High Res CV
- raccoonboy
- Posts: 471
- Joined: 22 Oct 2015
Would love to see a much higher res CV in Reason. Seems doubtful now as they seem to be concentrating on other things and seeing some people's comments here, a lot are not interested in CV apparently.
It's one of the best things about Reason IMO! Time will tell I guess! I want more and more CV options personally. Smaller REs available (ala spider merger) so things can be more modular. Switches on the back of each synth to turn off quantisation (for tonal CV control), I realise there are other ways round this. Would integrate with external synths better this way too.
It's one of the best things about Reason IMO! Time will tell I guess! I want more and more CV options personally. Smaller REs available (ala spider merger) so things can be more modular. Switches on the back of each synth to turn off quantisation (for tonal CV control), I realise there are other ways round this. Would integrate with external synths better this way too.
- Carly(Poohbear)
- Competition Winner
- Posts: 2871
- Joined: 25 Jan 2015
- Location: UK
There are quite a few of us who love CV and are into modular setups etc.
It's a shame that IDT devices don't have CV and a lot of other devices just miss the mark as they lack CV.
Then you have other devices that do understand the importance of CV, namely Blamsoft and JP
Still holding my breath that Reveal Sound will put CV in ReSpire, that could really transform that device.
I have not had time to look at Kron and what it really has extra to offer.
How much more Res do you want? at the moment it's from -1 to 1 up to 5 decimal places.
PoohBear
-------------------------------------------------------------------------------------------------------
Recent Music made with Reason
(Electronic) Poly Madness
(Electronic) Solar Dance
(Electronic) Into The Night
(Upbeat) The Players Took Me There Made in Reason 9 with heavy use of the players
(Electronic) 5 Steps (Video added) Updated
------------------------------------------------------------------------------------------
My Soundcloud Page ....... Nektar Mappings
------------------------------------------------------------------------------------------
It's a shame that IDT devices don't have CV and a lot of other devices just miss the mark as they lack CV.
Then you have other devices that do understand the importance of CV, namely Blamsoft and JP
Still holding my breath that Reveal Sound will put CV in ReSpire, that could really transform that device.
I have not had time to look at Kron and what it really has extra to offer.
How much more Res do you want? at the moment it's from -1 to 1 up to 5 decimal places.
PoohBear
-------------------------------------------------------------------------------------------------------
Recent Music made with Reason
(Electronic) Poly Madness
(Electronic) Solar Dance
(Electronic) Into The Night
(Upbeat) The Players Took Me There Made in Reason 9 with heavy use of the players
(Electronic) 5 Steps (Video added) Updated
------------------------------------------------------------------------------------------
My Soundcloud Page ....... Nektar Mappings
------------------------------------------------------------------------------------------
- pushedbutton
- Posts: 1538
- Joined: 16 Jan 2015
- Location: Lancashire, UK
- Contact:
Aww but that would mean having to drop midi for osc. That's about as simple as replacing roadways with a series of tubes.
@pushedbutton on twitter, add me, send me a message, but don't try to sell me stuff cos I'm skint.
Using Reason since version 3 and still never finished a song.
Using Reason since version 3 and still never finished a song.
If you say that you're into CV and you don't have Kron yet, you're not into CV.Carly(Poohbear) wrote:There are quite a few of us who love CV and are into modular setups etc.
It's a shame that IDT devices don't have CV and a lot of other devices just miss the mark as they lack CV.
Then you have other devices that do understand the importance of CV, namely Blamsoft and JP
Still holding my breath that Reveal Sound will put CV in ReSpire, that could really transform that device.
I have not had time to look at Kron and what it really has extra to offer.
How much more Res do you want? at the moment it's from -1 to 1 up to 5 decimal places.
PoohBear
-------------------------------------------------------------------------------------------------------
Recent Music made with Reason
(Electronic) Poly Madness
(Electronic) Solar Dance
(Electronic) Into The Night
(Upbeat) The Players Took Me There Made in Reason 9 with heavy use of the players
(Electronic) 5 Steps (Video added) Updated
------------------------------------------------------------------------------------------
My Soundcloud Page ....... Nektar Mappings
------------------------------------------------------------------------------------------
Sent from my XT1575 using Tapatalk
It seems like the resolution of the CV is high enough, it's just the knobs and the faders aren't fine enough sometimes. But the calculated CV is fine.
