Softube Console 1 as MIDI controller for the SSL mixer
-
- Posts: 1
- Joined: 09 Nov 2016
Is this working on Reason 8 or only 9 ?
I can set it up as a controller, but it does not seem to function :/
I can set it up as a controller, but it does not seem to function :/
-
- Posts: 1906
- Joined: 15 Jan 2016
- Location: Vienna, Austria
It works with Reason 8 and 9. You need to select the track in the sequencer.bdhender wrote:Is this working on Reason 8 or only 9 ?
I can set it up as a controller, but it does not seem to function :/
Selecting a track in the mixer doesn't work. Hope this helps...
-
- Posts: 873
- Joined: 21 Jan 2015
You can use the track buttons as track selectors easily though. They should be added as buttons in the lua file and as bank switches in the remotemap. Then each tracks parameters is assigned to a sepcific bank. Alot of copy paste replace though. Just lookup some codecs where banks are being used.Ahornberg wrote:Thank you! The real difference on using Console 1 in Reason compared to the VST world is that I can't use the track select buttons on Console 1 to change the track. Instead I use the mouse. Another difference is that the automatic switch between coarse and fine resolution of the knobs don't work in Reason. Maybe both differences could be addressed by more sophisticated Lua programming ... but for now it's time to make musicQVprod wrote:Nice, congrats!Ahornberg wrote:Yes, the visual feedback on the controller works.QVprod wrote:Impressive! Especially if it also give you the feedback on the controller the same way the Console 1 software does. I'd feel weird relegating this as a Reason controller for it's price though, but I guess it saves you from needing to buy Softube's 9000k emulation.Ahornberg wrote:Here's my final remotemap for Console 1
-
- Posts: 1906
- Joined: 15 Jan 2016
- Location: Vienna, Austria
Yes, feel free to extend my mapping!electrofux wrote:You can use the track buttons as track selectors easily though. They should be added as buttons in the lua file and as bank switches in the remotemap. Then each tracks parameters is assigned to a sepcific bank. Alot of copy paste replace though. Just lookup some codecs where banks are being used.Ahornberg wrote:Thank you! The real difference on using Console 1 in Reason compared to the VST world is that I can't use the track select buttons on Console 1 to change the track. Instead I use the mouse. Another difference is that the automatic switch between coarse and fine resolution of the knobs don't work in Reason. Maybe both differences could be addressed by more sophisticated Lua programming ... but for now it's time to make musicQVprod wrote:Nice, congrats!Ahornberg wrote:Yes, the visual feedback on the controller works.QVprod wrote:Impressive! Especially if it also give you the feedback on the controller the same way the Console 1 software does. I'd feel weird relegating this as a Reason controller for it's price though, but I guess it saves you from needing to buy Softube's 9000k emulation.Ahornberg wrote:Here's my final remotemap for Console 1
-
- Posts: 873
- Joined: 21 Jan 2015
What are the track knobs sending (shifted/unshifted)? I dont have a console 1.
-
- Posts: 1906
- Joined: 15 Jan 2016
- Location: Vienna, Austria
they are sending MIDI CC messages (0..127) in steps of 3electrofux wrote:What are the track knobs sending (shifted/unshifted)? I dont have a console 1.
by pressing the shift-button while turning a knob it sends in steps of 1
-
- Posts: 338
- Joined: 17 Jan 2015
So now we are at a new point in this thread
Did someone test the console 1 VST implementation with Reason 9.5 beta?
Did someone test the console 1 VST implementation with Reason 9.5 beta?
-
- Posts: 4
- Joined: 02 Apr 2017
Mhh, but it has to work. For eample at 'Push' does it work this way too (
can't we just take that part of the push Mapping and integrate it into your nice Mapping-Patch?
Greetings from Germany!
(oh, em, I'm talking about the Track Fourth Back)
can't we just take that part of the push Mapping and integrate it into your nice Mapping-Patch?
Greetings from Germany!
(oh, em, I'm talking about the Track Fourth Back)
-
- Posts: 2037
- Joined: 26 Jan 2015
On vacation, or id be on it!
