Free MoPol Polyphonic CV Merger in the Shop

This forum is for discussing Rack Extensions. Devs are all welcome to show off their goods.
User avatar
rcbuse
RE Developer
Posts: 1175
Joined: 16 Jan 2015
Location: SR388
Contact:

07 May 2015

https://shop.propellerheads.se/product/ ... cv-merger/

MoPol Polyphonic CV Merger converts 8 CV Gate/Note inputs and merges them into a single CV Gate/Note output.
[*]8 CV Gate/Note Inputs[/*][*]3 different CV Gate/Note Outputs[/*]
  • Gate Input 1 Copy
  • Logical AND of connected Gates 1-8 (All connected gates must be on) 
  • Logical OR of connected Gates 1-8 (Any connected gate is on)
Image 

Image


Image
Attachments
Screen_Shot_2015-05-06_at_11.49.53_AM.png
Screen_Shot_2015-05-06_at_11.49.53_AM.png (55.84 KiB) Viewed 2390 times

User avatar
Ashpool
Posts: 128
Joined: 21 Apr 2015

07 May 2015

Another Panda in the rack!
Thank you :-)

User avatar
Marco Raaphorst
Posts: 2504
Joined: 22 Jan 2015
Location: The Hague, The Netherlands
Contact:

07 May 2015

really cool! using a couple of Matrix devices to play polyphony stuff. 

User avatar
Marco Raaphorst
Posts: 2504
Joined: 22 Jan 2015
Location: The Hague, The Netherlands
Contact:

07 May 2015

I don't understand the difference between the A, B and C outputs. How does it work?

User avatar
rcbuse
RE Developer
Posts: 1175
Joined: 16 Jan 2015
Location: SR388
Contact:

07 May 2015

Marco Raaphorst wrote:I don't understand the difference between the A, B and C outputs. How does it work?
Output A is just a copy of Input 1, so when input 1 is high, so is output A.
Output B will be high when ALL connected Input Gates to be high (Input 1 AND Input 2 AND Input ....)
Output C will be high when ANY connected Input Gates are high (Input 1 OR Input 2 OR Input ....)

I figure most people will just use Output A, but if you use B or C you can get very interesting rhythmic patterns when running your sequencers are different clock rates.  (Input A @ 1/2, Input B @ 1/8T, Input C @ 1/16 ...)

User avatar
Marco Raaphorst
Posts: 2504
Joined: 22 Jan 2015
Location: The Hague, The Netherlands
Contact:

07 May 2015

Thanks! Is this the first RE which sends truly Poly CV? 

User avatar
rcbuse
RE Developer
Posts: 1175
Joined: 16 Jan 2015
Location: SR388
Contact:

07 May 2015

Marco Raaphorst wrote:Thanks! Is this the first RE which sends truly Poly CV? 
I'm pretty sure the Mingler RE does something similar for two CV inputs.  As far as I know, this is the first to merge so many inputs in such a minimal way.

User avatar
Marco Raaphorst
Posts: 2504
Joined: 22 Jan 2015
Location: The Hague, The Netherlands
Contact:

07 May 2015

Marco Raaphorst wrote:Thanks! Is this the first RE which sends truly Poly CV? 
rcbuse wrote:
I'm pretty sure the Mingler RE does something similar for two CV inputs.  As far as I know, this is the first to merge so many inputs in such a minimal way.
way cool for making a few matrix devices trigger a synth or 2! thanks!

User avatar
challism
Moderator
Posts: 4642
Joined: 17 Jan 2015
Location: Fanboy Shill, Boomertown

07 May 2015

Sweet!  Thank you so much for showing us some free love!!
Players are to MIDI what synthesizers are to waveforms.

ReasonTalk Rules and Guidelines

User avatar
XSynth
Posts: 60
Joined: 16 Jan 2015
Location: Denmark
Contact:

07 May 2015

Odd, i didnt expect to see CV Tuner handle poly CV through MoPol but that is also possible.
Cant wait to try it out with Korde and Mercury :)

MoPol is a game changer and its free, i highly recommend getting it.

I'mmmmm Super  :s0221:

User avatar
MirEko
Posts: 274
Joined: 16 Jan 2015

07 May 2015

XSynth wrote:Odd, i didnt expect to see CV Tuner handle poly CV through MoPol but that is also possible.
Cant wait to try it out with Korde and Mercury :)

MoPol is a game changer and its free, i highly recommend getting it.

