Interesting. Thanks for the update!turn2on wrote: ↑21 May 2021Update v.1.0.3.
https://www.reasonstudios.com/shop/rack ... rb-effect/
New Regen parameter "SCALE": Used for tuning the Regen decay (Underwater section) upwards or downwards. * After Scale active changes, Regen Character is reloading. For smoothing this, add the AirVerb Decay parameter value.
BlueDepth / Epic Motion Reverb FX (by Turn2on)
-
- Competition Winner
- Posts: 1088
- Joined: 31 Aug 2015
- Location: Melbourne, AU
-
- Competition Winner
- Posts: 1088
- Joined: 31 Aug 2015
- Location: Melbourne, AU
The submarine graphic on the front panel (which moves with the depth control) is low res and pixelated on the HD version.
-
- RE Developer
- Posts: 845
- Joined: 13 Mar 2015
Thank you for this finding. Will be fixed soon.
-
- Posts: 97
- Joined: 29 Jan 2017
omg please NO!
unless there's a button on the back that can switch the front panel parameters to explain what they ACTUALLY do.
i don't want a toy, i want to be able to predictably achieve the sound i am trying to design
-
- Posts: 97
- Joined: 29 Jan 2017
i wanted to love this one so much. i have a lot of uses for this sort of sound... but i wound up NOT loving it in the end because it's COMPLETELY incomprehensible. It's impossible to understand the internal routing in a way that makes it possible to achieve PREDICTABLE results. And i typically have NO problem achieving exactly what i hear in my mind in LOTS of other gear. I have, no exaggeration, HUNDREDS of plugins. I understand what those other devices' parameters do to the sound. In this one it ALWAYS feels like trying to achieve a sound "blindfolded"... or better yet, with earplugs in. It's like GUESSING.
Even the block diagrams in the manual don't make signal flow make any sense. I kind of wish there was a button on the back that would, when pressed, change the names of the parameters on the front to be what they are ACTUALLY doing from a sound design perspective. I'm a reasonably logical person, and i find this device VERY VERY tempting to keep trying to use, but every time i do, i wind up frustrated, and replace it with other device-combinations to achieve sounds i suspect this verb could achieve - but since the device puts more importance on 'fun' parameter naming and a nautical theme, it completely sacrifices usability. Could the manual be updated to show the TRUE routing of the audio signal?? I'd use this regularly if it wasn't such a experimental process to use.
Even the block diagrams in the manual don't make signal flow make any sense. I kind of wish there was a button on the back that would, when pressed, change the names of the parameters on the front to be what they are ACTUALLY doing from a sound design perspective. I'm a reasonably logical person, and i find this device VERY VERY tempting to keep trying to use, but every time i do, i wind up frustrated, and replace it with other device-combinations to achieve sounds i suspect this verb could achieve - but since the device puts more importance on 'fun' parameter naming and a nautical theme, it completely sacrifices usability. Could the manual be updated to show the TRUE routing of the audio signal?? I'd use this regularly if it wasn't such a experimental process to use.
-
- Posts: 3534
- Joined: 16 Jan 2015
- Location: Contest Weiner
I too have no idea what's happening behind the GUI, but there it sits in my startup template.
Turn2on have many wonderful effects. I try not to let my lack of understanding hold me back too much. YMMV
Turn2on have many wonderful effects. I try not to let my lack of understanding hold me back too much. YMMV
Who’s using the royal plural now baby? 🧂
-
- RE Developer
- Posts: 845
- Joined: 13 Mar 2015
Thank you for talk about this problem of creative parameter names.
I try to make new scheme and parameter names as option or as integrated scheme. Need some time for this
Fx was been inspired by very limited and interesting idea with same experimental manual and parameter names. So our device much much bigger and massive and may be really play of words lost some understanding, but think that manual is helped.
I try to make new scheme and parameter names as option or as integrated scheme. Need some time for this
Fx was been inspired by very limited and interesting idea with same experimental manual and parameter names. So our device much much bigger and massive and may be really play of words lost some understanding, but think that manual is helped.
