jappe wrote:It's like my tumble dryer... I can make a pair of gloves from the shit in the filter after a couple runs☺
Post a pic of your studio!
Thank you much, sir! Photography is the other "business"... By business I mean I do it for fun and sometimes people pay me for it, haha!Jagwah wrote:I used 3M hooks that stick on to a surface which in my case was the back of my desk panels, they can hold the weight so all the power boards and everything are suspended and out of sight, with no dust build up. It was well worth the effort!aburazaru wrote:P-clamps are cable management's best friends, y'all!
You take great pictures btw
aburazaru wrote:
How was I supposed to know "don't touch" meant to not push the big...red...button?
Current setup, still very much WIP... Got the Gennys (8330A) and the stands last week, already in love. I used to have a pair of 1029 and 8030 for a number of years, these are a cut above them and then some due to more power and the GLM DSP correction.
Also featured is our animal companion, Adele. She is a corgi/german shepherd mix, a rescue we got about a year ago. She is a total darling, hardly ever barks too.
Also featured is our animal companion, Adele. She is a corgi/german shepherd mix, a rescue we got about a year ago. She is a total darling, hardly ever barks too.
soundcloud.com/armsgrade
Something to be said about a QUALITY setup there (with a small footprint)! May I ask if you use the wacom tablet in audio stuff, or do you also do some graphic/photo work too?dhruan wrote:Current setup, still very much WIP... Got the Gennys (8330A) and the stands last week, already in love. I used to have a pair of 1029 and 8030 for a number of years, these are a cut above them and then some due to more power and the GLM DSP correction.
Also featured is our animal companion, Adele. She is a corgi/german shepherd mix, a rescue we got about a year ago. She is a total darling, hardly ever barks too.
How was I supposed to know "don't touch" meant to not push the big...red...button?
- Creativemind
- Posts: 4897
- Joined: 17 Jan 2015
- Location: Stoke-On-Trent, England, UK
Loving the full length SSL there buddyloopback wrote:Faeriesmount Studio:
Also called Aira-Land
Reason Studio's 11.3 / Cockos Reaper 6.82 / Cakewalk By Bandlab / Orion 8.6
http://soundcloud.com/creativemind75/iv ... soul-mix-3
- EnochLight
- Moderator
- Posts: 8412
- Joined: 17 Jan 2015
- Location: Imladris
Thanks!dagwood wrote:This is absolutely stunning; LOVE!!!! Where did you get the foam panels? I was looking at Auralex but they're super expensive.EnochLight wrote:Here's mine so far - just started a remodel about a year ago:
XOXOX
I picked up the panels from http://www.foambymail.com/ - they're about a 45 minute drive from my house so I was able to take a look at their panels before ordering them. The larger panels near the white light switch (to the right of my door) were actually in a clearance bin - for just $3 a panel! The rest I paid full price for, but that was still 80% cheaper than Auralex.
That said, it should be said that the quality of the panels from foambymail.com are not as nice as Auralex. The panels by Auralex are denser, whereas the panels by foambymail are lighter. Still, I couldn't justify the ridiculously expensive prices that Auralex charges, and the acoustic absorption wasn't much different (foambymail provides the measurements on their website for comparison).
I did learn some valuable lessons for mounting the foam panels on drywall, though. I wish I had painted all of my walls black before mounting them, as you can see some white seams between some panels. Also, 3M's Super77 does not work that great. I wish I had just liquid nailed the panels to my walls!
Win 10 | Ableton Live 11 Suite | Reason 12 | i7 3770k @ 3.5 Ghz | 16 GB RAM | RME Babyface Pro | Akai MPC Live 2 & Akai Force | Roland System 8, MX1, TB3 | Dreadbox Typhon | Korg Minilogue XD
Hi and thanks! I use the Wacom for general use as a big ass touchpad, also for visual & other design work, audio stuff too. I have used Wacom tablets since '97 or so (started my career as an AD & visual/UI/web designer), nowadays my work is mostly on the UX & Service Design side (User/Human Centered Design, working with people, doing research, running workshops etc.) but the habit of using a tablet has stuck with me. It is kind of a no-brainer for any kind of photo editing or visual/graphic stuff, also great for operating Reason.aburazaru wrote:Something to be said about a QUALITY setup there (with a small footprint)! May I ask if you use the wacom tablet in audio stuff, or do you also do some graphic/photo work too?
