Some instruments have built in limiters. You should submit a support ticket at reasonstudios.com and tell them the problem you had and request a feature to include a built in limiter in a future version of Objekt. The 3 Maia rack extensions for Reason have limiters built in. Hopefully they can add the feature!fieldframe wrote: ↑14 May 2023Think I found a bug (a rather unpleasant one resulting in sudden, high-frequency volume spikes). Where should I send it?
Objekt has arrived!
-
- Posts: 5
- Joined: 30 Dec 2018
Last edited by xs23t7x on 14 May 2023, edited 1 time in total.
-
- Posts: 1228
- Joined: 15 Jan 2015
- Location: Sunnyvale, CA
I'm getting sudden mid frequency volume spikes. So far I compensate by reducing the general volume, but that takes away the general impact.
-
- Posts: 1556
- Joined: 18 Jan 2015
Wow, from the splendid videos, this synth was so much more than I had expected. Feel Objektifed. 
-
- Reason Studios
- Posts: 480
- Joined: 16 Jan 2015
Do send us a report including a patch if you get very harsh feedback. That said, Objekt can feedback in general since physical modeling algorithms is mostly feedback. It's very dependent on the parameters and is especially likely if there's a lot of resonance at the same frequencies, for example when routing one resonator into another.
The most common cause is when using Dispersion Mod. Bringing down Dispersion Mod and/or Decay generally solves it, and a bit of Pitch Mod can also help combat this. There's more info about that in the manual.
A real pro-tip is routing the Object Envelope Follower source to Decay with a negative amount, then if it feedbacks a lot it pulls down the Decay so it stops feeding back.
The most common cause is when using Dispersion Mod. Bringing down Dispersion Mod and/or Decay generally solves it, and a bit of Pitch Mod can also help combat this. There's more info about that in the manual.
A real pro-tip is routing the Object Envelope Follower source to Decay with a negative amount, then if it feedbacks a lot it pulls down the Decay so it stops feeding back.
-
- Moderator
- Posts: 4344
- Joined: 17 Jan 2015
- Location: Fanboy Shill
Not sure what I did exactly. I was tweaking the dials of one of Objekt's patches (Foreign Shores) and added the Noise Pulse exciter (and tweaked the knobs a bit). And this is the result. I just love the sound of that exciter! Wow! So cool.
First 13 seconds of the video is without the noise pulse, the rest of the video is with it.
First 13 seconds of the video is without the noise pulse, the rest of the video is with it.
-
- Competition Winner
- Posts: 3710
- Joined: 16 Jan 2015
It sounds pretty organic.challism wrote: ↑15 May 2023Not sure what I did exactly. I was tweaking the dials of one of Objekt's patches (Foreign Shores) and added the Noise Pulse exciter (and tweaked the knobs a bit). And this is the result. I just love the sound of that exciter! Wow! So cool.
First 13 seconds of the video is without the noise pulse, the rest of the video is with it.
What I like about Objekt is that the patches are rich, textured and playable at the same time.
---
-
- RE Developer
- Posts: 1050
- Joined: 03 Jan 2019
A few quick sound sketches. Trying to show the kind of sonic range that Objekt has.
It's absolutely incredible, you have similar capabilities to Thor, but from only 1 "oscillator type", with arguably even more movement in between.
The sketch sounds were made with 1 instance of Objekt and 1 instance of LaunchEon for the random modulations.
It's absolutely incredible, you have similar capabilities to Thor, but from only 1 "oscillator type", with arguably even more movement in between.
The sketch sounds were made with 1 instance of Objekt and 1 instance of LaunchEon for the random modulations.
-
- Posts: 8
- Joined: 19 Sep 2021
If I wanted to put an Objekt patch through an amplitude envelope (ASDR), how could I do that? I feel there's an obvious answer but my brain isn't being obvious.
-
- Competition Winner
- Posts: 966
- Joined: 08 Jul 2020
- Location: Dubai / Cape Town
Bring down the exciter impact and use the exciter noise insteadmartinez71 wrote: ↑15 May 2023If I wanted to put an Objekt patch through an amplitude envelope (ASDR), how could I do that? I feel there's an obvious answer but my brain isn't being obvious.