My plan was Reason 1st.... then load into Logic for VST use...
I really didn't want to commit to Logic
but, now....
I hope.
Big up from JamDown.
My plan was Reason 1st.... then load into Logic for VST use...
I really didn't want to commit to Logic
but, now....
I hope.
Big up from JamDown.
friday wrote:So now we are at a new point in this thread
Did someone test the console 1 VST implementation with Reason 9.5 beta?
-
- Posts: 27
- Joined: 30 Apr 2016
Yes you can!Ahornberg wrote:I think with a Behringer BCR 2000 you can do pretty much the same in Reason.normen wrote:Cool, I wish they'd sell it without the plugins
I'm testing a custom remote map for the BCR2000 I've found online with its own custom layout and it works wonderfully. And it has feedback for al, l even the compressor GR meter
Enviado desde mi iPhone utilizando Tapatalk
-
- Posts: 243
- Joined: 27 Jan 2015
Are you still using Console 1?
-
- Posts: 1906
- Joined: 15 Jan 2016
- Location: Vienna, Austria
yes ... much more fun than tweaking knobs on the Reason mixer with the mouse.
-
- Posts: 243
- Joined: 27 Jan 2015
Need to double check the workflow.
With your latest mapping can you still choose a track in the sequencer and the Console 1 will edit the channel belonging to tha chosen sequencer track?
-
- Posts: 243
- Joined: 27 Jan 2015
This is also nice, discontinued product... bummer.geremix wrote: ↑24 Aug 2017Yes you can!Ahornberg wrote:
I think with a Behringer BCR 2000 you can do pretty much the same in Reason.
I'm testing a custom remote map for the BCR2000 I've found online with its own custom layout and it works wonderfully. And it has feedback for al, l even the compressor GR meter
Enviado desde mi iPhone utilizando Tapatalk
-
- Posts: 1906
- Joined: 15 Jan 2016
- Location: Vienna, Austria
I usually choose the track/mixer-channel in the rack but it works too in the sequencer. Secletion means the little grey arrow must appear in the sequencer and left from the device in the rack. Selecting a track is doen by mouse not by the buttons on Console 1.
-
- Posts: 243
- Joined: 27 Jan 2015
Excellent that´s how I like to work. Currently i am using a nanoKONTROL2 and I select the tracks in the sequencer.
Looks like I have to spend some bucks.
-
- Posts: 1906
- Joined: 15 Jan 2016
- Location: Vienna, Austria
Keep in mind Console 1 is a hardware+software bundle.
If you only need a controller, maybe there are cheaper solutions.
If you already own Console 1 (as that was in my case), why not use it in Reason.
-
- Posts: 243
- Joined: 27 Jan 2015
Nektar Panorama P1 could be a solution but I don´t like the workflow of the Panorama, too much menue jumping.
Console 1 seems to be the perfect solution for me needs. Or a BCR2000...
-
- Posts: 51
- Joined: 27 May 2017
So, what are the latest directions for this codec? It mentions to copy the files to certain folders but it doesn't look like a "Remote" folder exists anymore unless I'm missing it. Any updates for installation with Reason 10?Ahornberg wrote: ↑20 Feb 2016I made some changes to my codec and remotemap.
The biggest one is that I mapped both buttons of the compressor (peak and fast) to the attack knob.
So all 4 possible combinations of these 2 buttons are now on one knob and so actually one knob is unused.
To get this done I signed up as a developer at PH to get the documentation for remotemaps and codecs.
The input meter display I routed to the FX in and FX out meters of the channel strip.
So I can switch the insert before dynamics and eq to get an input gain level on the controller.
Feel free to download and use the codec and remotemap.
Thanks ahead of time.
-JP
***If life is a song, I've just passed the guitar solo.***
-
- Posts: 1906
- Joined: 15 Jan 2016
- Location: Vienna, Austria
Sorry, I can't help you on Reason 10, I'm on 9.5jetpilot00 wrote: ↑09 Jun 2018So, what are the latest directions for this codec? It mentions to copy the files to certain folders but it doesn't look like a "Remote" folder exists anymore unless I'm missing it. Any updates for installation with Reason 10?Ahornberg wrote: ↑20 Feb 2016I made some changes to my codec and remotemap.
