 12
Pongasoft 12:1 A/B OUT Switch https://www.reasonstudios.com/shop/rack ... ut-switch/
Pongasoft A/B Audio & CV Switch https://www.reasonstudios.com/shop/rack ... cv-switch/
Kilohearts Limiter https://www.reasonstudios.com/shop/rack ... s-limiter/
GroovyMelon CMorfin XF Crossfader https://www.reasonstudios.com/shop/rack ... rossfader/
MagmaSonic Classic Filter https://www.reasonstudios.com/shop/rack ... ic-filter/
SKP Sound Design D1RT Line Noise Injector https://www.reasonstudios.com/shop/rack ... -injector/
Comes in Red and Grey.
Download Combi here: https://1drv.ms/u/s!AiK22FHJlxLjkDe18tm ... d?e=jSzfMu
.
The way the device is set up, you can swap out the effects with any other effect of your choice (just drag and drop directly on top of the effect to replace it), and the routing and combinator assignments WON'T GET MESSED UP! Each effect has 3 knobs that can be programmed to control knobs on that effect (with room for more, if you want to add them), but these must be assigned (and will lose their assignments when you drop/drop replacement effects). The rest of the knobs/switches are assigned and won't be affected by dragging/dropping new effects into the combi.
This uses all free 3rd party REs and stock Reason devices.
Requires:
Reason 12
Pongasoft 12:1 A/B OUT Switch https://www.reasonstudios.com/shop/rack ... ut-switch/
Pongasoft A/B Audio & CV Switch https://www.reasonstudios.com/shop/rack ... cv-switch/
Kilohearts Limiter https://www.reasonstudios.com/shop/rack ... s-limiter/
GroovyMelon CMorfin XF Crossfader https://www.reasonstudios.com/shop/rack ... rossfader/
MagmaSonic Classic Filter https://www.reasonstudios.com/shop/rack ... ic-filter/
SKP Sound Design D1RT Line Noise Injector https://www.reasonstudios.com/shop/rack ... -injector/
Comes in Red and Grey.
Download Combi here: https://1drv.ms/u/s!AiK22FHJlxLjkDe18tm ... d?e=jSzfMu
.
This is awesome!
Another reason why Radio Buttons would be an awesome addition to the combinator2 widgets.
Another reason why Radio Buttons would be an awesome addition to the combinator2 widgets.
Get more Combinators at the deeplink website
Great job on this one and thanks for sharing!
I finished the Serial Router.... available here: viewtopic.php?f=69&t=7525867
I have this routing Combi wired between the Mastering Output and Hardware I/O of my default song template so I don't have to bother doing the routing every time I want to do internal sampling in Reason.
The combi backdrop is a screenshot of the back of the rack wiring, so it's easy to remember how to wire this Combi.
.
The combi backdrop is a screenshot of the back of the rack wiring, so it's easy to remember how to wire this Combi.
.
I'm loving Ravenherz DEG, I only wish it had a bypass switch or something for the audio signal. As it is now, I have to route my own audio & CV bypass switches... a small inconvenience, but it would be nice to have that built into the device. So I built this Combi that does the job... and more, you just have to connect the Front8 CV outs.
Requires free REs: DEG, DVC, Lolth, CVA-7, Front8, A/B Switch, A/B 12 Audio Out Switch.
A HUGE THANK YOU to all the Devs who gave us these wonderful devices for free! We love you!!
Requires free REs: DEG, DVC, Lolth, CVA-7, Front8, A/B Switch, A/B 12 Audio Out Switch.
A HUGE THANK YOU to all the Devs who gave us these wonderful devices for free! We love you!!
Just connect Front8's first three CV inputs to your CV source and then connect Front8's 8 CV outputs to your destinations.
Use the Combi buttons to turn the connections on and off... have fun experimenting with CV!
Use the Combi buttons to turn the connections on and off... have fun experimenting with CV!
I figured I would consolidate my Combi patches into one thread
Here's a combi for Retouch Control NoteRepeat. It uses 3 instances of RoboticBean Euclid (as External Pattern inputs), which are controllable from the combi face. NoteRepeat's note on trigger can be turned on (via ModWheel) or automated (via LFO).
Connect CVPT's output Gate/note to instrument.
Requires:
Retouch Control NoteRepeat (paid)
RoboticBean Euclid (paid)
TonicMint AB Tranpose (free)
Pongasoft AB Switch (free)
Lectric Panda CVTP (free)
Download: . .
Connect CVPT's output Gate/note to instrument.
Requires:
Retouch Control NoteRepeat (paid)
RoboticBean Euclid (paid)
TonicMint AB Tranpose (free)
Pongasoft AB Switch (free)
Lectric Panda CVTP (free)
Download: . .
[attachment=1
-
- Information
-
Who is online
Users browsing this forum: No registered users and 10 guests