Get more Combinators at the deeplink website
-
- RE Developer
- Posts: 1050
- Joined: 03 Jan 2019
Yeah, this, or alternatively you can use an envelope generator on the gain/volume. There's multiple ways to do this, but Thor and Europa give you the most flexibility, I would think.deeplink wrote: ↑15 May 2023Bring down the exciter impact and use the exciter noise insteadmartinez71 wrote: ↑15 May 2023If I wanted to put an Objekt patch through an amplitude envelope (ASDR), how could I do that? I feel there's an obvious answer but my brain isn't being obvious.
-
- Posts: 8
- Joined: 19 Sep 2021
I was just trying with Thor, but I couldn't get it to work. Could somebody explain in simple terms?
Audio outputs of Objekt into Audio inputs of Thor.
In the Thor matrix:
Source = Audio Inputs 1 and 2
It's what to do next, with Amount, Destination, Amount and Scale, that I'm struggling with.
Thanks!
Audio outputs of Objekt into Audio inputs of Thor.
In the Thor matrix:
Source = Audio Inputs 1 and 2
It's what to do next, with Amount, Destination, Amount and Scale, that I'm struggling with.
Thanks!
-
- RE Developer
- Posts: 1050
- Joined: 03 Jan 2019
nah, nah, nah...martinez71 wrote: ↑15 May 2023I was just trying with Thor, but I couldn't get it to work. Could somebody explain in simple terms?
Audio outputs of Objekt into Audio inputs of Thor.
In the Thor matrix:
Source = Audio Inputs 1 and 2
It's what to do next, with Amount, Destination, Amount and Scale, that I'm struggling with.
Thanks!
You want to use CV to control a vol/gain somewhere in the path, this is a basic example:
Add a Thor, a 14:2 mixer, and combine it with the Objekt.
Cable the Objekt to the mixer, and the Mixer to the Combi.
Switch off all of the Thor oscillaters and filters (set the types to bypass). Disconnect the Thor audio ports.
Cable the Thor CV1 Out to the mixer channel level CV In.
In the Thor Matrix, add Amp Envelope >> 100 >> CV Out 1
Set the Mixer channel volume to 0 - so it opens when the envelope cv says so

Enjoy,
Brian
-
- RE Developer
- Posts: 425
- Joined: 23 Jan 2017
- Location: Fife, Scotland
Thought it would be good to share these as they aren't being used elsewhere. Here are 5 patches that ended up on the cutting room floor during patch creation...
Enjoy!
Nick @ SKP
Enjoy!
Nick @ SKP
You do not have the required permissions to view the files attached to this post.
Nick Baxter
SKP Sound Design - http://www.skpsounds.com
Youtube - https://www.youtube.com/c/SKPSoundDesign
SKP Sound Design - http://www.skpsounds.com
Youtube - https://www.youtube.com/c/SKPSoundDesign
-
- Posts: 182
- Joined: 20 May 2018
Picked up Objekt (as I knew I would, hah!) a couple days ago. This has to be my favorite Reason instrument in quite some time. Sounds FANTASTIC, has a very intuitive layout, has great depth of control but is still quite approachable.. Well done, Reason Studios!
Descent (OST) // The LotR: ACG (OST) // Warhammer: Geheimnisnacht (OST) // BattleLore (OST) // Takumi (OST) // Off The Rails (OST) // Chef's Table (OST)
(Composer for visual media / Adeptus Mechanicus Synthseer)
www.stevegernes.com
(Composer for visual media / Adeptus Mechanicus Synthseer)
www.stevegernes.com
-
- Posts: 80
- Joined: 27 Dec 2016
- Location: France
@challism : Awesome !
Sync music : Pond5 | Sound design : Vimeo | Ambient, Downtempo : Oper-8 | Shoegaze, Synthwave : Fake Luxury
-
- Moderator
- Posts: 10726
- Joined: 28 Dec 2015
I am really a sucker in programming physical modeled synths, but the randomizer feature is really good and helps to create my own sounds based on templates or presets while you can keep the original character or go beyond sanity. Well done 
Reason12, Win10
-
- Posts: 579
- Joined: 07 Sep 2017
- Location: Canada
Thanks Nick! I see "Mellow Yellow" is one of these, but which did make it to the final.
