Hightlight the clips you intent to loop and hit P. Not really what you're asking for but maybe a bit faster than moving around the markers.
Reason 12 Wishlist
- Electric-Metal
- Posts: 667
- Joined: 10 Dec 2015
- Location: Landstuhl, Germany
The question is - Who cares
- kuhliloach
- Posts: 881
- Joined: 09 Dec 2015
I wish for a Reason that would somehow make me want to use it as a DAW again, rather than a plug-in inside of Logic. It would need to become something that is actively developed.
- bluebeatshelter
- Posts: 2
- Joined: 05 Dec 2019
- Location: Hannover, Germany
- Contact:
Midi Out on VSTs or some advanced Midi In routing (1 in routeable to 2 (n) Midi/VST tracks would be nice.
And please make the GUI scale able. This is even more important to me than the Midi stuff...
And please make the GUI scale able. This is even more important to me than the Midi stuff...
Electric-Metal wrote: ↑31 Oct 2020You can move your loop region by bar or by loop length using option+shift+up or down, or option+up or down
- Creativemind
- Posts: 4876
- Joined: 17 Jan 2015
- Location: Stoke-On-Trent, England, UK
I know what you mean by Multiband Scream now. Like multiband distortion etc. That would be brilliant. Add Clip Distortion and normal Saturation as opposed to Tape Saturation as well (just a different algorithm) and make all the parameters in the right readings (but if they didn't program the readings they have now to correspond with real readings at the same dial position, it wouldn't be backwards compatible or at least the dial at that position wouldn't be correct to what the new reading was if you get me). What else for a Scream 5?Creativemind wrote: ↑13 Jun 2020Multiband Scream?Bobbyd93 wrote: ↑07 Jun 2020Reason Gold effects - Apply more parameters and control to the reason classics effects e.g. multiband scream, more comprehensive EQ control for RV7000, separate devices for sometimes unknown devices e.g. who would have thought “pulveriser” has a tremolo unless you’ve used Reason for years?
Yes, maybe (if they update the browser to allow searching of devices within projects) they could throw in, if searching tremolo patches, Pulveriser comes up so it's tagged by Reason Studios, then hopefully it would spur on the user to think, hmmm, why has Pulveriser come up here, better check that out..hey presto!
Reason Studio's 11.3 / Cockos Reaper 6.82 / Cakewalk By Bandlab / Orion 8.6
http://soundcloud.com/creativemind75/iv ... soul-mix-3
one thing I've been wanting lately (though I may have already mentioned it--can't remember)....a shortcut binding for toggling the 'Return to last start position on stop' setting. or even better, a shortcut AND the ability to contextually tie the behavior you want to a particular type of editing. for example, when I've got the Pitch Editor open, I almost always want 'Return to last start position' turned off, but most everywhere else I want it on.
LukeDunn wrote: ↑01 Nov 2020Thanks Luke.Electric-Metal wrote: ↑31 Oct 2020
You can move your loop region by bar or by loop length using option+shift+up or down, or option+up or down
VST hosting within the RRP.
- Creativemind
- Posts: 4876
- Joined: 17 Jan 2015
- Location: Stoke-On-Trent, England, UK
Yeah, developed a lot. There's just too much missing as they've let it slip further and further behind. It needs at least 60 features imo. I would like 100.kuhliloach wrote: ↑31 Oct 2020I wish for a Reason that would somehow make me want to use it as a DAW again, rather than a plug-in inside of Logic. It would need to become something that is actively developed.
Reason Studio's 11.3 / Cockos Reaper 6.82 / Cakewalk By Bandlab / Orion 8.6
http://soundcloud.com/creativemind75/iv ... soul-mix-3
- Creativemind
- Posts: 4876
- Joined: 17 Jan 2015
- Location: Stoke-On-Trent, England, UK
+1 for that and VST3 too. I wanted to use a VST in a Combinator in the RRP the other day and then save it as a patch but obviously couldn't.
Reason Studio's 11.3 / Cockos Reaper 6.82 / Cakewalk By Bandlab / Orion 8.6
http://soundcloud.com/creativemind75/iv ... soul-mix-3
It would make the RRP a lot more useful for most users, particularly in terms of using all of the wonderful Reason modulators on your VST synths and FX.Creativemind wrote: ↑03 Nov 2020+1 for that and VST3 too. I wanted to use a VST in a Combinator in the RRP the other day and then save it as a patch but obviously couldn't.
- Creativemind
- Posts: 4876
- Joined: 17 Jan 2015
- Location: Stoke-On-Trent, England, UK
Yeah, would be great and I don't know why this wasn't included in the first place. People have said well it might mean you could load the RRP in itself, they could just program it into the RRP something that stopped that from happening couldn't they?zoidkirb wrote: ↑03 Nov 2020It would make the RRP a lot more useful for most users, particularly in terms of using all of the wonderful Reason modulators on your VST synths and FX.Creativemind wrote: ↑03 Nov 2020
+1 for that and VST3 too. I wanted to use a VST in a Combinator in the RRP the other day and then save it as a patch but obviously couldn't.
