Page 1 of 1
Murder RhythmCutter [already in Prop Shop]
Posted: 19 Jun 2018
by turn2on
Murder RhythmCutter
Intro discount up to 20 July
Introducing a powerful rhythmic cutter effect. With the MURDER rack extension it is possible to generate various arps and sequences with a few effects to create new complex rhythms for any incoming signal.
With GRID SIZE you can cut incoming audio signals into slices in steps that are synced to your Reason project tempo.
STEPS PER BEAT sets the number of steps that are grouped as one beat. The RHYTHM MASK section includes up to 8 steps. Every step can be routed to various FX types and fx-hybrid variations. This part of the device is used to build new rhythms from scratch. The following are basic effects that can be routed to rhythm mask; 8 steps with 8 effect-variations:
- None (step is muted)
- Gate
- Repeat (each step repeats audio from previous step)
- Gate + Repeat (hybrid fx)
- Pitch / Reverse (pitch sound up/down one octave, steps played in reverse)
- Gate + Pitch / Reverse (hybrid fx)
- Repeat + Pitch / Reverse (hybrid fx)
- Gate + Repeat + Pitch / Reverse (hybrid fx)
In the GATE CREATOR section you can control Gate Depth and Length of gated steps before they are muted. Also, this section contains a Filter (HP/LP morph filter) for gated steps and a random filter per step.
The RECREATE section controls Repeat and RePitch effects. The REVERSE section controls playing mode in reverse with an offset. MURDER is a powerful creative engine for your tracks.
https://shop.propellerheads.se/rack-ext ... thmcutter/
Re: Murder RhythmCutter [already in Prop Shop]
Posted: 19 Jun 2018
by Loque
Interesting device. I guess a lot of glitchy stuff is possible beside stuttering. Can't wait to throw it into a delay feedback loop.
Re: Murder RhythmCutter [already in Prop Shop]
Posted: 19 Jun 2018
by VariableX
Yep, I like the look of this definitely going to give it a try!
Re: Murder RhythmCutter [already in Prop Shop]
Posted: 19 Jun 2018
by eusti
Interesting!
D.
Re: Murder RhythmCutter [already in Prop Shop]
Posted: 20 Jun 2018
by RobC
New ER for Nosaer? : )
Re: Murder RhythmCutter [already in Prop Shop]
Posted: 20 Jun 2018
by antic604
Hmm. Only 8 steps? Why is there a Matrix if a) it's doubled with the list in the next panel b) you can't have 2 effects at once (other than the predefined combinations)? But it does look interesting and I'll have to check it out!
BTW, Turn2On should hire a graphic designer. At least drop the gradients for the backgrounds - we're way past the 90s when people were easily impressed with 16+ colours on screen
Re: Murder RhythmCutter [already in Prop Shop]
Posted: 20 Jun 2018
by turn2on
antic604 wrote: ↑20 Jun 2018
Hmm. Only 8 steps? Why is there a Matrix if a) it's doubled with the list in the next panel b) you can't have 2 effects at once (other than the predefined combinations)? But it does look interesting and I'll have to check it out!
BTW, Turn2On should hire a graphic designer. At least drop the gradients for the backgrounds - we're way past the 90s when people were easily impressed with 16+ colours on screen
Hi. About GUI. I not talk that current GUI is perfect. It something neutral (without gradient - it more harder to look). If anybody have ideas and can draw as example what he think its cool. In current GUI gradient of Recreate and Master sections play with Glitch Grid gradient. I can remove gradient form Master and Recreate, but static colours in Glitch section make GUi harder to look and work.
Matrix doubled for speed change access, if use only popup steps - really harder to work, but this popups text help to read active steps.
8 steps? Its current solution. More is going to sequencing. Now its more glitch/stutter effect. But size up of steps can be interesting
Re: Murder RhythmCutter [already in Prop Shop]
Posted: 20 Jun 2018
by Loque
turn2on wrote: ↑20 Jun 2018
antic604 wrote: ↑20 Jun 2018
Hmm. Only 8 steps? Why is there a Matrix if a) it's doubled with the list in the next panel b) you can't have 2 effects at once (other than the predefined combinations)? But it does look interesting and I'll have to check it out!
