Enlightenspeed Melodic Inverter is in the shop
In your account in the rack extension section there is a sync all button. This should redownload all REs.
- Enlightenspeed
- RE Developer
- Posts: 1105
- Joined: 03 Jan 2019
Ok, my bad. As Jam-S said...Trygve Larsen wrote: β09 Feb 2020Ok, so I deleted it... When I went back to the shop to download it again, there was no trial available anymore, just a message saying that I had tried it already...
Then, I tried another of ur track Extensions, the Note Alter. Same again. Did not show up in the Rack Extension folder menu. So I was thinking, let me check it out, if it is somewhere else. And THERE it was ! In the PLAYER MENU ! So perhaps that WAS also the case with the Note Inverter? I did not check it out then. Seems like I just have to trust it works the way I am hoping for, and just buy it right away...
OR, perhaps there is a way to reset the reason shop download history. I guess I will contact customer service to ask that...
The Rack Extension is still available to you, even though you have deleted it, and it will be for the duration of the trial period. You can reinstall by going into your account page, then going to My Products and clicking the Rack Extensions tab and either hitting Sync All, or finding the entry and downloading it again; you would typically do it this way if there was something you didn't want to download at the time, like a large soundbank you weren't using, for example. The entries in your Rack Extensions section are listed in alphabetical order of the company, so in this case under E for Enlightenspeed.
It won't show under the Rack Extensions folder because that is actually the patches/content folder, so basically devices that don't need patches for whatever reason will not show up there. You just go into the Players folder for these two. Presently all Enlightenspeed plugins are Players.
Hope this helps, and sorry for being a little fuzzy headed before.
Thanks,
Brian
- Enlightenspeed
- RE Developer
- Posts: 1105
- Joined: 03 Jan 2019
Good to see you got it working ...and thanks again for your interest.
- Enlightenspeed
- RE Developer
- Posts: 1105
- Joined: 03 Jan 2019
Hey folks,
Iβm hoping to have this available for testing within the next week or two, providing no weird issues turn up.
As can probably be guessed by the poll, the Boombastix design is the winner Thanks again to them for helping me out so much, it really is appreciated; and thanks to the voters for taking the time to consider the choices as well.
So whoever fancies testing please PM me, but keep in mind it will still be a few days before it turns up. The sale period for it end on the 15th of March, and Iβm confident that it will be available for then. Itβs still going to be called Melodic Inverter but Iβm truth it is sooooo much more than that now.
Once again thanks to everyone, and hopefully Iβll be passing out test licenses really soon.
Many thanks,
Brian
Iβm hoping to have this available for testing within the next week or two, providing no weird issues turn up.
As can probably be guessed by the poll, the Boombastix design is the winner Thanks again to them for helping me out so much, it really is appreciated; and thanks to the voters for taking the time to consider the choices as well.
So whoever fancies testing please PM me, but keep in mind it will still be a few days before it turns up. The sale period for it end on the 15th of March, and Iβm confident that it will be available for then. Itβs still going to be called Melodic Inverter but Iβm truth it is sooooo much more than that now.
Once again thanks to everyone, and hopefully Iβll be passing out test licenses really soon.
Many thanks,
Brian
- Enlightenspeed
- RE Developer
- Posts: 1105
- Joined: 03 Jan 2019
Hi Folks,
apologies for the delay with the beta testing. I had hoped to have a working final build up by last weekend but the rest of life caught up, and time ended up being at a premium. We should definitely have a working build in place without much by way of bugs by Friday at the latest. Don't anticipate anything by way of bugs as it is pretty solid just now and just needs some final features added in.
I'll let folks know when licenses are available.
Cheers,
Brian
apologies for the delay with the beta testing. I had hoped to have a working final build up by last weekend but the rest of life caught up, and time ended up being at a premium. We should definitely have a working build in place without much by way of bugs by Friday at the latest. Don't anticipate anything by way of bugs as it is pretty solid just now and just needs some final features added in.
I'll let folks know when licenses are available.
Cheers,
Brian
- Enlightenspeed
- RE Developer
- Posts: 1105
- Joined: 03 Jan 2019
.....and finally!
We now have the build for the 1.1 upgrade uploading. To call this an update/upgrade of course, really doesn't do it justice!
There is now 16 algorithms on board, 4 main algorithms and the rest are nice variations on he same theme, available in Sequencer, Step and Global modes, along with a healthy set of randomizing options.
I've still got a couple of cool new features that I want to add for the 1.2 version, but ran out of time for this deadline due to work commitments.
Licenses for all testers should be available within the next hour or so, depending on the RS build server workload.
Many thanks,
Brian
We now have the build for the 1.1 upgrade uploading. To call this an update/upgrade of course, really doesn't do it justice!
There is now 16 algorithms on board, 4 main algorithms and the rest are nice variations on he same theme, available in Sequencer, Step and Global modes, along with a healthy set of randomizing options.
I've still got a couple of cool new features that I want to add for the 1.2 version, but ran out of time for this deadline due to work commitments.
Licenses for all testers should be available within the next hour or so, depending on the RS build server workload.
