vapourware ゛わル
Hey folks,
"Knight Lore" and "Muktuk" are now set to allow downloads (16bit, 44k .wav) if you fancy them on the go...
Nick
"Knight Lore" and "Muktuk" are now set to allow downloads (16bit, 44k .wav) if you fancy them on the go...
Nick
Nick Baxter
SKP Sound Design - http://www.skpsounds.com
Youtube - https://www.youtube.com/c/SKPSoundDesign
SKP Sound Design - http://www.skpsounds.com
Youtube - https://www.youtube.com/c/SKPSoundDesign
- EpiGenetik
- Posts: 410
- Joined: 19 Jan 2015
- Location: Glasgow, EU
Interesting stuff
If you don't mind me asking, is this a DSP-based RE, sample-based RE, or is it an IDT?
Cheers
B
If you don't mind me asking, is this a DSP-based RE, sample-based RE, or is it an IDT?
Cheers
B
All... and more.EpiGenetik wrote: ↑10 Apr 2018Interesting stuff
If you don't mind me asking, is this a DSP-based RE, sample-based RE, or is it an IDT?
Cheers
B
Nick Baxter
SKP Sound Design - http://www.skpsounds.com
Youtube - https://www.youtube.com/c/SKPSoundDesign
SKP Sound Design - http://www.skpsounds.com
Youtube - https://www.youtube.com/c/SKPSoundDesign
Nick Baxter
SKP Sound Design - http://www.skpsounds.com
Youtube - https://www.youtube.com/c/SKPSoundDesign
SKP Sound Design - http://www.skpsounds.com
Youtube - https://www.youtube.com/c/SKPSoundDesign
It's incoming ASAP.
Right at the last minute, a stubborn (and very random) bug was found that has taken a few days to track down. Quite irritating as we are all itching to show it off!
More information to follow when i've got permission.
Nick Baxter
SKP Sound Design - http://www.skpsounds.com
Youtube - https://www.youtube.com/c/SKPSoundDesign
SKP Sound Design - http://www.skpsounds.com
Youtube - https://www.youtube.com/c/SKPSoundDesign
The last couple of days were a lot like this...
We shall prevail!
Nick Baxter
SKP Sound Design - http://www.skpsounds.com
Youtube - https://www.youtube.com/c/SKPSoundDesign
SKP Sound Design - http://www.skpsounds.com
Youtube - https://www.youtube.com/c/SKPSoundDesign
Well whaddya you know!
Incoming ASAP.
Incoming ASAP.
Nick Baxter
SKP Sound Design - http://www.skpsounds.com
Youtube - https://www.youtube.com/c/SKPSoundDesign
SKP Sound Design - http://www.skpsounds.com
Youtube - https://www.youtube.com/c/SKPSoundDesign
-
- Posts: 212
- Joined: 14 Jul 2015
- Location: Sweden
I hope before the weekend! My GAS has been aching for a new synth, that I don't need, to play around with.
- PurpleMonkeyDishes
- Posts: 164
- Joined: 25 Jul 2015
- Location: Florida
- Contact:
- Faastwalker
- Posts: 2282
- Joined: 15 Jan 2015
- Location: NSW, Australia
It's BIG!!
Seems just too bloated.
Might sound great,
But it isn’t easy on the eyes.
-
- Posts: 12
- Joined: 08 Feb 2015
Cool! I can’t wait to try this out.
But…the combination of the knob-heavy interface with the large variety of colors is problematic. Here’s what it looks like with the panel colors desaturated. Now the remaining colors really pop and it looks less gimmicky and more like a professional instrument. The effects section looks more like a modular synth rack.
But…the combination of the knob-heavy interface with the large variety of colors is problematic. Here’s what it looks like with the panel colors desaturated. Now the remaining colors really pop and it looks less gimmicky and more like a professional instrument. The effects section looks more like a modular synth rack.
- Faastwalker
- Posts: 2282
- Joined: 15 Jan 2015
- Location: NSW, Australia
It's extremely busy for sure. But the test will be how it sounds & how it is to use. I'm a little concerned as I find something like the Rob Papen synths very crowded & therefore a bit of a chore to work with beyond using presets. This thing looks more crowded than the most crowded RP synth. Looking forward to hitting TRY though as the demos we had so far sounded interesting.
-
- Posts: 1423
- Joined: 21 Sep 2016
I find the key to working with these massive wall of king synths is to make sure to get to know the layout. Once you get a little familiar you’ll find it to be as easy as something like ThorFaastwalker wrote: ↑26 Apr 2018It's extremely busy for sure. But the test will be how it sounds & how it is to use. I'm a little concerned as I find something like the Rob Papen synths very crowded & therefore a bit of a chore to work with beyond using presets. This thing looks more crowded than the most crowded RP synth. Looking forward to hitting TRY though as the demos we had so far sounded interesting.