BTW, Turn2On should hire a graphic designer. At least drop the gradients for the backgrounds - we're way past the 90s when people were easily impressed with 16+ colours on screen
Hi. About GUI. I not talk that current GUI is perfect. It something neutral (without gradient - it more harder to look). If anybody have ideas and can draw as example what he think its cool. In current GUI gradient of Recreate and Master sections play with Glitch Grid gradient. I can remove gradient form Master and Recreate, but static colours in Glitch section make GUi harder to look and work.
Matrix doubled for speed change access, if use only popup steps - really harder to work, but this popups text help to read active steps.
8 steps? Its current solution. More is going to sequencing. Now its more glitch/stutter effect. But size up of steps can be interesting
I did not tried it yet. I can see a Gate Re-Trigger, which could be some kind of RUN or Re-RUN of the sequence. If this is the case, it can be controlled to trigger the 8 step sequence. If there would be a Sequence-End CV out if the end of the 8 steps are reached, i could create a cascade of several MRCs?
Ok, might not really work, because i cannot stop the previous MRC - i also need to Bypass it. If i think a little bit more about it, i can image there is a tricky solution to create a longer sequence. But a simple start/stop trigger/hold and a sequence-finished CV out could help.
Any opinions?
Re: Murder RhythmCutter [already in Prop Shop]
Posted: 20 Jun 2018
by turn2on
Need time to think about it. Main idea of this create more steps of sequence?
Re: Murder RhythmCutter [already in Prop Shop]
Posted: 21 Jun 2018
by challism
Maybe you could have 4 different screens of 8 steps, giving the user 32 steps. Kind of the way Redrum works, where it only shows you 1-16, 17-32, etc. You could put a 4-way switch, in the blank area, next to the "steps/none" text. Having 32 steps of glitchy goodness would, indeed, open this up to more creativity, by the user.
Re: Murder RhythmCutter [already in Prop Shop]
Posted: 21 Jun 2018
by turn2on
Its nice idea. With add it to GUI no problems. Add steps need more technical part and need time. At this moment running big project (work last year on it), in parallel I try to make something for Murder soon as have time for it.
Re: Murder RhythmCutter [already in Prop Shop]
Posted: 23 Jun 2018
by Despondo
Re: Murder RhythmCutter [already in Prop Shop]
Posted: 23 Jun 2018
by RobC
Despondo wrote: ↑23 Jun 2018
RobC wrote: ↑20 Jun 2018
New ER for Nosaer? : )
Can't live without puns. xD
Re: Murder RhythmCutter [already in Prop Shop]
Posted: 30 Mar 2021
by MrFigg
Thought I’d bump this thread as I just noticed Murder is on sale and I think it’s great. Really good effect.
Re: Murder RhythmCutter [already in Prop Shop]
Posted: 30 Mar 2021
by challism
MrFigg wrote: ↑30 Mar 2021
Thought I’d bump this thread as I just noticed Murder is on sale and I think it’s great. Really good effect.
Yeah, this is one of my favorite Turn2On REs.
Re: Murder RhythmCutter [already in Prop Shop]
Posted: 04 Sep 2021
by turn2on
UPDATE 1.1.0:
Fixed glitches and unwanted clicks
https://www.reasonstudios.com/shop/rack ... thmcutter/
Also now with C2 patch possible to run x32 STEPS of Murder stuttering
"X32 STEPS" is a Combinator 2 patch.
Re: Murder RhythmCutter [already in Prop Shop]
Posted: 04 Sep 2021
by Lost Dog
Thank you!!!
Re: Murder RhythmCutter [already in Prop Shop]
Posted: 21 Jan 2022
by turn2on
UPDATE 1.1.2
- Noise bug hotfix.
- Now if Reverse Amount = 100%, effect reverse all slices
https://www.reasonstudios.com/shop/rack ... thmcutter/
Re: Murder RhythmCutter [already in Prop Shop]
Posted: 21 Jan 2022
by Lost Dog
Re: Murder RhythmCutter [already in Prop Shop]
Posted: 21 Jan 2022
by Bes
is the combinator2 patch now in the RE patch folder or should i grab them from the link
Re: Murder RhythmCutter [already in Prop Shop]
Posted: 22 Jan 2022
by crimsonwarlock
Updated
Re: Murder RhythmCutter [already in Prop Shop]
Posted: 22 Jan 2022
by moneykube
thanks once more for the update
