Remotemap for Behringer BCR2000
-
- Posts: 33
- Joined: 21 Jun 2016
I can't view the link of supported RE's unfortunately
Are any of Lectric Panda's RE's supported? primarily the PSQ1684?
Are any of Lectric Panda's RE's supported? primarily the PSQ1684?
-
- Posts: 864
- Joined: 21 Jan 2015
Can we actually find the codec file in the Reason Installation somewhere?
This thread is about a replacement remotemap. The codec itself is (on windows) in the install directory with the Reason program as one of the old legacy encrypted codecs.electrofux wrote:Can we actually find the codec file in the Reason Installation somewhere?
If you ain't hip to the rare Housequake, shut up already.
Damn.
Damn.
-
- Posts: 864
- Joined: 21 Jan 2015
There you go, found it, thx. But looks like it is encrypted :/Catblack wrote:This thread is about a replacement remotemap. The codec itself is (on windows) in the install directory with the Reason program as one of the old legacy encrypted codecs.electrofux wrote:Can we actually find the codec file in the Reason Installation somewhere?
That's what makes this Remotemap so amazing to me; that Oenkenstein has managed to extend the default one as far as he has.electrofux wrote:There you go, found it, thx. But looks like it is encrypted :/Catblack wrote:This thread is about a replacement remotemap. The codec itself is (on windows) in the install directory with the Reason program as one of the old legacy encrypted codecs.electrofux wrote:Can we actually find the codec file in the Reason Installation somewhere?
I suppose one could decode the sysex that the encrypted codec sends the device. There's a yahoo group for the bcr2000 which has an amazing amount of reverse engineered documentation on it. But this works pretty well -- which is why I'm working on getting the rest of the devices into it.
If you ain't hip to the rare Housequake, shut up already.
Damn.
Damn.
-
- Posts: 33
- Joined: 21 Jun 2016
Hello
Thanks for you for sharing the remote map
The file does not exist anymore in the link
Is is possible to reupload?
I would be very grateful
Thankyou
Thanks for you for sharing the remote map
The file does not exist anymore in the link
Is is possible to reupload?
I would be very grateful
Thankyou
- Oenkenstein
- RE Developer
- Posts: 838
- Joined: 17 Jan 2015
In the first post in this thread, I have changed the links to the list of supported Rack Extensions and the link to the .zip file, which contains the BCR2000.remotemap.dallasknight wrote:Hello
Thanks for you for sharing the remote map
The file does not exist anymore in the link
Is is possible to reupload?
I would be very grateful
Thankyou
Or: Download .zip file: http://www.oenkenstein.nl/uploadmap/BCR2000.zip
Last edited by Oenkenstein on 14 Aug 2017, edited 1 time in total.
-
- Posts: 33
- Joined: 21 Jun 2016
That's great, thanks so much for this!Oenkenstein wrote:In the first post in this thread, I have changed the links to the list of supported Rack Extensions and the link to the .zip file, which contains the BCR2000.remotemap.dallasknight wrote:Hello
Thanks for you for sharing the remote map
The file does not exist anymore in the link
Is is possible to reupload?
I would be very grateful
Thankyou
Or: Download .zip file: https://www.dropbox.com/s/bcj54vh23nwys ... 0.zip?dl=0
You might get a message from the Dropbox website that 'this .zip file can not be previewed', but after a few seconds a 'Download' button will appear.
- theshoemaker
- Posts: 595
- Joined: 21 Nov 2015
- Location: Germany
- Contact:
On MacOS you can use the User directory, which is "~/Library/" ... same as given in the first post, for user generated content.
latest V12 on MacOS Ventura
The Legend from Synapse is not remote mapping on my system. It used to work back in June but when arriving back from holidays it no longer maps to the BCR.
I know the .remotemap is in effect because my Orbis synth works OK. All the stock devices also seem to work fine.
Can anyone check if their Legend is correctly remote mapping to the BCR2000?