-
- Posts: 1025
- Joined: 19 Jan 2015
- Location: hear
Actually I feel it´s fine the way it is. Like the names and the experimental character it introduces. Then I don´t think it´s that confusing when working with it.
Some devices are ment to be predictable, some less, some don´t. Feel this one is a little in middle. Embrass experimentation.
Some devices are ment to be predictable, some less, some don´t. Feel this one is a little in middle. Embrass experimentation.
etyrnal2 wrote: ↑15 Jul 2022i wanted to love this one so much. i have a lot of uses for this sort of sound... but i wound up NOT loving it in the end because it's COMPLETELY incomprehensible. It's impossible to understand the internal routing in a way that makes it possible to achieve PREDICTABLE results. And i typically have NO problem achieving exactly what i hear in my mind in LOTS of other gear. I have, no exaggeration, HUNDREDS of plugins. I understand what those other devices' parameters do to the sound. In this one it ALWAYS feels like trying to achieve a sound "blindfolded"... or better yet, with earplugs in. It's like GUESSING.
Even the block diagrams in the manual don't make signal flow make any sense. I kind of wish there was a button on the back that would, when pressed, change the names of the parameters on the front to be what they are ACTUALLY doing from a sound design perspective. I'm a reasonably logical person, and i find this device VERY VERY tempting to keep trying to use, but every time i do, i wind up frustrated, and replace it with other device-combinations to achieve sounds i suspect this verb could achieve - but since the device puts more importance on 'fun' parameter naming and a nautical theme, it completely sacrifices usability. Could the manual be updated to show the TRUE routing of the audio signal?? I'd use this regularly if it wasn't such a experimental process to use.
-
- Competition Winner
- Posts: 1543
- Joined: 14 Nov 2016
Just testing out all of them for the first time, BLUE has a different character...
Really feels like underwater, and not martian... wonderful!
Really feels like underwater, and not martian... wonderful!
-
- RE Developer
- Posts: 845
- Joined: 13 Mar 2015
Shceme have some corrections now:
Now I already prepare update (add "info" mode, to show real propty names), msall GUI fixes. But it can be published after 15th August.
Now I already prepare update (add "info" mode, to show real propty names), msall GUI fixes. But it can be published after 15th August.
-
- Posts: 3534
- Joined: 16 Jan 2015
- Location: Contest Weiner
I must say, in addition to their marvelous effects, Turn2on's quick response to customer feedback is top notch.
Now there will be new labels that I also don't understand.
Understanding is overrated
Now there will be new labels that I also don't understand.
Understanding is overrated
Who’s using the royal plural now baby? 🧂
-
- Posts: 1025
- Joined: 19 Jan 2015
- Location: hear
-
- RE Developer
- Posts: 845
- Joined: 13 Mar 2015
Please if you have any questions, ask.
In new labels (it’s only additional labels in mode “Info”)
- Submersion section. This is technically a -1 Octave Pitch Shifted signal section. Pitch shifter section have Mix control knob (depth of pitch shifter signal), feedback and buffer duration = Direction finder (how long is pitch shifter granules).
- Underwater section:
Reflection = Pre Delay.
Scale = Tuning of tails for underwater processed signal.
This is a main info additions.
All previous labels saved as default, I not change anything, info mode is a new small “i” button that change some labels from creative names to technical side names.
If you have question please ask, and we try to make device more opened for understanding.
Technically AIR verb is a basic reverb, routed to output. Parallel signal from it coming also to Underwater reverb section (14 algorithmic modes), and that also routed thru the Submersion (-1 oct pitch shifted processing) back to the AIR section.
So you have finally hybrid of analog emulated airy reverb, algorithmic underwater feeling reverb with tuning of tails, and pitch shifter (static -1 oct) proccessing. All routed back to Airy reverb.
Pitch shifter signal with -1 octave create subs on reverb for submersion feelings, airy + submersion reverbs helps to create lush reverbs.
