Rob Papen Go2 Rack Extension Released!
- Carly(Poohbear)
- Competition Winner
- Posts: 2884
- Joined: 25 Jan 2015
- Location: UK
The Arp is going into a run away mode, so I play a note and the sequence plays, I stop playing and latch is set to off and it continues to play but it's playing clicks and pops not the sound and of course cycling around, this is when the Arp mode is set to Seq or SeqRst
Volume is way to loud, -2db once you reset the device.
Remotes missing and incorrect.
XY Time Quantization and XY Space Quantization are the wrong way around. (time is pointing to space and space is pointing to time)
Missing
Mod 4 Bypass
Mod 4 Source
Mod 4 Destination
Incorrect names (but can live with this one)
Arp Step Step 02
Arp Step Step 03
Arp Step Step 04
Arp Step Step 05
Arp Step Step 06
Arp Step Step 07
Arp Step Step 08
Arp Step Step 09
Arp Step Step 10
Arp Step Step 11
Arp Step Step 12
Arp Step Step 13
Arp Step Step 14
Arp Step Step 15
Arp Step Step 16
should be Arp Step Tied XX (note the tie remote for step 1 is correct: Arp Step Tied 01 )
Regards
PoohBear
----------------------------------------------------------------------------------------------------------
T&T's viewtopic.php?f=5&t=7503909
My Youtube channel https://www.youtube.com/channel/UCqCNsA ... p4cQF4j-8A
----------------------------------------------------------------------------------------------------------
My Soundcloud Page ....... Nektar Mappings
----------------------------------------------------------------------------------------------------------
great synth - nice price
I just checked out, this synth can be tuned microtonal using the modulation matrix.
The sequencer/arpeggiator is awesome ... maybe Rob can make a Player-RE featuring the sequencer/arpeggiator only?
The sequencer/arpeggiator is awesome ... maybe Rob can make a Player-RE featuring the sequencer/arpeggiator only?
Hmmm ... a GO2 song challenge would be great!
The VST Version sounds different (mabe different filters) and uses less DSP power.
- Carly(Poohbear)
- Competition Winner
- Posts: 2884
- Joined: 25 Jan 2015
- Location: UK
Please note I have released the Nektar Panorama P series mapping for the RE Go2..
PoohBear
----------------------------------------------------------------------------------------------------------
T&T's viewtopic.php?f=5&t=7503909
My Youtube channel https://www.youtube.com/channel/UCqCNsA ... p4cQF4j-8A
----------------------------------------------------------------------------------------------------------
My Soundcloud Page ....... Nektar Mappings
----------------------------------------------------------------------------------------------------------
PoohBear
----------------------------------------------------------------------------------------------------------
T&T's viewtopic.php?f=5&t=7503909
My Youtube channel https://www.youtube.com/channel/UCqCNsA ... p4cQF4j-8A
----------------------------------------------------------------------------------------------------------
My Soundcloud Page ....... Nektar Mappings
----------------------------------------------------------------------------------------------------------
- Carly(Poohbear)
- Competition Winner
- Posts: 2884
- Joined: 25 Jan 2015
- Location: UK
They have gate\note and other outputs for the arpeggiator...
if you are talking about the mapping viewtopic.php?f=12&t=7491466&p=401732#p401732
- Carly(Poohbear)
- Competition Winner
- Posts: 2884
- Joined: 25 Jan 2015
- Location: UK
Yea, as soon as i am on Reason again. In the meantime just init a Go2 and send a envelope to the CVout and put a CVA-7 on it. Than press a key.
Reason12, Win10
- Carly(Poohbear)
- Competition Winner
- Posts: 2884
- Joined: 25 Jan 2015
- Location: UK
Does seam to be a bit messed up, that "Fade" has quite an effect on the ENV !!Loque wrote: ↑21 Sep 2018Yea, as soon as i am on Reason again. In the meantime just init a Go2 and send a envelope to the CVout and put a CVA-7 on it. Than press a key.
Anyone noticed that the envelopes in the mod matrix do not retrigger and the curves are not "releasing"? I do not want to contact the support again for a possible bug - i did it way to often with this synth...
Got it so it would not retrigger, change the shape of the ENV and it starts to work again. <-I think this is down to the Env not finishing..
With "Fade" set to zero, Att,Dec to Sus part works but Release is ignored.
Set "Fade" with a positive value and from the sustain point it just increase until it hits 127 and just stays there and the reverse with a negative value (slopes down to zero).
In all cases Release does seam to be ignored...
Release is also ignored on the Filter Env (no Fade option).
Side note: This is the first product I have seen in the shop where there is no Product Support\Product Website links, could not find a manual on it (checked the VST as well).
Ok, now here is a simple patch. I tried the free env and the filter env. Both with nearly the same settings. The free env is also missing the sustain. Tbh, this looks weird. The frist VCA-7 shows the free env, the second the filter env.
Reason12, Win10
- Carly(Poohbear)
- Competition Winner
- Posts: 2884
- Joined: 25 Jan 2015
- Location: UK
Set you fade to 0 (in the middle) then you see the true effect of Sustain (you see the effect but it's still wrong )
You are right. I set the "fade" to -100, which make it go directly down. If i set it to 0 it behaves like the filter envelope. "Just" without a Release state. And now while i realized what you meant, why is there a Release state?Carly(Poohbear) wrote: ↑21 Sep 2018Set you fade to 0 (in the middle) then you see the true effect of Sustain (you see the effect but it's still wrong )
Retrigger wont work at all, as long as the amp envelope is active. Very strange...
Reason12, Win10
tried this tonight,,, wow,,, love it
https://soundcloud.com/moneykube-qube/s ... d-playlist
Proud Member Of The Awesome League Of Perpetuals
Proud Member Of The Awesome League Of Perpetuals
-
- Posts: 1423
- Joined: 21 Sep 2016
While I love go2, I’m so hoping for rob papen to make the opposite for the Re platform
Go2 (as said in one of his live streams) is geared towards ease of use and simple/effective sound generation
I still hope he makes something that gets close to the depth of blue 2 inside of the rack extension world
He could make use of the custom display method, like vibro or spectra and have the wave shaper curve sit inside there while other parts of the synth could be panels like in Thor or go2 with the arp/matrix
The Re platform has grown a bit since recent years
Cheers for go2 an it’s easy unison sounds! I love it for starting song ideas as it’s one oscillator filter and mild effects, no clutter just creation and move forward
Go2 (as said in one of his live streams) is geared towards ease of use and simple/effective sound generation
I still hope he makes something that gets close to the depth of blue 2 inside of the rack extension world
He could make use of the custom display method, like vibro or spectra and have the wave shaper curve sit inside there while other parts of the synth could be panels like in Thor or go2 with the arp/matrix
The Re platform has grown a bit since recent years
Cheers for go2 an it’s easy unison sounds! I love it for starting song ideas as it’s one oscillator filter and mild effects, no clutter just creation and move forward
Mayor of plucktown
just trialed this today, what a nice synth !!!
-
- Information
-
Who is online
Users browsing this forum: No registered users and 32 guests