soundcloud.com/armsgrade
Now that's what I was after! First, that sounds cool! Second, are there any benefits/advantages to using the tablet in something like reason, or is it just a natural pref for you? Are you using it to manipulate specific instruments or controls, or using it the same way somebody like me would use a mouse (for all the stuff I can't really do easily in controllers)? I'm on the fence about grabbing a large tablet as I deal in photography as well so seeing what other functionality I can squeeze out of it, haha. Sorry for the game of 20 questions.dhruan wrote:Hi and thanks! I use the Wacom for general use as a big ass touchpad, also for visual & other design work, audio stuff too. I have used Wacom tablets since '97 or so (started my career as an AD & visual/UI/web designer), nowadays my work is mostly on the UX & Service Design side (User/Human Centered Design, working with people, doing research, running workshops etc.) but the habit of using a tablet has stuck with me. It is kind of a no-brainer for any kind of photo editing or visual/graphic stuff, also great for operating Reason.aburazaru wrote:Something to be said about a QUALITY setup there (with a small footprint)! May I ask if you use the wacom tablet in audio stuff, or do you also do some graphic/photo work too?
How was I supposed to know "don't touch" meant to not push the big...red...button?
Benefits... if you are running a setup with multiple monitors or a laptop and a monitor then yeah, it definitely makes controlling stuff easier with using the touch functionality or the pen (now that Wacom has gotten the touch part working better). Mine is a Wacom Intuos Pro M, it is more than adequate for me. Would not really want to go L unless my focus was drafting/CAD/mechanical engineering or digital painting, this thing is already quite big and the L one gets tricky to place (few industrial designers run those at work). This also relates to portability, you can stuff this one into a regular laptop bag with a 15" MBP, the L one... good luck with thataburazaru wrote:Now that's what I was after! First, that sounds cool! Second, are there any benefits/advantages to using the tablet in something like reason, or is it just a natural pref for you? Are you using it to manipulate specific instruments or controls, or using it the same way somebody like me would use a mouse (for all the stuff I can't really do easily in controllers)? I'm on the fence about grabbing a large tablet as I deal in photography as well so seeing what other functionality I can squeeze out of it, haha. Sorry for the game of 20 questions.
Other than that, natural preference, yeah, I do not especially dislike mice but anything that cuts down on repetition and awkward hand postures is a bonus. For graphics work a pen is pretty much essential, it saves time, is more precise and also has the added benefits of pressure and angle sensitivity. Used with Reason, well, it just works, like a big touchpad so I use that instead of a mouse. Using gestures, dragging devices or the view, manipulating controls, all works great and is much preferable to a mouse.
Actually, the only place where I would use a mouse nowadays is with games, keyboard and a mouse is so much better than anything else for running and gunning in a FPS (although I have gotten better with a console controller now that I "some hours" of DOOM on PS4 under my belt).
soundcloud.com/armsgrade
Yan
Thanks so much for this info! My b-friend is supposed to be building us a studio, so we will look at that website as a possible supplier.EnochLight wrote:Thanks!dagwood wrote:This is absolutely stunning; LOVE!!!! Where did you get the foam panels? I was looking at Auralex but they're super expensive.EnochLight wrote:Here's mine so far - just started a remodel about a year ago:
XOXOX
I picked up the panels from http://www.foambymail.com/ - they're about a 45 minute drive from my house so I was able to take a look at their panels before ordering them. The larger panels near the white light switch (to the right of my door) were actually in a clearance bin - for just $3 a panel! The rest I paid full price for, but that was still 80% cheaper than Auralex.
That said, it should be said that the quality of the panels from foambymail.com are not as nice as Auralex. The panels by Auralex are denser, whereas the panels by foambymail are lighter. Still, I couldn't justify the ridiculously expensive prices that Auralex charges, and the acoustic absorption wasn't much different (foambymail provides the measurements on their website for comparison).
I did learn some valuable lessons for mounting the foam panels on drywall, though. I wish I had painted all of my walls black before mounting them, as you can see some white seams between some panels. Also, 3M's Super77 does not work that great. I wish I had just liquid nailed the panels to my walls!