Sent from my XT1575 using Tapatalk
Sent from my XT1575 using Tapatalk
- Carly(Poohbear)
- Competition Winner
- Posts: 2871
- Joined: 25 Jan 2015
- Location: UK
One could argue that the other way around, what can Kron do that I can't do with other devices wired up?
Totally agree with that.etyrnal wrote:it's just the knobs and the faders aren't fine enough sometimes.
Bit depth of CV is very high, but sample rate is 1/64 from audio and this is not always good.
I want to switch with choosing before 2-3 positions (low, mid, hi frequencies), where low is 1/64 as now, mid is 1/16 and hi is 1/1 of audio sample rate.
Or simply low and hi switch.
I want to switch with choosing before 2-3 positions (low, mid, hi frequencies), where low is 1/64 as now, mid is 1/16 and hi is 1/1 of audio sample rate.
Or simply low and hi switch.
CV-Note resolution is limited to semitones (except A-Series 1 by Ochen K.).
- raccoonboy
- Posts: 471
- Joined: 22 Oct 2015
I guess sample rate is what I meant. For ultra snappy envelopes AND audio rate modulation
- raccoonboy
- Posts: 471
- Joined: 22 Oct 2015
Not necessarily osc if they could come up with their own format!pushedbutton wrote: ↑25 Oct 2017Aww but that would mean having to drop midi for osc. That's about as simple as replacing roadways with a series of tubes.
That already exists - it's up to the dev to implement it!raccoonboy wrote: ↑26 Oct 2017I guess sample rate is what I meant. For ultra snappy envelopes AND audio rate modulation
I've implemented it with the Selig Leveler (though I'm not sure anyone has found a use for it on that device), Pulsar has it, as does Pulveriser and others.
In other words, It's not up to the Props, they've already provided all that a dev needs to implement high sample (audio) rate CV!
Selig Audio, LLC
Semitones will interpret by device with CV Note socket, but resolution of CV is very very huge.
To make it clearer I will give an example. Most of knobs calibrated with MIDI resolution (0-127) have voltage values 0-1 V. But Reason allowed (with native devices like Thor) from -8 to +8 V. And some REs allowed from -10000 to +10000 V.
Carly(Poohbear) wrote:One could argue that the other way around, what can Kron do that I can't do with other devices wired up?
Totally agree with that.etyrnal wrote:it's just the knobs and the faders aren't fine enough sometimes.
Sent from my XT1575 using Tapatalk
Carly(Poohbear) wrote:One could argue that the other way around, what can Kron do that I can't do with other devices wired up?
You are reinforcing my point. If a person is not understanding what Kron can do, they're only scratching the surface of CV.
Sent from my XT1575 using Tapatalk
- Carly(Poohbear)
- Competition Winner
- Posts: 2871
- Joined: 25 Jan 2015
- Location: UK
Make a point then, what can Kron do that other devices linked together can't do?etyrnal wrote: ↑26 Oct 2017You are reinforcing my point. If a person is not understanding what Kron can do, they're only scratching the surface of CV.Carly(Poohbear) wrote:
One could argue that the other way around, what can Kron do that I can't do with other devices wired up?
Sent from my XT1575 using Tapatalk
- Carly(Poohbear)
- Competition Winner
- Posts: 2871
- Joined: 25 Jan 2015
- Location: UK
We should take this to a new thread, I'll start one.Carly(Poohbear) wrote: ↑26 Oct 2017Make a point then, what can Kron do that other devices linked together can't do?
- raccoonboy
- Posts: 471
- Joined: 22 Oct 2015
Literally just noticed this reply. Well that's cool. That will help when more people hopefully start having things to link the modular world to Reason .selig wrote: ↑26 Oct 2017That already exists - it's up to the dev to implement it!raccoonboy wrote: ↑26 Oct 2017I guess sample rate is what I meant. For ultra snappy envelopes AND audio rate modulation
I've implemented it with the Selig Leveler (though I'm not sure anyone has found a use for it on that device), Pulsar has it, as does Pulveriser and others.
In other words, It's not up to the Props, they've already provided all that a dev needs to implement high sample (audio) rate CV!
Does this mean you could do AM with your leveler?
AFAIK Viking 2 has aditional audio inputs for FM.
-
- Information
-
Who is online
Users browsing this forum: No registered users and 9 guests