Page 4 of 6
Re: PSQ-1684 v3.0 is in the shop!
Posted: 10 Nov 2017
by rcbuse
PSQ-1684 has been updated to 3.1.0
Added:
* Pop-up menus for sequencer parameters.
* Sequencer Velocity and Aux
* Added sequencer mode Shift Register Position
Re: PSQ-1684 v3.1.0 is in the shop! [Updates]
Posted: 10 Nov 2017
by ejanuska
Drops phone....runs to computer.
Re: PSQ-1684 v3.1.0 is in the shop! [Updates]
Posted: 10 Nov 2017
by artotaku
+1
Nice. Gate Length per step to tie notes as in Thor would be nice. I know it´s possible via mod matrix to control the width but takes up a lot of slots. Or is there another workaround?
Re: PSQ-1684 v3.0 is in the shop!
Posted: 11 Nov 2017
by kefkekeyser
rcbuse wrote: ↑10 Nov 2017
PSQ-1684 has been updated to 3.1.0
Added:
* Pop-up menus for sequencer parameters.
* Sequencer Velocity and Aux
* Added sequencer mode Shift Register Position
How does Sequencer Velocity and Aux work? Cannot find it in the manual (manual download link points to a manual for version 3.0.0).
Re: PSQ-1684 v3.0 is in the shop!
Posted: 11 Nov 2017
by ejanuska
kefkekeyser wrote: ↑11 Nov 2017
rcbuse wrote: ↑10 Nov 2017
PSQ-1684 has been updated to 3.1.0
Added:
* Pop-up menus for sequencer parameters.
* Sequencer Velocity and Aux
* Added sequencer mode Shift Register Position
How does Sequencer Velocity and Aux work? Cannot find it in the manual (manual download link points to a manual for version 3.0.0).
On the bottom right of the sequencer, click where it says "knobs".
Re: PSQ-1684 v3.1.0 is in the shop! [Updates]
Posted: 11 Nov 2017
by ejanuska
What a great update.
The extra sequencer outputs are great.
Re: PSQ-1684 v3.0 is in the shop!
Posted: 11 Nov 2017
by Emian
rcbuse wrote: ↑10 Nov 2017
PSQ-1684 has been updated to 3.1.0
Added:
* Pop-up menus for sequencer parameters.
* Sequencer Velocity and Aux
* Added sequencer mode Shift Register Position
OMG thx for the sequencer Velocity !!!! and the rest
This and Korde are my favourite sequencers for my Rack synths, & i believe there's a new sequencer comming, after seein' a tease on your Facebook...
Re: PSQ-1684 v3.0 is in the shop!
Posted: 12 Nov 2017
by seqoi
Emian wrote: ↑11 Nov 2017
rcbuse wrote: ↑10 Nov 2017
PSQ-1684 has been updated to 3.1.0
Added:
* Pop-up menus for sequencer parameters.
* Sequencer Velocity and Aux
* Added sequencer mode Shift Register Position
OMG thx for the sequencer Velocity !!!! and the rest
This and Korde are my favourite sequencers for my Rack synths, & i believe there's a new sequencer comming, after seein' a tease on your Facebook...
What tease? Please post picture here for us who don't use facebook..
Love Panda stuff...
Re: PSQ-1684 v3.0 is in the shop!
Posted: 12 Nov 2017
by Emian
seqoi wrote: ↑12 Nov 2017
Emian wrote: ↑11 Nov 2017
OMG thx for the sequencer Velocity !!!! and the rest
This and Korde are my favourite sequencers for my Rack synths, & i believe there's a new sequencer comming, after seein' a tease on your Facebook...
What tease? Please post picture here for us who don't use facebook..
Love Panda stuff...
i don't know why, but it seems the Panda's Facebook-page has disapeared.... but i'm sure i saw a tease a few weeks ago !
Re: PSQ-1684 v3.1.0 is in the shop! [Updates]
Posted: 12 Nov 2017
by rcbuse
- Screen Shot 2017-11-12 at 9.29.35 AM.png (11.24 KiB) Viewed 7077 times
Re: PSQ-1684 v3.0 is in the shop!
Posted: 12 Nov 2017
by rcbuse
Emian wrote: ↑12 Nov 2017
i don't know why, but it seems the Panda's Facebook-page has disapeared.... but i'm sure i saw a tease a few weeks ago !
I have left both facebook and twitter.