I'mmmmm Super  :s0221:
Say what! I wouldn't have even tried that but that's awesome it works :)

Awesome free device..
:reason: :record: :re: :ignition: :refill: :PUF_take: :PUF_figure:

User avatar
geronimo
Posts: 627
Joined: 17 Jan 2015
Location: France

07 May 2015

Marco Raaphorst wrote: Output A is just a copy of Input 1, so when input 1 is high, so is output A.
Output B will be high when ALL connected Input Gates to be high (Input 1 AND Input 2 AND Input ....)
Output C will be high when ANY connected Input Gates are high (Input 1 OR Input 2 OR Input ....)
Many thanks for the explanations but  I don't know how translated "high" in French in your comments .
And I don't understand . :sneaky:

User avatar
rcbuse
RE Developer
Posts: 1175
Joined: 16 Jan 2015
Location: SR388
Contact:

07 May 2015

rcbuse wrote: Output A is just a copy of Input 1, so when input 1 is high, so is output A.
Output B will be high when ALL connected Input Gates to be high (Input 1 AND Input 2 AND Input ....)
Output C will be high when ANY connected Input Gates are high (Input 1 OR Input 2 OR Input ....)
geronimo wrote:
Many thanks for the explanations but  I don't know how translated "high" in French in your comments .
And I don't understand .  :sneaky:

high = gate ON
low = gate OFF

User avatar
mrj1nx
Posts: 90
Joined: 18 Mar 2015

07 May 2015

Will this work with Mercury as well? That'd be real nice, might start using it more if that's the case.
 

User avatar
JoshuaPhilgarlic
Posts: 389
Joined: 16 Jan 2015
Location: Munich/ Germany

07 May 2015

This is amazing! I waited a long time for something like that. Thanks a lot  :s0221: !!!

User avatar
geronimo
Posts: 627
Joined: 17 Jan 2015
Location: France

07 May 2015

rcbuse wrote: high = gate ON
low = gate OFF
:s0826: Many thanks; I never found it .

User avatar
rcbuse
RE Developer
Posts: 1175
Joined: 16 Jan 2015
Location: SR388
Contact:

07 May 2015

mrj1nx wrote:Will this work with Mercury as well? That'd be real nice, might start using it more if that's the case.
it sure will!  :)

User avatar
mrj1nx
Posts: 90
Joined: 18 Mar 2015

07 May 2015

mrj1nx wrote:Will this work with Mercury as well? That'd be real nice, might start using it more if that's the case.
rcbuse wrote:
it sure will!  :)
Awesome! Finally I don't have to have 4 devices, with the same patch... finally i can tweak the sounds and experiment etc... You essentially un-gimped Mercury. Thanks!
 

inmatus
Posts: 63
Joined: 25 Mar 2015

07 May 2015

Now I am lazy and ask b4 checking myself ;)

I was at a time fiddling around with Blamsoft Poly modular and A-series and Jiggery Poker Ammo 100 /charlotte. I wanted to use the differents REs together but Blamsoft use polymodular..
Can the Mopol somehow be used as a bridge?

Maybe I check out myself ;)

hydlide

07 May 2015

I'll grab this one too. Next to Shape and Korde they will be a nice addition :D

Heater
Posts: 893
Joined: 16 Jan 2015

07 May 2015

It's amazing.  A very useful little gadget.

User avatar
dvdrtldg
Posts: 2386
Joined: 17 Jan 2015

07 May 2015

No manual? I get the basic idea of what this does, but it would be great to have a comprehensive rundown via manual or YouTube on how it works (and possible applications) in case I'm missing something.


User avatar
rcbuse
RE Developer
Posts: 1175
Joined: 16 Jan 2015
Location: SR388
Contact:

07 May 2015

devilfish wrote:THANK YOU Mr. Panda ;) http://www.reasontalk.com/post/new-re-n ... 1286820678
Awww yea, I remember that thread! 

User avatar
rcbuse
RE Developer
Posts: 1175
Joined: 16 Jan 2015
Location: SR388
Contact:

07 May 2015

dvdrtldg wrote:No manual? I get the basic idea of what this does, but it would be great to have a comprehensive rundown via manual or YouTube on how it works (and possible applications) in case I'm missing something.
Perhaps I'll throw together a manual or a video, but I highly doubt you are missing anything.  There just isn't much to it.

Post Reply
  • Information
  • Who is online

    Users browsing this forum: No registered users and 25 guests