I suppose what’s important is to get a full grasp on what the architecture of consists of. When I first got predator I felt the same way, but since learning it i feel like i unlocked new synth powers
Mayor of plucktown
-
- Posts: 728
- Joined: 05 Sep 2017
Nick; that guy who did the all-silver graphic of your synth - follow his advice!! It looks way more high-end and "pro", and this kind of "megasynth" will definitely sell more with that serious kind of look. It even makes it easier on the eyes purely from an interface point of view. At least consider making a silver skin / desaturated skin as an option?
Last edited by chaosroyale on 02 May 2018, edited 1 time in total.
it is not hard to navigate... lots to play with... I love it
https://soundcloud.com/moneykube-qube/s ... d-playlist
Proud Member Of The Awesome League Of Perpetuals
Proud Member Of The Awesome League Of Perpetuals
- jayhosking
- Posts: 613
- Joined: 28 Nov 2016
- Contact:
For me, a high number of knobs only matters if I can't follow the workflow of the device. Plus I hate digging around in menus unless it aids in the workflow/design. I haven't tried this device, but it's relatively simple to follow the chain from top to bottom, and everything has its own dedicated space, so I'm pretty curious about trying it.
Hey folks,
Just for the record, this is not my synth, i merely beta tested and provided a soundbank for it. This is a Softphonics release.
Here is a little gift from the gods. The Colossus user manual. It should tell you everything you need to know...
https://www.dropbox.com/s/cyoyvzmjm4iz2 ... l.pdf?dl=0
It's really not complex at all so you'll be fine once you figure out the signal flow. It works a little bit like the Layers RE's (but obviously you can go deeper if you wish) and it sounds fantastic.
Hope this info helps!
Nick
Just for the record, this is not my synth, i merely beta tested and provided a soundbank for it. This is a Softphonics release.
Here is a little gift from the gods. The Colossus user manual. It should tell you everything you need to know...
https://www.dropbox.com/s/cyoyvzmjm4iz2 ... l.pdf?dl=0
It's really not complex at all so you'll be fine once you figure out the signal flow. It works a little bit like the Layers RE's (but obviously you can go deeper if you wish) and it sounds fantastic.
Hope this info helps!
Nick
Nick Baxter
SKP Sound Design - http://www.skpsounds.com
Youtube - https://www.youtube.com/c/SKPSoundDesign
SKP Sound Design - http://www.skpsounds.com
Youtube - https://www.youtube.com/c/SKPSoundDesign
-
- Posts: 212
- Joined: 14 Jul 2015
- Location: Sweden
Softphonics sure has been productive as of lately. Is this an IDT? Dosen't mention anything about cv in the manual.
starfish91 wrote: ↑26 Apr 2018Cool! I can’t wait to try this out.
But…the combination of the knob-heavy interface with the large variety of colors is problematic. Here’s what it looks like with the panel colors desaturated. Now the remaining colors really pop and it looks less gimmicky and more like a professional instrument. The effects section looks more like a modular synth rack.
I think the color version looks better
- esselfortium
- Posts: 1456
- Joined: 15 Jan 2015
- Contact:
I'm fairly certain that this is IDT. Among other things, like the lack of CV, the "supersaw oscillator" and the effects listed are built-in IDT features. The "Lo-Fi" effect in particular seems to be a common giveaway that something is IDT. (Though admittedly that naming is also used on Synchronous, but I've otherwise mostly seen it listed on lots of IDT "synths".)Breach The Sky wrote: ↑27 Apr 2018Softphonics sure has been productive as of lately. Is this an IDT? Dosen't mention anything about cv in the manual.
Actually, all of the Softphonics devices appear to be IDTs, as best as I can tell. If I'm correct about that, their effects devices are just rebrandings of some of the built-in IDT effects that Propellerhead provides.
Sarah Mancuso
My music: Future Human
My music: Future Human
- PurpleMonkeyDishes
- Posts: 164
- Joined: 25 Jul 2015
- Location: Florida
- Contact:
Propellerhead don't provide anything for IDT, ......IDT and all inside it are 3rd party 'ujam'esselfortium wrote: ↑27 Apr 2018I'm fairly certain that this is IDT. Among other things, like the lack of CV, the "supersaw oscillator" and the effects listed are built-in IDT features. The "Lo-Fi" effect in particular seems to be a common giveaway that something is IDT. (Though admittedly that naming is also used on Synchronous, but I've otherwise mostly seen it listed on lots of IDT "synths".)Breach The Sky wrote: ↑27 Apr 2018Softphonics sure has been productive as of lately. Is this an IDT? Dosen't mention anything about cv in the manual.
Actually, all of the Softphonics devices appear to be IDTs, as best as I can tell. If I'm correct about that, their effects devices are just rebrandings of some of the built-in IDT effects that Propellerhead provides.
Music is everything
PurpleMonkeyDishwasher
PurpleMonkeyDishwasher
-
- Information
-
Who is online
Users browsing this forum: No registered users and 20 guests