Re: PSQ-1684 v3.1.0 is in the shop! [Updates]
Posted: 12 Nov 2017
by sdst
rcbuse wrote: ↑12 Nov 2017
Screen Shot 2017-11-12 at 9.29.35 AM.png
Propulsion 2?
different shuffle for every lane would be great
Re: PSQ-1684 v3.0 is in the shop!
Posted: 12 Nov 2017
by Emian
rcbuse wrote:Emian wrote: ↑12 Nov 2017
i don't know why, but it seems the Panda's Facebook-page has disapeared.... but i'm sure i saw a tease a few weeks ago !
I have left both facebook and twitter.
Ok that's cool. I'm glad I wasn't imagining things [emoji16]
Lookin'ffwd to what you're cooking!
Verstuurd vanaf mijn FEVER met Tapatalk
Re: PSQ-1684 v3.0 is in the shop!
Posted: 15 Nov 2017
by Bumbum
rcbuse wrote: ↑12 Nov 2017
I have left both facebook and twitter.
As a panda fanboy, i approve this
cant wait propulsion update
Re: PSQ-1684 v3.0 is in the shop!
Posted: 15 Nov 2017
by theshoemaker
rcbuse wrote: ↑10 Nov 2017
PSQ-1684 has been updated to 3.1.0
Added:
* Pop-up menus for sequencer parameters.
* Sequencer Velocity and Aux
* Added sequencer mode Shift Register Position
Is it possible to set the sequencer values in the matrix before quantizing? Or did I just do something wrong with the setup. I'd love to have an alternative Panel for the Sequencers W-Z as I really don't like the knobs. I'd like to have something like a custom display. Thats why I thought using a Matrix or some other device for setting and even randomizing the values.
Re: PSQ-1684 v3.0 is in the shop!
Posted: 15 Nov 2017
by rcbuse
theshoemaker wrote: ↑15 Nov 2017
rcbuse wrote: ↑10 Nov 2017
PSQ-1684 has been updated to 3.1.0
Added:
* Pop-up menus for sequencer parameters.
* Sequencer Velocity and Aux
* Added sequencer mode Shift Register Position
Is it possible to set the sequencer values in the matrix before quantizing? Or did I just do something wrong with the setup. I'd love to have an alternative Panel for the Sequencers W-Z as I really don't like the knobs. I'd like to have something like a custom display. Thats why I thought using a Matrix or some other device for setting and even randomizing the values.
Very interesting idea, something I hadn't considered but now that we have multiple panels this would be possible....
Re: PSQ-1684 v3.0 is in the shop!
Posted: 15 Nov 2017
by Biolumin3sc3nt
rcbuse wrote: ↑15 Nov 2017
theshoemaker wrote: ↑15 Nov 2017
Is it possible to set the sequencer values in the matrix before quantizing? Or did I just do something wrong with the setup. I'd love to have an alternative Panel for the Sequencers W-Z as I really don't like the knobs. I'd like to have something like a custom display. Thats why I thought using a Matrix or some other device for setting and even randomizing the values.
Very interesting idea, something I hadn't considered but now that we have multiple panels this would be possible....
Awesome Idea!
Re: PSQ-1684 v3.1.0 is in the shop! [Updates]
Posted: 15 Nov 2017
by Faastwalker
Totally intrigued by this device. Bought it a while back but have hardly used it. It's still a mystery to me.
Must invest some more time in this thing
Re: PSQ-1684 v3.0 is in the shop!
Posted: 16 Nov 2017
by ejanuska
theshoemaker wrote: ↑15 Nov 2017
Is it possible to set the sequencer values in the matrix before quantizing? Or did I just do something wrong with the setup. I'd love to have an alternative Panel for the Sequencers W-Z as I really don't like the knobs. I'd like to have something like a custom display. Thats why I thought using a Matrix or some other device for setting and even randomizing the values.
I usually use the sequencer to select patterns in a Matrix or other pattern based device like Propulsion. Then you can randomize the matrix and feed it's note data through a quantizer.
Re: PSQ-1684 v3.0 is in the shop!
Posted: 16 Nov 2017
by theshoemaker
ejanuska wrote: ↑16 Nov 2017
theshoemaker wrote: ↑15 Nov 2017
Is it possible to set the sequencer values in the matrix before quantizing? Or did I just do something wrong with the setup. I'd love to have an alternative Panel for the Sequencers W-Z as I really don't like the knobs. I'd like to have something like a custom display. Thats why I thought using a Matrix or some other device for setting and even randomizing the values.
I usually use the sequencer to select patterns in a Matrix or other pattern based device like Propulsion. Then you can randomize the matrix and feed it's note data through a quantizer.