One thing I'd like to say about foam is: do not go overboard with it. Don't plaster your walls and ceiling with it. Most of the panels will only do a bit of hi cut on the acoustics of your room wich will dull your sound making it likely that you add too much high to your mix to compensate.
Acoustic treatment is a complex subject that doesn't get solved with a prefab "kit" of panels because every room, together with the way you set up your gear, is different.
Good acoustic treatment usually needs a good balance of trapping, absorbing and diffusion.
Make sure you try to get a bit of all of that and even then, don't cover all your walls.
I'd say visit gearsluts for the good threads on this subject and take your time.
Acoustic treatment is a complex subject that doesn't get solved with a prefab "kit" of panels because every room, together with the way you set up your gear, is different.
Good acoustic treatment usually needs a good balance of trapping, absorbing and diffusion.
Make sure you try to get a bit of all of that and even then, don't cover all your walls.
I'd say visit gearsluts for the good threads on this subject and take your time.
V9 | i7 5930 | Motu 828 MK3 | Win 10
- EnochLight
- Moderator
- Posts: 8412
- Joined: 17 Jan 2015
- Location: Imladris
eauhm wrote:One thing I'd like to say about foam is: do not go overboard with it. Don't plaster your walls and ceiling with it. Most of the panels will only do a bit of hi cut on the acoustics of your room wich will dull your sound making it likely that you add too much high to your mix to compensate.
Acoustic treatment is a complex subject that doesn't get solved with a prefab "kit" of panels because every room, together with the way you set up your gear.
Good acoustic treatment usually needs a good balance of trapping, absorbing and diffusion.
Make sure you try to get a bit of all of that and even then, don't cover all your walls.
Agreed!
I strongly urge anyone considering modifying their studio space to at least do one of Auralex's free room analysis services:
http://www.auralex.com/tools/roomanalysis/
There may be others out there, but this is the one I used.
Win 10 | Ableton Live 11 Suite | Reason 12 | i7 3770k @ 3.5 Ghz | 16 GB RAM | RME Babyface Pro | Akai MPC Live 2 & Akai Force | Roland System 8, MX1, TB3 | Dreadbox Typhon | Korg Minilogue XD
Auralex has nice products. And if your room measurements (not the ones you make with a tape measure, but the ones you make with either your ears or a measuring mic) tell you you need a bit of foam they have nice foam. But 40 cm deep foam basstraps.. If that would really work you'd see them in every high end studio.
The best room analysis can be done by learning what a room and it's acoustics does to your sound. What do reflections do. What are standing waves. What does absorption and deflection/diffusion do. What does a desk do to the sound from your speakers when you move your head. Where do I place my speakers.
Realise that most small rooms will have big problems (large rooms small problems). Once you know this, you know what problems treatment can fix, and you can stay alert to the effect of your room on your sound.
And take into consideration that auralex likes to sell products, and then decide what your room needs.
The best room analysis can be done by learning what a room and it's acoustics does to your sound. What do reflections do. What are standing waves. What does absorption and deflection/diffusion do. What does a desk do to the sound from your speakers when you move your head. Where do I place my speakers.
Realise that most small rooms will have big problems (large rooms small problems). Once you know this, you know what problems treatment can fix, and you can stay alert to the effect of your room on your sound.
And take into consideration that auralex likes to sell products, and then decide what your room needs.
V9 | i7 5930 | Motu 828 MK3 | Win 10
There IS great acoustic foam on the market for about 8 years now though - its called Basotect. I have 50cm x 2m triangle bass traps in my corners and up on the walls now and they work like crazy. The room isn't big and I had issues at around 120/60Hz - they're gone.eauhm wrote:Auralex has nice products. And if your room measurements tell you you need a bit of foam they have nice foam. But 40 cm deep foam basstraps.. If that would really work you'd see them in every high end studio.
The best room analysis can be done by learning what a room and it's acoustics does to your sound. What do reflections do. What are standing waves. What does absorption and deflection/diffusion do. What does a desk do to the sound from your speakers when you move your head. Where do I place my speakers.
Realise that most small rooms will have big problems (large rooms small problems). Once you know this, you know what problems treatment can fix, and you can stay alert to the effect of your room on your sound.
And take into consideration that auralex likes to sell products, and then decide what your room needs.