I know the .remotemap is in effect because my Orbis synth works OK. All the stock devices also seem to work fine.
Can anyone check if their Legend is correctly remote mapping to the BCR2000?
First check the manufacturer name in the remotemap file. Depending on your version of Legend it should either be
"Synapse Audio" or "Synapse Audio Software". I was under the impression that they changed the name at a certain version of the RE.
so
or
Now, with Reason 9.5 you can easily see which manufacturer name is used by a RE by exporting the Remotable Items with "Export Device Remote Info"
"Synapse Audio" or "Synapse Audio Software". I was under the impression that they changed the name at a certain version of the RE.
so
Code: Select all
Scope Synapse Audio com.synapseAudioSoftware.Legend
Code: Select all
Scope Synapse Audio Software com.synapseAudioSoftware.Legend
Hi, this is great work and I'll like to invite you to share it on my new www.reasonremoter.uk site. My aim is to get remote authors and reason users together to share great midi control maps. It's all free, many thanks
Could not download from your site. Getting a forbidden error.djsmex wrote: ↑04 Aug 2017Hi, this is great work and I'll like to invite you to share it on my new www.reasonremoter.uk site. My aim is to get remote authors and reason users together to share great midi control maps. It's all free, many thanks
If you ain't hip to the rare Housequake, shut up already.
Damn.
Damn.
- ReasonUser
- Posts: 149
- Joined: 24 Feb 2015
Oenkenstein - I've yet to buy the bcr2000, but it's next on my list. Is your SSL map similar to the one mentioned in this blog?Oenkenstein wrote: ↑15 May 2017
In the first post in this thread, I have changed the links to the list of supported Rack Extensions and the link to the .zip file, which contains the BCR2000.remotemap.
Or: Download .zip file: https://www.dropbox.com/s/bcj54vh23nwys ... 0.zip?dl=0
You might get a message from the Dropbox website that 'this .zip file can not be previewed', but after a few seconds a 'Download' button will appear.
http://www.jaexx.com/blog/reason-using- ... nel-strip/
Also, that bcr2000_front.jpg image where you showed the functionality has since disappeared. Do you still have that?
Thanks
- Oenkenstein
- RE Developer
- Posts: 838
- Joined: 17 Jan 2015
The BCR2000 remote map does not contain the mapping as described in the great article on jaexx.com. It uses the default mapping done by the Props. I have reposted the missing picture as requested in the original post on page 1 of this thread. It got lost due to server changes at Dropbox.ReasonUser wrote: ↑09 Aug 2017Oenkenstein - I've yet to buy the bcr2000, but it's next on my list. Is your SSL map similar to the one mentioned in this blog?Oenkenstein wrote: ↑15 May 2017
In the first post in this thread, I have changed the links to the list of supported Rack Extensions and the link to the .zip file, which contains the BCR2000.remotemap.
Or: Download .zip file: http://www.oenkenstein.nl/uploadmap/BCR2000.zip
http://www.jaexx.com/blog/reason-using- ... nel-strip/
Also, that bcr2000_front.jpg image where you showed the functionality has since disappeared. Do you still have that?
Thanks
Last edited by Oenkenstein on 14 Aug 2017, edited 1 time in total.
- ReasonUser
- Posts: 149
- Joined: 24 Feb 2015
Wow - Any reason why someone wouldn't add MJ's SSL layout to your remote map? I guess you lose the transport controls, and the patch +/- buttons, but you gain complete control of the SSL for each channel.Oenkenstein wrote: ↑09 Aug 2017
The BCR2000 remote map does not contain the mapping as described in the great article on jaexx.com. It uses the default mapping done by the Props. I have reposted the missing picture as requested in the original post on page 1 of this thread. It got lost due to server changes at Dropbox.
Will all of your remote maps still work as intended if I added MJ's SSL functionality in?