Ahhh ... this way round
but as far as i know stepping in Matrix can't be controlled from outside. I could step on gate input in a Thor ... but I don't like its interface. How can I feed the note data trough the quantizer? Route Matrix Note cv to CV1-8 in of PSQ and then in the Mod matrix set CV in to route to one of the quants? Maybe a nice patch for the showroom?
Re: PSQ-1684 v3.0 is in the shop!
Posted: 16 Nov 2017
by ejanuska
theshoemaker wrote: ↑16 Nov 2017
Ahhh ... this way round
but as far as i know stepping in Matrix can't be controlled from outside. I could step on gate input in a Thor ... but I don't like its interface. How can I feed the note data trough the quantizer? Route Matrix Note cv to CV1-8 in of PSQ and then in the Mod matrix set CV in to route to one of the quants? Maybe a nice patch for the showroom?
Put the Matrix in a combinator to control the pattern select using the combinator programmer.
Run a cable from PSQ-1684 Sequencer Note output to a Combinator CV input for Matrix pattern control.
Run the cable from Note out from the Matrix to the quantizer input on the back of the PSQ-1684, run the quantizer output to your instrument of choice.
Re: PSQ-1684 v3.1.0 is in the shop! [Updates]
Posted: 16 Nov 2017
by ejanuska
Use the CVA-7 CV Analyzer to verify your note data is doing what you want.
Also its a good idea to select unipolar on the combinator CV input. (default is bi-polar)
Get crazy and send the Curve output from the same Matrix to your instruments filter CV input or other parameter.
Re: PSQ-1684 v3.0 is in the shop!
Posted: 16 Nov 2017
by ejanuska
ejanuska wrote: ↑16 Nov 2017
theshoemaker wrote: ↑16 Nov 2017
Ahhh ... this way round
but as far as i know stepping in Matrix can't be controlled from outside. I could step on gate input in a Thor ... but I don't like its interface. How can I feed the note data trough the quantizer? Route Matrix Note cv to CV1-8 in of PSQ and then in the Mod matrix set CV in to route to one of the quants? Maybe a nice patch for the showroom?
Put the Matrix in a combinator to control the pattern select using the combinator programmer.
Run a cable from PSQ-1684 Sequencer Note output to a Combinator CV input for Matrix pattern control.
Run the cable from the Matrix Note out to the quantizer input on the back of the PSQ-1684, run the quantizer output to your instrument of choice.
Re: PSQ-1684 v3.1.0 is in the shop! [Updates]
Posted: 19 Nov 2017
by botnotbot
First, let me say that I'm really excited by the possibilities opened by PSQ-1684! I'm starting to understand what tall the Eurorack heads have been on about -- luckily it's costing me quite less than a fortune to experience it
I am confused about one thing though, which is unfortunately not cleared up in the manual:
Where is the 'velocity out' CV for the sequencer? There is a dedicated page of knobs but I haven't been able to determine how to make it affect anything. I thought it might be affecting the gate signal but that is coming out at 127 according to CVA-7.
Thanks in advance for your help!
Re: PSQ-1684 v3.1.0 is in the shop! [Updates]
Posted: 19 Nov 2017
by WongoTheSane
botnotbot wrote: ↑19 Nov 2017
First, let me say that I'm really excited by the possibilities opened by PSQ-1684! I'm starting to understand what tall the Eurorack heads have been on about -- luckily it's costing me quite less than a fortune to experience it
I am confused about one thing though, which is unfortunately not cleared up in the manual:
Where is the 'velocity out' CV for the sequencer? There is a dedicated page of knobs but I haven't been able to determine how to make it affect anything. I thought it might be affecting the gate signal but that is coming out at 127 according to CVA-7.
Thanks in advance for your help!
The gate signal
is affected by velocities. Try this:
- On the back, connect Gate Sequencer S1 to CVA-7.
- Reset Device and press Play so the device is running.
- In the Sequencer S1 section, set "End" to "W1" (to help visualize the effect, otherwise it would happen only once every 32 pulses).
- Select "Velocities" in the new "Knobs" pop-up menu.
- Play with the W1 knob: you should see the effect on CVA-7.
- velocity.JPG (97.26 KiB) Viewed 6639 times
Obviously this isn't a "real world" setup, it's just to show exactly how it's handled. If the velocities aren't affected by anything and all the knobs are set at 100%, you won't see the effect, but if you randomize the device for instance (or modulate those velocities through any means), you will.