See my post here:
https://www.reasontalk.com/viewtopic.ph ... 8&p=272930
I am in the process of setting up my new home/project studio atm. I'll post here when I'm done
Thats cool to see, although im not convinced by the graphs. My ears might convince me though Also, 50 cm is a lot more then 35 some traps have.
I'm curious to try them out though. I could really use some better bass trapping.
I'm curious to try them out though. I could really use some better bass trapping.
V9 | i7 5930 | Motu 828 MK3 | Win 10
That does help but..normen wrote:This is a german company, the graphs are correcteauhm wrote:Thats cool to see, although im not convinced by the graphs.
If i see the purple line ending at 0.05 absorption for 100hz.. Then I'm much more inclined to believe your ears when you say it worked wonders for your room as opposed to going by the numbers on that graph. Because to me they don't look that great.
V9 | i7 5930 | Motu 828 MK3 | Win 10
- EnochLight
- Moderator
- Posts: 8412
- Joined: 17 Jan 2015
- Location: Imladris
I suppose the graphs Volkswagen used were defective.normen wrote:This is a german company, the graphs are correcteauhm wrote:Thats cool to see, although im not convinced by the graphs.
Win 10 | Ableton Live 11 Suite | Reason 12 | i7 3770k @ 3.5 Ghz | 16 GB RAM | RME Babyface Pro | Akai MPC Live 2 & Akai Force | Roland System 8, MX1, TB3 | Dreadbox Typhon | Korg Minilogue XD
- EnochLight
- Moderator
- Posts: 8412
- Joined: 17 Jan 2015
- Location: Imladris
Their room measurement services (at least the free ones) are pretty decent for small rooms. But I would never buy their overpriced foam (which is why I went with a local manufacturer at 1/5 the cost).eauhm wrote: And take into consideration that auralex likes to sell products, and then decide what your room needs.
Win 10 | Ableton Live 11 Suite | Reason 12 | i7 3770k @ 3.5 Ghz | 16 GB RAM | RME Babyface Pro | Akai MPC Live 2 & Akai Force | Roland System 8, MX1, TB3 | Dreadbox Typhon | Korg Minilogue XD
From what I gather here most already know what they are getting themselves into. On the other hand, many people are easily tempted by cool looking walls with nice patterns of multicolored foam. That's what my "PSA" was about
V9 | i7 5930 | Motu 828 MK3 | Win 10
Read the bottom. This is for 10cm wall absorbers. The triangles are 50cm at the cathetus "Normal" foam of 10cm thickness doesn't do much at all in these low/mid frequency areas. Anyway, didn't want to derail the topic, sry.eauhm wrote:That does help but..
If i see the purple line ending at 0.05 absorption for 100hz.. Then I'm much more inclined to believe your ears when you say it worked wonders for your room as opposed to going by the numbers on that graph. Because to me they don't look that great.
Good point, my apologies because I started it :S thanks for your info though! Back to perrty pictures !normen wrote:Read the bottom. This is for 10cm wall absorbers. The triangles are 50cm at the cathetus "Normal" foam of 10cm thickness doesn't do much at all in these low/mid frequency areas. Anyway, didn't want to derail the topic, sry.eauhm wrote:That does help but..
If i see the purple line ending at 0.05 absorption for 100hz.. Then I'm much more inclined to believe your ears when you say it worked wonders for your room as opposed to going by the numbers on that graph. Because to me they don't look that great.
V9 | i7 5930 | Motu 828 MK3 | Win 10
Thought I would join in the fun
• The System 1 is for synth control and keys.
• The Spark LE is for Redrum control and programming.
• The VCM600 is mixer control.
• The Traktor F1 is used for sequencer control (either Matrixes or latching the main sequencer on and off using Note Receive).
• The DJ controller isn't used for production, but it is good to use the EQs / filters or to mix into another song (good for checking mixes).
• The System 1 is for synth control and keys.
• The Spark LE is for Redrum control and programming.
• The VCM600 is mixer control.
• The Traktor F1 is used for sequencer control (either Matrixes or latching the main sequencer on and off using Note Receive).
• The DJ controller isn't used for production, but it is good to use the EQs / filters or to mix into another song (good for checking mixes).
-
- Information
-
Who is online
Users browsing this forum: No registered users and 6 guests