The biggest one is that I mapped both buttons of the compressor (peak and fast) to the attack knob.
So all 4 possible combinations of these 2 buttons are now on one knob and so actually one knob is unused.
To get this done I signed up as a developer at PH to get the documentation for remotemaps and codecs.
The input meter display I routed to the FX in and FX out meters of the channel strip.
So I can switch the insert before dynamics and eq to get an input gain level on the controller.
Feel free to download and use the codec and remotemap.
Thanks ahead of time.
-JP
-
- Posts: 201
- Joined: 29 Nov 2016
- Location: Denmark
If you're on Windows:jetpilot00 wrote: ↑09 Jun 2018So, what are the latest directions for this codec? It mentions to copy the files to certain folders but it doesn't look like a "Remote" folder exists anymore unless I'm missing it. Any updates for installation with Reason 10?Ahornberg wrote: ↑20 Feb 2016I made some changes to my codec and remotemap.
The biggest one is that I mapped both buttons of the compressor (peak and fast) to the attack knob.
So all 4 possible combinations of these 2 buttons are now on one knob and so actually one knob is unused.
To get this done I signed up as a developer at PH to get the documentation for remotemaps and codecs.
The input meter display I routed to the FX in and FX out meters of the channel strip.
So I can switch the insert before dynamics and eq to get an input gain level on the controller.
Feel free to download and use the codec and remotemap.
Thanks ahead of time.
-JP
I have my Reason installed on C:, the path to my Remote folder looks like this:
C:\ProgramData\Propellerhead Software\Remote
- make sure you can see hidden files and folders in Windows Explorer.
-
- Posts: 1906
- Joined: 15 Jan 2016
- Location: Vienna, Austria
I installed my files to C:\Users\[username]\AppData\Roaming\Propellerhead Software\Remote
-
- Posts: 51
- Joined: 27 May 2017
As it turns out, I actually like the sound / functionality of the Console 1 more as an insert in Reason than I do as a mixer control as it looks like I won't use the built in mixer features. Your codec works perfectly fine and thank you for your time.
Man, I hope they can get Console 1 functionality like they have in Studio One soon. Even with it's current usability, my UAD plugins work perfectly fine when loaded within the Console 1 world.
-JP
Man, I hope they can get Console 1 functionality like they have in Studio One soon. Even with it's current usability, my UAD plugins work perfectly fine when loaded within the Console 1 world.
-JP
***If life is a song, I've just passed the guitar solo.***
-
- Posts: 584
- Joined: 28 Sep 2015
I have a couple of questions about using Console 1 in Reason.
I have it, and it's really excellent to be able to mix hands on. So far I have only used it as intended: to control the vst insert effects on each channel. I can see the wider possibilities, so I'm wondering:
1. When you install console 1 as a control surface in Reason (i.e. with the custom mapping in this thread), can you still use as an insert effect in the intended way? How does it switch between the two?
I'm looking forward to diving into this but I don't want to break anything and cause trouble for the way console 1 is working right now!!
2. I'm wondering whether a simplified version of the custom mapping might be possible, for example:
Keep most things within console one but have console 1 control volume and pan on Reason's mixer?
I have it, and it's really excellent to be able to mix hands on. So far I have only used it as intended: to control the vst insert effects on each channel. I can see the wider possibilities, so I'm wondering:
1. When you install console 1 as a control surface in Reason (i.e. with the custom mapping in this thread), can you still use as an insert effect in the intended way? How does it switch between the two?
I'm looking forward to diving into this but I don't want to break anything and cause trouble for the way console 1 is working right now!!
2. I'm wondering whether a simplified version of the custom mapping might be possible, for example:
Keep most things within console one but have console 1 control volume and pan on Reason's mixer?
https://onetrackperweek.com
One year - 52 tracks - Electronic Dance Music
One year - 52 tracks - Electronic Dance Music
-
- Information
-
Who is online
Users browsing this forum: No registered users and 1 guest