One of the interesting knob is a RG+SB WET knob (control wet level of Submersion and Underwater Regen sections), routed finally back to the Air verb section at the same time.
Really FX have some routings. I prefer to use default creative names that have names of feelings what you listen, but at technical side creative names now duplicated to what this parameters really do.
In new labels (it’s only additional labels in mode “Info”)
- Submersion section. This is technically a -1 Octave Pitch Shifted signal section. Pitch shifter section have Mix control knob (depth of pitch shifter signal), feedback and buffer duration = Direction finder (how long is pitch shifter granules).
- Underwater section:
Reflection = Pre Delay.
Scale = Tuning of tails for underwater processed signal.
This is a main info additions.
All previous labels saved as default, I not change anything, info mode is a new small “i” button that change some labels from creative names to technical side names.
If you have question please ask, and we try to make device more opened for understanding.
Technically AIR verb is a basic reverb, routed to output. Parallel signal from it coming also to Underwater reverb section (14 algorithmic modes), and that also routed thru the Submersion (-1 oct pitch shifted processing) back to the AIR section.
So you have finally hybrid of analog emulated airy reverb, algorithmic underwater feeling reverb with tuning of tails, and pitch shifter (static -1 oct) proccessing. All routed back to Airy reverb.
Pitch shifter signal with -1 octave create subs on reverb for submersion feelings, airy + submersion reverbs helps to create lush reverbs.
One of the interesting knob is a RG+SB WET knob (control wet level of Submersion and Underwater Regen sections), routed finally back to the Air verb section at the same time.
Really FX have some routings. I prefer to use default creative names that have names of feelings what you listen, but at technical side creative names now duplicated to what this parameters really do.
-
- Posts: 3501
- Joined: 15 Jan 2015
never had an issue with this rack... love it.
https://soundcloud.com/moneykube-qube/s ... d-playlist
Proud Member Of The Awesome League Of Perpetuals
Proud Member Of The Awesome League Of Perpetuals
-
- Posts: 3534
- Joined: 16 Jan 2015
- Location: Contest Weiner
Thanks T2O for further explanations!
Who’s using the royal plural now baby? 🧂
-
- Posts: 3534
- Joined: 16 Jan 2015
- Location: Contest Weiner
P.S. I'm playing this one like I'm some kind of ignorant geek who understands next to nothing.
Unlike my real self
Unlike my real self
Who’s using the royal plural now baby? 🧂
-
- RE Developer
- Posts: 845
- Joined: 13 Mar 2015
Update 1.0.4 in the shop:
https://www.reasonstudios.com/shop/rack ... rb-effect/
- Small GUI fixes
- Rear Panel CV Input sections reorganised (now devided to individual sections Air, Submersion and Underwater) for better understanding structure of device.
- “i” mode at front panel: additional label names mode, that show functionality names of some device controls (knobs) vs default creative names (for understanding what is current knob is really do).
small Reverb engine optimisation
https://www.reasonstudios.com/shop/rack ... rb-effect/
- Small GUI fixes
- Rear Panel CV Input sections reorganised (now devided to individual sections Air, Submersion and Underwater) for better understanding structure of device.
- “i” mode at front panel: additional label names mode, that show functionality names of some device controls (knobs) vs default creative names (for understanding what is current knob is really do).
small Reverb engine optimisation
-
- Posts: 3534
- Joined: 16 Jan 2015
- Location: Contest Weiner
Who’s using the royal plural now baby? 🧂
-
- RE Developer
- Posts: 845
- Joined: 13 Mar 2015
Blue Depth / Update 1.0.5
https://www.reasonstudios.com/shop/
GUI Bugfix: Osc Depth text labels was been blurred (more actual at Windows version)
https://www.reasonstudios.com/shop/
GUI Bugfix: Osc Depth text labels was been blurred (more actual at Windows version)
-
- Information
-
Who is online
Users browsing this forum: No registered users and 2 guests