"Reason sound" tested :)
Yesterday a guy posted in Reason Users FB group that according to him Reason sounds sharper or harsher than other DAWs. The usual discussion ensued...
To get some hard data I've recreated the same simple "project" in 4 DAWs that I own (Bitwig 2.4, Live 10, Reason 10.2 and Studio One 4.1), using the same MIDI files and the same 6 VSTs with factory presets. I've not touched any faders (all at 0dB) or parameters anywhere, to ensure they play the same. All renders are 44kHz / 16bit. Standard routing applies, so eg. for Reason obviously all goes through SSL mixer, but it's untouched. Likewise there's no mixing whatsoever, no EQing, no side-chain compression, etc. so it sounds pretty shitty and there's even some clipping, because I couldn't turn down the patches
The project consists of (VST name / patch):
- pluck melody - Europa / Orbit Poly
- chords - Arturia DX7 V / Roards For Me
- bass - Synapse Dune 3 / Double Maker
- kick - NI Trk-01 Kick / Psy Zap
- hihats - U-He Zebra2 / Sleigh Hats
- master insert - Waves Abbey Road TG Mastering Chain / Mastering 1
The MIDI file, DAW project files and rendered wavs are at below link. Let's find out if anyone can say which file is from which DAW or at least which one is Reason
Good luck!!!
https://drive.google.com/open?id=1kl8jy ... i0IAMKwRke
To get some hard data I've recreated the same simple "project" in 4 DAWs that I own (Bitwig 2.4, Live 10, Reason 10.2 and Studio One 4.1), using the same MIDI files and the same 6 VSTs with factory presets. I've not touched any faders (all at 0dB) or parameters anywhere, to ensure they play the same. All renders are 44kHz / 16bit. Standard routing applies, so eg. for Reason obviously all goes through SSL mixer, but it's untouched. Likewise there's no mixing whatsoever, no EQing, no side-chain compression, etc. so it sounds pretty shitty and there's even some clipping, because I couldn't turn down the patches
The project consists of (VST name / patch):
- pluck melody - Europa / Orbit Poly
- chords - Arturia DX7 V / Roards For Me
- bass - Synapse Dune 3 / Double Maker
- kick - NI Trk-01 Kick / Psy Zap
- hihats - U-He Zebra2 / Sleigh Hats
- master insert - Waves Abbey Road TG Mastering Chain / Mastering 1
The MIDI file, DAW project files and rendered wavs are at below link. Let's find out if anyone can say which file is from which DAW or at least which one is Reason
Good luck!!!
https://drive.google.com/open?id=1kl8jy ... i0IAMKwRke
Last edited by antic604 on 21 Jan 2019, edited 1 time in total.
- Marco Raaphorst
- Posts: 2504
- Joined: 22 Jan 2015
- Location: The Hague, The Netherlands
- Contact:
Was phase sync on Europa enabled? If not you Unison and the blend of OSC is random.
Phase invert doesn't work on these files so they are totally different indeed.
Phase invert doesn't work on these files so they are totally different indeed.
When loading the wavefiles in Audicity, you can see there are some small differences between the files.
Have you exported the files with or without dither?
Have you exported the files with or without dither?
Latest track: https://www.youtube.com/watch?v=EjzYHe3D8f8
Reasonstudios 11 Roland Quadcapture | AMD Ryzen 5900x|Elektron Analog Heat Mk2|Diy 3 way SB Acoustics/Scanspeak studiomonitors | AKG K702 | Keystation 61 MK3 |BCR2000 |X-Touch Ext | MP Midi
Reasonstudios 11 Roland Quadcapture | AMD Ryzen 5900x|Elektron Analog Heat Mk2|Diy 3 way SB Acoustics/Scanspeak studiomonitors | AKG K702 | Keystation 61 MK3 |BCR2000 |X-Touch Ext | MP Midi
Load the project / patch and check for yourself. I was looking for a patch that sounded roughly the same every time it's triggerd but also wasn't dull, so that there's some texture to it. I know it's not a perfect test, but I guess if Reason indeed had "a sound" then it would be heard without going deep into the zoomed-in waveforms with magnifying glassMarco Raaphorst wrote: ↑10 Jan 2019Was phase sync on Europa enabled? If not you Unison and the blend of OSC is random.
Phase invert doesn't work on these files so they are totally different indeed.
-
- Posts: 3760
- Joined: 20 Oct 2017
- Location: Norway
- Contact:
Not that you can hear it, but since you always work at a 32 bit floating point within reason, rendering without dither does have an effect.
You don't have the ability to compare from start to finish an analog signal chain?
A signal chain consists of several components, such as amplifiers, data converters, interface, clocks and timing. The purpose of the signal chain is to gather and process data or apply system controls based on analysis of real-time information. Isn't it more important to understand the analog and digital world first, e.g. bells and alphorns from swiss and a fountain in front of the house that runs 24/7.
When I make people jump or shriek with surprise at the power of a sound then I know I have done my job!
A signal chain consists of several components, such as amplifiers, data converters, interface, clocks and timing. The purpose of the signal chain is to gather and process data or apply system controls based on analysis of real-time information. Isn't it more important to understand the analog and digital world first, e.g. bells and alphorns from swiss and a fountain in front of the house that runs 24/7.
