The future of Step Note Recorder
- Neko the Jaguar
- Posts: 67
- Joined: 19 Jan 2015
I don't have any sound coming out. Any help would be appreciated. I see the gate is flashing as it plays, but when I flip the rack over, the gate and cv outputs of the STEP are connected to the Subtractor Sequencer control gate and cv. The Audio Output of the Subtractor main, goes into the "from devices" on the combinator. But nothing from the Combi output to anywhere.
Is the gate lamp flashing on Subtractor as well?Neko the Jaguar wrote:I don't have any sound coming out. Any help would be appreciated. I see the gate is flashing as it plays, but when I flip the rack over, the gate and cv outputs of the STEP are connected to the Subtractor Sequencer control gate and cv. The Audio Output of the Subtractor main, goes into the "from devices" on the combinator. But nothing from the Combi output to anywhere.
If you want, you can send the combi patch to info@roboticbean.com and I'll take a look.
- Sinistereo
- Posts: 128
- Joined: 15 Jan 2015
Do you mean the combinator outputs are not connected? Or are they connected to an audio channel but you aren't hearing anything?Neko the Jaguar wrote:I don't have any sound coming out. Any help would be appreciated. I see the gate is flashing as it plays, but when I flip the rack over, the gate and cv outputs of the STEP are connected to the Subtractor Sequencer control gate and cv. The Audio Output of the Subtractor main, goes into the "from devices" on the combinator. But nothing from the Combi output to anywhere.
- Neko the Jaguar
- Posts: 67
- Joined: 19 Jan 2015
buddard wrote: Is the gate lamp flashing on Subtractor as well? If you want, you can send the combi patch to info@roboticbean.com and I'll take a look.
Thank you for your time, but I figured it out. It needed an audio track. The combinator outputs weren't connected to anything, so I created an audio track, and viola, "we've got bush, we've got bush".Sinistereo wrote:Do you mean the combinator outputs are not connected? Or are they connected to an audio channel but you aren't hearing anything?
Step 1.0.1 is now going through beta testing as of yesterday! We're counting on a couple of days up to 1-2 weeks before we can submit the update, depending on how many bugs our testers will find.
Here's the feature list:
[*]All CV Thru connections now double as Outputs when nothing is connected to the corresponding input:[/*]
We will be working on another update during the summer to try and incorporate more feature requests. It will probably to be released during early autumn or so.
Here's the feature list:
[*]All CV Thru connections now double as Outputs when nothing is connected to the corresponding input:[/*]
- Clock Out sends clock pulses that correspond to the Shuffle and Gate Width settings, but will ignore rests and ties
- Reset Out does exactly the same as the "normal" Reset output in the Outputs section
- Mute Out will be "high" (1.0V) for the duration of each rest in the sequence (programmed or triggered via the Mute button), 0V otherwise
- Transpose Out will send a pitch CV signal that corresponds to the Root Key + the current Transposition amount
- Also works when recording from Matrix using Emian's "combinator trick"
We will be working on another update during the summer to try and incorporate more feature requests. It will probably to be released during early autumn or so.
-
- Information
-
Who is online
Users browsing this forum: Trendiction [Bot] and 4 guests