Many thanks,
Brian
- Enlightenspeed
- RE Developer
- Posts: 1105
- Joined: 03 Jan 2019
OK,
Most test licenses have now been added, but unfortunately I've lost the file that tells me who's username on PH relates tothe name on here, so if you aren't on the list but usually are, please PM me, and accept my apologies. I got most of the ones I recognise, but there's always a couple.
Cheers,
Brian
Most test licenses have now been added, but unfortunately I've lost the file that tells me who's username on PH relates tothe name on here, so if you aren't on the list but usually are, please PM me, and accept my apologies. I got most of the ones I recognise, but there's always a couple.
Cheers,
Brian
- Enlightenspeed
- RE Developer
- Posts: 1105
- Joined: 03 Jan 2019
By the way, I'll open a new thread with more details on everything. Everything is finished except that some GUI labelling is still needed but most the text-tips are correct already, so they can tell you what is what. I'll add a new thread though asap because the complexity of this thing is quite considerably higher than v1, as should be obvious.Enlightenspeed wrote: β06 Mar 2020OK,
Most test licenses have now been added, but unfortunately I've lost the file that tells me who's username on PH relates tothe name on here, so if you aren't on the list but usually are, please PM me, and accept my apologies. I got most of the ones I recognise, but there's always a couple.
Cheers,
Brian
cheers,
Brian
- Boombastix
- Competition Winner
- Posts: 1929
- Joined: 18 May 2018
- Location: Bay Area, CA
How do I get the sequencer to start running? I cannot get the yellow dot to move.Enlightenspeed wrote: β06 Mar 2020By the way, I'll open a new thread with more details on everything. Everything is finished except that some GUI labelling is still needed but most the text-tips are correct already, so they can tell you what is what. I'll add a new thread though asap because the complexity of this thing is quite considerably higher than v1, as should be obvious.Enlightenspeed wrote: β06 Mar 2020OK,
Most test licenses have now been added, but unfortunately I've lost the file that tells me who's username on PH relates tothe name on here, so if you aren't on the list but usually are, please PM me, and accept my apologies. I got most of the ones I recognise, but there's always a couple.
Cheers,
Brian
cheers,
Brian
10% off at Waves with link: https://www.waves.com/r/6gh2b0
Disclaimer - I get 10% as well.
Disclaimer - I get 10% as well.
- Enlightenspeed
- RE Developer
- Posts: 1105
- Joined: 03 Jan 2019
Sorry, I should have got to this earlier.Boombastix wrote: β07 Mar 2020How do I get the sequencer to start running? I cannot get the yellow dot to move.Enlightenspeed wrote: β06 Mar 2020
By the way, I'll open a new thread with more details on everything. Everything is finished except that some GUI labelling is still needed but most the text-tips are correct already, so they can tell you what is what. I'll add a new thread though asap because the complexity of this thing is quite considerably higher than v1, as should be obvious.
cheers,
Brian
You just have the sequencer active and set it to sequencer mode, as opposed to global or step
- Boombastix
- Competition Winner
- Posts: 1929
- Joined: 18 May 2018
- Location: Bay Area, CA
That's what I did... Setup the beta thread and we can discuss there?Enlightenspeed wrote: β07 Mar 2020Sorry, I should have got to this earlier.Boombastix wrote: β07 Mar 2020
How do I get the sequencer to start running? I cannot get the yellow dot to move.
You just have the sequencer active and set it to sequencer mode, as opposed to global or step
10% off at Waves with link: https://www.waves.com/r/6gh2b0
Disclaimer - I get 10% as well.
Disclaimer - I get 10% as well.
- Enlightenspeed
- RE Developer
- Posts: 1105
- Joined: 03 Jan 2019
Hi,Boombastix wrote: β07 Mar 2020That's what I did... Setup the beta thread and we can discuss there?Enlightenspeed wrote: β07 Mar 2020
Sorry, I should have got to this earlier.
You just have the sequencer active and set it to sequencer mode, as opposed to global or step
I have now setup the beta area thread. Sorry for the delay, but I was already well advanced in my Saturday "entertainment schedule" by the time I read this
Thanks,
Brian
- Enlightenspeed
- RE Developer
- Posts: 1105
- Joined: 03 Jan 2019
Hi folks,
hope you are all well and healthy, and that you are enjoying the extra time with friends and family, if you are lucky enough to be getting more time with them.
I just wanted to give a heads up on this; we've been pushing it through acceptance testing with RS, and it was getting there slowly due to a couple of unforeseen bugs that the RS testers found for us. We now have everything fixed and good to go, but our last build went over on Friday afternoon and it seems that most of Europe just shuddered to a complete halt on Friday night, or at least the bits that hadn't already done so did (incl. Scotland, of course).
The intention was to have this out by the 15th, which is why the sale price ended at that point, but the Shop is under the same lockdown scenarios as the testing... so, in short, we are unable to either extend the sale price, or deliver the plugin at this time. This is a little frustrating for us because we made promises regarding the deadlines, but everyone's health must take priority at this time, and we are in agreement with the decisions of various governments to go into lockdown.
So, hopefully, things will get through soon, but please understand that there is of course very little that either Enlightenspeed or Reason Studios can do to alleviate delays to the various processes.