Does anyone know if the FL Studio VST allows VST's in it?
Reason Studio's 11.3 / Cockos Reaper 6.82 / Cakewalk By Bandlab / Orion 8.6
http://soundcloud.com/creativemind75/iv ... soul-mix-3
I've seen that said to be a potential problem (I'm thinking of Mattias' 'inception warning') but I think there's no basis for that claim. I've been using Plugin Guru's Unify which is a host that lets you route and modulate layers of vsti/vst fx as a vst inside your daw, somewhat similar to the RRP. It not only allows, but encourages users to layer instances of Unify inside of itself (that's useful for modulating macros) .Creativemind wrote: ↑04 Nov 2020Yeah, would be great and I don't know why this wasn't included in the first place. People have said well it might mean you could load the RRP in itself, they could just program it into the RRP something that stopped that from happening couldn't they?
Does anyone know if the FL Studio VST allows VST's in it?
You can easily run multiple instances of RRP inside layers within layers of Unify already too.
- artmessiah
- Posts: 91
- Joined: 22 Apr 2017
- Location: Virginia Beach
- Contact:
Probably already mentioned, but multi timberal/multi outs for Kontakt and other vsti's with that option would be great. Also Folder tracks and volume/pan options on sequencer tracks would be all I need.
**** Oh and The implementation of VST3 and Midi Vst should be included in the next update.
**** Oh and The implementation of VST3 and Midi Vst should be included in the next update.
- Creativemind
- Posts: 4876
- Joined: 17 Jan 2015
- Location: Stoke-On-Trent, England, UK
Yeah where the heck is this update. God it's been months. They said after 11 was released, don't worry about the lack of features 'cause point updates will be coming then something (as in this gui update) hold things up. Last major release (was it?) the optimisation of the vst (which yeah was very very needed) stopped a point update coming out with functional features imo.artmessiah wrote: ↑04 Nov 2020Probably already mentioned, but multi timberal/multi outs for Kontakt and other vsti's with that option would be great. Also Folder tracks and volume/pan options on sequencer tracks would be all I need.
**** Oh and The implementation of VST3 and Midi Vst should be included in the next update.
To be honest, I'm about ready to give up on Reason. I know I kinda have anyway as I'm using the RRP in Reaper now but I would come back to Reason but would take a hell of a lot of features temp me back now (at least 30.)
Reason Studio's 11.3 / Cockos Reaper 6.82 / Cakewalk By Bandlab / Orion 8.6
http://soundcloud.com/creativemind75/iv ... soul-mix-3
I'm guessing the pandemic has caused some delays as people transition to working from home more often.Creativemind wrote: ↑05 Nov 2020
Yeah where the heck is this update. God it's been months. They said after 11 was released, don't worry about the lack of features 'cause point updates will be coming then something (as in this gui update) hold things up. Last major release (was it?) the optimisation of the vst (which yeah was very very needed) stopped a point update coming out with functional features imo.
- Creativemind
- Posts: 4876
- Joined: 17 Jan 2015
- Location: Stoke-On-Trent, England, UK
Oh yeah, you're probably right.jjrh wrote: ↑05 Nov 2020I'm guessing the pandemic has caused some delays as people transition to working from home more often.Creativemind wrote: ↑05 Nov 2020
Yeah where the heck is this update. God it's been months. They said after 11 was released, don't worry about the lack of features 'cause point updates will be coming then something (as in this gui update) hold things up. Last major release (was it?) the optimisation of the vst (which yeah was very very needed) stopped a point update coming out with functional features imo.
Reason Studio's 11.3 / Cockos Reaper 6.82 / Cakewalk By Bandlab / Orion 8.6
http://soundcloud.com/creativemind75/iv ... soul-mix-3
there have been two, or maybe three point updates to v11 so far, no?
they never said the high resolution update would be included in a point update.
they never said the high resolution update would be included in a point update.
Oh yes, it would be so nice to control/remote the single blocks in the sequencer lane. Simply with Remote override and connected with the pads on my Launchkey ... for example.
- Creativemind
- Posts: 4876
- Joined: 17 Jan 2015
- Location: Stoke-On-Trent, England, UK
No but when people said that the features in Reason 11 were very light, they said but 11 isn't done yet (as in wait and see what comes in the point updates in terms of features) and guess what, nothing.
Reason Studio's 11.3 / Cockos Reaper 6.82 / Cakewalk By Bandlab / Orion 8.6
http://soundcloud.com/creativemind75/iv ... soul-mix-3
-
- Information
-
Who is online
Users browsing this forum: No registered users and 7 guests