- Oenkenstein
- RE Developer
- Posts: 838
- Joined: 17 Jan 2015
His mapping is not implemented, because the BCR2000 remote map is made to support solely Rack Extensions.
I have not tested whether my remote map is still working when MJ's SSL mixer layout is implemented, but think it would not corrupt anything. It is a bit cumbersome process, but you can make two remote maps for the BCR2000 and swap them prior starting Reason, just to be sure.
I have not tested whether my remote map is still working when MJ's SSL mixer layout is implemented, but think it would not corrupt anything. It is a bit cumbersome process, but you can make two remote maps for the BCR2000 and swap them prior starting Reason, just to be sure.
ReasonUser wrote: ↑10 Aug 2017Wow - Any reason why someone wouldn't add MJ's SSL layout to your remote map? I guess you lose the transport controls, and the patch +/- buttons, but you gain complete control of the SSL for each channel.Oenkenstein wrote: ↑09 Aug 2017
The BCR2000 remote map does not contain the mapping as described in the great article on jaexx.com. It uses the default mapping done by the Props. I have reposted the missing picture as requested in the original post on page 1 of this thread. It got lost due to server changes at Dropbox.
Will all of your remote maps still work as intended if I added MJ's SSL functionality in?
- ReasonUser
- Posts: 149
- Joined: 24 Feb 2015
Interesting. I thought all core devices (like subtractor) were also fully mapped. But perhaps I don't fully understand how remote maps work. Anyway, I've ordered the bcr2000 and I'm expecting it this week.Oenkenstein wrote: ↑11 Aug 2017His mapping is not implemented, because the BCR2000 remote map is made to support solely Rack Extensions.
I have not tested whether my remote map is still working when MJ's SSL mixer layout is implemented, but think it would not corrupt anything. It is a bit cumbersome process, but you can make two remote maps for the BCR2000 and swap them prior starting Reason, just to be sure.
I see propellerheads have done their own mapping for core devices. But are they configured well? Can I override them to my taste and still switch between tracks/devices? Guess I'll find out soon enough!
- Oenkenstein
- RE Developer
- Posts: 838
- Joined: 17 Jan 2015
Great job on sharing remote maps. Are there any steps for me to perform to participate and add the Behringer BCR2000 remote map? Or do you already have all the files and information needed?djsmex wrote: ↑04 Aug 2017Hi, this is great work and I'll like to invite you to share it on my new www.reasonremoter.uk site. My aim is to get remote authors and reason users together to share great midi control maps. It's all free, many thanks
Cheers!
- Oenkenstein
- RE Developer
- Posts: 838
- Joined: 17 Jan 2015
First make sure your BCR2000 is updated to firmware version 1.10 and is assigned as a control surface in the Control Surfaces tab of the Preferences.Edin_16 wrote: ↑12 Aug 2017Hello Guys,
thanks for your work! Since today I own a BCR200, too and I can map inside reason every parameter without problems. The thing is, instruments like subtractor or predator have more knobs than the bcr2000. I need to change the preset to map 2 or more functions on one knob of the bcr2000
Problem: I ONLY can change Presets when reason is not running. The moment reason starts the preset get stucked in the one which is choosen before I start reason. I downloaded the map but I cant change the Presets when reason starts, too. What should I do to have the ability to change this presets on my bcr2000 in reason when it is running?
When is the controller is not listed, do not perform an Autodetect surfaces, but add the BCR2000 by hand:
1. Press on Add.
2. Choose Behringer as manufacturer and set the Model to BCR2000.
3. Click on Find and move an item on the BCR2000 and click on Choose.
4. Set the MIDI Out port to BCR2000 and click on OK.
Download the BCR2000 remote map and follow the instructions as described in the first post of this thread. Now you can control all Reason native devices and all the Rack Extensions mentioned in the BCR2000 remote map list.