Thank you for your patience, and please (!!!) stay safe and healthy,
Brian
hope you are all well and healthy, and that you are enjoying the extra time with friends and family, if you are lucky enough to be getting more time with them.
I just wanted to give a heads up on this; we've been pushing it through acceptance testing with RS, and it was getting there slowly due to a couple of unforeseen bugs that the RS testers found for us. We now have everything fixed and good to go, but our last build went over on Friday afternoon and it seems that most of Europe just shuddered to a complete halt on Friday night, or at least the bits that hadn't already done so did (incl. Scotland, of course).
The intention was to have this out by the 15th, which is why the sale price ended at that point, but the Shop is under the same lockdown scenarios as the testing... so, in short, we are unable to either extend the sale price, or deliver the plugin at this time. This is a little frustrating for us because we made promises regarding the deadlines, but everyone's health must take priority at this time, and we are in agreement with the decisions of various governments to go into lockdown.
So, hopefully, things will get through soon, but please understand that there is of course very little that either Enlightenspeed or Reason Studios can do to alleviate delays to the various processes.
Thank you for your patience, and please (!!!) stay safe and healthy,
Brian
Maybe I am just too stupid but I think it is not possible to automate the on/off button of this player rack extension. Anybody knows why or if this will be fixed.
I am so sad right now, because I build a track around the idea to switch between Negate and Melodic Inverter and now I can't to this
I am so sad right now, because I build a track around the idea to switch between Negate and Melodic Inverter and now I can't to this
Enlightenspeed wrote: β23 Mar 2020Hi folks,
hope you are all well and healthy, and that you are enjoying the extra time with friends and family, if you are lucky enough to be getting more time with them.
I just wanted to give a heads up on this; we've been pushing it through acceptance testing with RS, and it was getting there slowly due to a couple of unforeseen bugs that the RS testers found for us. We now have everything fixed and good to go, but our last build went over on Friday afternoon and it seems that most of Europe just shuddered to a complete halt on Friday night, or at least the bits that hadn't already done so did (incl. Scotland, of course).
The intention was to have this out by the 15th, which is why the sale price ended at that point, but the Shop is under the same lockdown scenarios as the testing... so, in short, we are unable to either extend the sale price, or deliver the plugin at this time. This is a little frustrating for us because we made promises regarding the deadlines, but everyone's health must take priority at this time, and we are in agreement with the decisions of various governments to go into lockdown.
So, hopefully, things will get through soon, but please understand that there is of course very little that either Enlightenspeed or Reason Studios can do to alleviate delays to the various processes.
Thank you for your patience, and please (!!!) stay safe and healthy,
Brian
Any news on the release?
- Enlightenspeed
- RE Developer
- Posts: 1105
- Joined: 03 Jan 2019
It should be automateable, even in v1. Regardless, the fully updated version should be available really soonbigguy1 wrote: β30 Mar 2020Maybe I am just too stupid but I think it is not possible to automate the on/off button of this player rack extension. Anybody knows why or if this will be fixed.
I am so sad right now, because I build a track around the idea to switch between Negate and Melodic Inverter and now I can't to this
If you need it urgently, PM me your user name and I'll give you a test license for the new version.
Cheers,
Brian
- Enlightenspeed
- RE Developer
- Posts: 1105
- Joined: 03 Jan 2019
We passed acceptance testing, and now manuals etc have been submitted to the shop. Could be tomorrow, could be next week. I really can't say with any confidence because of the state the world is in right now. Stay safe and it'll be with you as soon as possible.Arjanders wrote: β31 Mar 2020Any news on the release?Enlightenspeed wrote: β23 Mar 2020Hi folks,
hope you are all well and healthy, and that you are enjoying the extra time with friends and family, if you are lucky enough to be getting more time with them.
I just wanted to give a heads up on this; we've been pushing it through acceptance testing with RS, and it was getting there slowly due to a couple of unforeseen bugs that the RS testers found for us. We now have everything fixed and good to go, but our last build went over on Friday afternoon and it seems that most of Europe just shuddered to a complete halt on Friday night, or at least the bits that hadn't already done so did (incl. Scotland, of course).
The intention was to have this out by the 15th, which is why the sale price ended at that point, but the Shop is under the same lockdown scenarios as the testing... so, in short, we are unable to either extend the sale price, or deliver the plugin at this time. This is a little frustrating for us because we made promises regarding the deadlines, but everyone's health must take priority at this time, and we are in agreement with the decisions of various governments to go into lockdown.
So, hopefully, things will get through soon, but please understand that there is of course very little that either Enlightenspeed or Reason Studios can do to alleviate delays to the various processes.
Thank you for your patience, and please (!!!) stay safe and healthy,
Brian
Thanks for the update!Enlightenspeed wrote: β31 Mar 2020We passed acceptance testing, and now manuals etc have been submitted to the shop. Could be tomorrow, could be next week. I really can't say with any confidence because of the state the world is in right now. Stay safe and it'll be with you as soon as possible.
-
- Information
-
Who is online
Users browsing this forum: No registered users and 23 guests