It's too obvious now. It's highly likely, it will get fixed.
Complex from Propellerhead
- Noiserunner
- Posts: 79
- Joined: 26 Sep 2018
- Location: Munich, Germany
Is it just at my computer or is it impossible to add automation to the "Master" knob of Complex-1?
(Afaik) Every other RE can be automated this way.
I stumbled across it today when i made a drone sound with Complex-1 and tried to change the volume over time. So I have to automate the channel volume .
(Afaik) Every other RE can be automated this way.
I stumbled across it today when i made a drone sound with Complex-1 and tried to change the volume over time. So I have to automate the channel volume .
(MacBook Pro 13", some soft- and hardware)
It's not showing up in the combinator list, either.Noiserunner wrote: ↑24 Jan 2020Is it just at my computer or is it impossible to add automation to the "Master" knob of Complex-1?
(Afaik) Every other RE can be automated this way.
I stumbled across it today when i made a drone sound with Complex-1 and tried to change the volume over time. So I have to automate the channel volume .
r11s
- tobypearce
- Posts: 576
- Joined: 28 Sep 2015
- Contact:
I normally add a Selig Gain device and use that for simple volume automation.Noiserunner wrote: ↑24 Jan 2020Is it just at my computer or is it impossible to add automation to the "Master" knob of Complex-1?
(Afaik) Every other RE can be automated this way.
I stumbled across it today when i made a drone sound with Complex-1 and tried to change the volume over time. So I have to automate the channel volume .
I used to automate the SSL volume level but this makes it difficult to tweak the volume later in the mixing process.
https://onetrackperweek.com
One year - 52 tracks - Electronic Dance Music
One year - 52 tracks - Electronic Dance Music
- Noiserunner
- Posts: 79
- Joined: 26 Sep 2018
- Location: Munich, Germany
Thank you for the hint.tobypearce wrote: ↑31 Jan 2020
I normally add a Selig Gain device and use that for simple volume automation.
It is probably such an obvious solution, that I didn't think of it myself .
I don't own the Selig Gain, but there are ReGain Audio Gain Assistant or kHs Gain, which are free. Today evening I will give them a try.
(MacBook Pro 13", some soft- and hardware)
Instrument volume and channel volume (fader) are at the extreme opposite ends of the signal path, and therefore do different things. Putting Selig Gain after the device would be identical to automating the volume (or using CV to control volume/panning/etc). This would however not be the best way to add fader automation - you would instead put Selig Gain in the post-everything channel insert to do this (and it would have to be the last device in the insert to ensure correct functioning). Apologies if I'm stating the obvious here…tobypearce wrote: ↑31 Jan 2020I normally add a Selig Gain device and use that for simple volume automation.Noiserunner wrote: ↑24 Jan 2020Is it just at my computer or is it impossible to add automation to the "Master" knob of Complex-1?
(Afaik) Every other RE can be automated this way.
I stumbled across it today when i made a drone sound with Complex-1 and tried to change the volume over time. So I have to automate the channel volume .
I used to automate the SSL volume level but this makes it difficult to tweak the volume later in the mixing process.
Selig Audio, LLC
Folks, there is question about Filter self-oscillating in Complex1 - why it works (self-oscilate at maximum resonance) only from HP filter output ? (And from LP - no).
This is intended behavior ?
In user manual i did not found any mention about this difference. Just phraze "At maximum amount (of Res) the filter will self-resonate."
This is intended behavior ?
In user manual i did not found any mention about this difference. Just phraze "At maximum amount (of Res) the filter will self-resonate."
The noise rate knob can't be automated. Can you confirm ? I'll make a ticket if so, thank youBRIGGS wrote: ↑24 Jan 2020It's not showing up in the combinator list, either.Noiserunner wrote: ↑24 Jan 2020Is it just at my computer or is it impossible to add automation to the "Master" knob of Complex-1?
(Afaik) Every other RE can be automated this way.
I stumbled across it today when i made a drone sound with Complex-1 and tried to change the volume over time. So I have to automate the channel volume .
-
- Information
-
Who is online
Users browsing this forum: No registered users and 3 guests