[STOCK] 16-Step Sample Sequencer

[deeplink]

Hi RT

Introduction
Following on from the 16-Step FX Sequencer Series,
here is a Sample Sequencer created using the same routing/device methodology.

Think of it like if the NN19, Redrum and Kong had a little baby.
And only stock/built in devices are used, so any one can use it.

Overview

• Simply program your beat on the front panel, and turn the Sample Select knob until you find the sound you like.

• You have full control over the pitch, length and decay/release of the sample, as well as a Multi-Mode filter with a dedicated envelope.

• From there you can add in some more flavor with the tone and noise generators as well as distortion and bit crushing effects.

• And lastly shape your sound with a compressor, transient shaper, tone and hp/lp filter control

This device comes pre-loaded with 60+ kick drum samples from the Reason Drum Supply SB - so it should work with everybody.
(BTW: The NN19 can load up to 128 samples at once, a lot more than the NNXT.)

Of course, you can load in your own drum or sound samples into the Sampler (you will probably want to anyway!)
Just remember to right click the NN19 > Auto Map and ensure KYB Track is deselected.

Cheers,
deeplink