-
- Posts: 2259
- Joined: 15 Jan 2015
Has anyone identified the patches used in the Objekt teaser video amongst the patches that come with the device? Wondered if they are in there 
-
- Posts: 418
- Joined: 27 Sep 2019
Objekt Combinator Text Misalignment
I'm loving Objekt... pretty amazing instrument. I was having a go at some of the combinators, because there are so many little dodads to look at, I increased the application zoom to 240 and found that the "O" in Objekt is slightly skewed on the right side:
I'm loving Objekt... pretty amazing instrument. I was having a go at some of the combinators, because there are so many little dodads to look at, I increased the application zoom to 240 and found that the "O" in Objekt is slightly skewed on the right side:
You do not have the required permissions to view the files attached to this post.


Sound Dimension https://www.sounddimension.io
ReFiils: Ambientia Cinematic Soundscapes | String Theory (Friktion) | Algoritmo (Algoritm)
-
- Moderator
- Posts: 10726
- Joined: 28 Dec 2015
Maybe it is the "Oh" in ObjektStephenHutchinson wrote: ↑15 May 2023Objekt Combinator Text Misalignment
I'm loving Objekt... pretty amazing instrument. I was having a go at some of the combinators, because there are so many little dodads to look at, I increased the application zoom to 240 and found that the "O" in Objekt is slightly skewed on the right side:
Objekt Combinator Text Misalignment.jpg
Reason12, Win10
-
- Posts: 1228
- Joined: 15 Jan 2015
- Location: Sunnyvale, CA
I feel that Objekt is starting to fly by itself, higher than the eXode Massive Refil.
All the instruments in my studio are dancing:
All the instruments in my studio are dancing:
-
- Posts: 418
- Joined: 27 Sep 2019
A-ha! IT MUST BE!.. Of course... Ohhhhhhhhhhh bbbbbbb jjjjjjjjekkkkkkkkkttttttttttttt...Loque wrote: ↑15 May 2023Maybe it is the "Oh" in ObjektStephenHutchinson wrote: ↑15 May 2023Objekt Combinator Text Misalignment
I'm loving Objekt... pretty amazing instrument. I was having a go at some of the combinators, because there are so many little dodads to look at, I increased the application zoom to 240 and found that the "O" in Objekt is slightly skewed on the right side:
Objekt Combinator Text Misalignment.jpg![]()



Sound Dimension https://www.sounddimension.io
ReFiils: Ambientia Cinematic Soundscapes | String Theory (Friktion) | Algoritmo (Algoritm)
-
- RE Developer
- Posts: 425
- Joined: 23 Jan 2017
- Location: Fife, Scotland
Sorry, my mistake! The final unused patch is in fact -
Cheers!
You do not have the required permissions to view the files attached to this post.
Nick Baxter
SKP Sound Design - http://www.skpsounds.com
Youtube - https://www.youtube.com/c/SKPSoundDesign
SKP Sound Design - http://www.skpsounds.com
Youtube - https://www.youtube.com/c/SKPSoundDesign
-
- Posts: 409
- Joined: 15 May 2020
- Location: Iceland
Thanks!
https://futuregrapher.bandcamp.com/
Reason 12, Ableton Live 10 Suite, Roland Cloud, Arturia V9, Korg Legacy 3, Soundtoys 5, Waves Mercury, Sonic Charge Bundle, N.I.: Massive, Reaktor 6, FM8. + a lot of Hardware. Windows 7/10.
Reason 12, Ableton Live 10 Suite, Roland Cloud, Arturia V9, Korg Legacy 3, Soundtoys 5, Waves Mercury, Sonic Charge Bundle, N.I.: Massive, Reaktor 6, FM8. + a lot of Hardware. Windows 7/10.
-
- Information
-
Who is online
Users browsing this forum: CommonCrawl [Bot] and 10 guests