When I make people jump or shriek with surprise at the power of a sound then I know I have done my job!
on a French forum, a huge subject has been created about the myth about the audio engine
it results that apart from some difference concerning the panoramic law, the reading of the wave or the plugin is done in a similar way, with phase opposition etc ... and that if some micro difference appear, then they are inaudible
the power of psycho acoustics is really very big
dial on a same red or blue synth can make us perceive differences!
then of course if we use internal material (eq, comp etc ...) then the files become different
it results that apart from some difference concerning the panoramic law, the reading of the wave or the plugin is done in a similar way, with phase opposition etc ... and that if some micro difference appear, then they are inaudible
the power of psycho acoustics is really very big
dial on a same red or blue synth can make us perceive differences!
then of course if we use internal material (eq, comp etc ...) then the files become different
- Marco Raaphorst
- Posts: 2504
- Joined: 22 Jan 2015
- Location: The Hague, The Netherlands
- Contact:
I don't have all these plugins.antic604 wrote: ↑10 Jan 2019Load the project / patch and check for yourself. I was looking for a patch that sounded roughly the same every time it's triggerd but also wasn't dull, so that there's some texture to it. I know it's not a perfect test, but I guess if Reason indeed had "a sound" then it would be heard without going deep into the zoomed-in waveforms with magnifying glassMarco Raaphorst wrote: ↑10 Jan 2019Was phase sync on Europa enabled? If not you Unison and the blend of OSC is random.
Phase invert doesn't work on these files so they are totally different indeed.
Only thing I know is that audio tracks will phase cancel in all DAWs. You are comparing randomised settings.
But really in 2019 are we still talking about Reason Sound? Or maybe I traveled in time?
The Reason Sound is a bit like Santa Claus...
Everyone knows that it doesn't exist but everyone talks about it
The Reason Sound is a bit like Santa Claus...
Everyone knows that it doesn't exist but everyone talks about it
Karim Le Mec : Dj/Producer/Label Owner ( 11.3+ R12 IMac 2016 21")
FOLLOW Karim Le Mec
https://www.youtube.com/user/lemecdj
https://karimlemec.weebly.com/
https://soundcloud.com/karimlemec
https://t.me/reasonstudiosworld
FOLLOW Karim Le Mec
https://www.youtube.com/user/lemecdj
https://karimlemec.weebly.com/
https://soundcloud.com/karimlemec
https://t.me/reasonstudiosworld
I'm not gonna say what I voted yet, but to my ears, the second file had the most noisy sound. The best sounding file was file 1.
But that was precisely the goal. I'm 100% sure that if I play the same wav file in 4 DAWs and render them they'll be identical. My goal was to show that even using VSTs and some master processing via Waves' plugin it still sounds virtually the same, even if 1s and 0s are not exactly the same.Marco Raaphorst wrote: ↑10 Jan 2019Only thing I know is that audio tracks will phase cancel in all DAWs. You are comparing randomised settings.
I'm tempted to say you're in wrong topic. Or at least have not read the OP...4filegate wrote: ↑10 Jan 2019You don't have the ability to compare from start to finish an analog signal chain?
A signal chain consists of several components, such as amplifiers, data converters, interface, clocks and timing. The purpose of the signal chain is to gather and process data or apply system controls based on analysis of real-time information. Isn't it more important to understand the analog and digital world first, e.g. bells and alphorns from swiss and a fountain in front of the house that runs 24/7.
When I make people jump or shriek with surprise at the power of a sound then I know I have done my job!
I understood perfectly what you said the first time.
It's just that it has very little to do with this topic.
If you think that discussing technical matters with regards to art is irrelevant (which I tend to agree with!) then just get off of your high horse and ignore this thread
-
- Posts: 3760
- Joined: 20 Oct 2017
- Location: Norway
- Contact:
The English quotes were interesting to read. Thanks!DiZo wrote: ↑10 Jan 2019on a French forum, a huge subject has been created about the myth about the audio engine
it results that apart from some difference concerning the panoramic law, the reading of the wave or the plugin is done in a similar way, with phase opposition etc ... and that if some micro difference appear, then they are inaudible
the power of psycho acoustics is really very big
dial on a same red or blue synth can make us perceive differences!
then of course if we use internal material (eq, comp etc ...) then the files become different
To those finding "differences" when looking at an audio editor -- remember, lots of synths will not render the same waveform on every render, due to random phase and many other possible random aspects of the oscillators, emulating analog hardware. This is normal. So, a "difference" in a mixdown, you can't just assume it's the DAW's mixdown engine! Deliberately random Oscillator elements are just one of many possible instrument and effect level wildcards that can change the resulting waveform.
while I appreciate the spirit of such testing, it's sort of like going through the trouble of re-proving the spherical shape of the earth; you're not going to change the minds of anyone who thinks it's flat, and you don't need to change the minds of the less nutty/conspiracy-theory-minded of us.
+1guitfnky wrote: ↑10 Jan 2019while I appreciate the spirit of such testing, it's sort of like going through the trouble of re-proving the spherical shape of the earth; you're not going to change the minds of anyone who thinks it's flat, and you don't need to change the minds of the less nutty/conspiracy-theory-minded of us.
The people whom this sort of thing is "for" are generally either not capable of and/or entirely resistant to having a worthwhile discussion about it. Oh well.
-
- Information
-
Who is online
Users browsing this forum: No registered users and 37 guests