When you want to assign a rotary or a button on a native device not covered by the default mapping Props gave us, you can use Edit Remote Override Mapping. The mapping will then be stored in the Reason song or template. To make a mapping permanent and independent from a Reason song, you will have to change the mapping in the BCR2000.remotemap.
- Oenkenstein
- RE Developer
- Posts: 838
- Joined: 17 Jan 2015
Cool. Congrats on purchasing the BCR2000! Yes, all native devices in Reason are also supported in the BCR2000 remote map, but some devices are not fully mapped, like the Subtractor. To add or change controllable items you can rely on Remote Override. In my opinion Props has done a great job assigning knobs and buttons to their default remote map, even for the SSL mixer. It just takes some effort to memorize which rotary or button does what.ReasonUser wrote: ↑12 Aug 2017Interesting. I thought all core devices (like subtractor) were also fully mapped. But perhaps I don't fully understand how remote maps work. Anyway, I've ordered the bcr2000 and I'm expecting it this week.Oenkenstein wrote: ↑11 Aug 2017His mapping is not implemented, because the BCR2000 remote map is made to support solely Rack Extensions.
I have not tested whether my remote map is still working when MJ's SSL mixer layout is implemented, but think it would not corrupt anything. It is a bit cumbersome process, but you can make two remote maps for the BCR2000 and swap them prior starting Reason, just to be sure.
I see propellerheads have done their own mapping for core devices. But are they configured well? Can I override them to my taste and still switch between tracks/devices? Guess I'll find out soon enough!
- Oenkenstein
- RE Developer
- Posts: 838
- Joined: 17 Jan 2015
To answer a post from Feb. 2017. The following RE''s from Panda are supported:
Lectric Panda LLC Fritz Granular Engine
Lectric Panda LLC Janitor CV Shaper
Lectric Panda LLC Scope Signal Monitor
Lectric Panda LLC Shape LFO Editor
Lectric Panda LLC Spektrum Signal Monitor
The PSQ1684 sequencer is not supported. Yet.
I have been neglecting this thread for a long time. Due to illness and being very to busy developing Rack Extensions. I hope to find some spare time again and update the remote map with Rack Extensions released after January, 5th, 2017. I have updated some links in a few posts today. Kuddos to Catblack and Artotaku for providing info and keeping this thread alive.
Lectric Panda LLC Fritz Granular Engine
Lectric Panda LLC Janitor CV Shaper
Lectric Panda LLC Scope Signal Monitor
Lectric Panda LLC Shape LFO Editor
Lectric Panda LLC Spektrum Signal Monitor
The PSQ1684 sequencer is not supported. Yet.
I have been neglecting this thread for a long time. Due to illness and being very to busy developing Rack Extensions. I hope to find some spare time again and update the remote map with Rack Extensions released after January, 5th, 2017. I have updated some links in a few posts today. Kuddos to Catblack and Artotaku for providing info and keeping this thread alive.
All fixed now, thanks for letting us know.Catblack wrote: ↑05 Aug 2017Could not download from your site. Getting a forbidden error.djsmex wrote: ↑04 Aug 2017Hi, this is great work and I'll like to invite you to share it on my new www.reasonremoter.uk site. My aim is to get remote authors and reason users together to share great midi control maps. It's all free, many thanks
Hi, you can join the site for free as a author and post your remote files so they will appear in the downloads/shop or I can add the link you've posted here on the free resources section of the downloads page. Happy either way, just let us know.Oenkenstein wrote: ↑14 Aug 2017Great job on sharing remote maps. Are there any steps for me to perform to participate and add the Behringer BCR2000 remote map? Or do you already have all the files and information needed?djsmex wrote: ↑04 Aug 2017Hi, this is great work and I'll like to invite you to share it on my new www.reasonremoter.uk site. My aim is to get remote authors and reason users together to share great midi control maps. It's all free, many thanks
Cheers!
best, John
-
- Information
-
Who is online
Users browsing this forum: No registered users and 18 guests