ReasonTalk.com

Another feature I'd like to see in Reason is easier MIDI routing. I'd like to see MIDI Out/IN ports on the back of all the VI's, FX and players, and then be able to use MIDI cables like audio cables to route things via MIDI. This could come in handy in a number of ways.

Perhaps a MIDI rooting player? This player could include features like root specific MIDI channels out through CVs or merge MIDI channels, even multiple keyboard splits for each MIDI channel. This may give the flexibility you are after on any RE/VST.

In midi out u can choose midi port. Why not choose vst racks. So you can use midi out as an miditrack. That would be great.
I hope this come.

Sry for bad english

Folks have been asking for this since the beginning of Reason, if just because they gave us CV jacks and Audio jacks, so obviously why not MIDI jacks.

I mention this history because while folks have been asking for MIDI all along, there has never been any indication (and plenty of opportunities) this will ever happen. I think that ship has sailed at this point.

Luckily, I can now do almost the same thing with the Midi-CV Converter Player and PolyCV, so I’m done holding my breath waiting for MIDI jacks/cables in Reason and now enjoying routing note data around freely.


Sent from some crappy device using Tapatalk

selig wrote: ↑

12 Sep 2018

Folks have been asking for this since the beginning of Reason, if just because they gave us CV jacks and Audio jacks, so obviously why not MIDI jacks.

PH not extended yet potential of base MIDI router ontop of Reason since 1 version - advanced midi panel.

selig wrote:Folks have been asking for this since the beginning of Reason, if just because they gave us CV jacks and Audio jacks, so obviously why not MIDI jacks.

I mention this history because while folks have been asking for MIDI all along, there has never been any indication (and plenty of opportunities) this will ever happen. I think that ship has sailed at this point.

Luckily, I can now do almost the same thing with the Midi-CV Converter Player and PolyCV, so I’m done holding my breath waiting for MIDI jacks/cables in Reason and now enjoying routing note data around freely.


Sent from some crappy device using Tapatalk

Unfortunately performance data is not passed through such as Sustain, Pitchbend....

Sent from my ONEPLUS A5000 using Tapatalk

nscerri wrote:

selig wrote:Folks have been asking for this since the beginning of Reason, if just because they gave us CV jacks and Audio jacks, so obviously why not MIDI jacks.

I mention this history because while folks have been asking for MIDI all along, there has never been any indication (and plenty of opportunities) this will ever happen. I think that ship has sailed at this point.

Luckily, I can now do almost the same thing with the Midi-CV Converter Player and PolyCV, so I’m done holding my breath waiting for MIDI jacks/cables in Reason and now enjoying routing note data around freely.


Sent from some crappy device using Tapatalk

Unfortunately performance data is not passed through such as Sustain, Pitchbend....

Sent from my ONEPLUS A5000 using Tapatalk

Yes, that is still a big concern for me, and other developers wanting to take Players to the next level. Hopefully our voices have been heard…



Sent from some crappy device using Tapatalk

Route the clock to all available Midi Buses... !!!!!!!!

No Clock on all Midi_Outputs, NO MONEY!! I can wait !!!!

devilfish wrote: ↑

24 Jan 2019

Route the clock to all available Midi Buses... !!!!!!!!

No Clock on all Midi_Outputs, NO MONEY!! I can wait !!!!

Make the master host clock binnable to any given internal clock generator... that would make my day...
FYI, neither vcv or Reaktor or any other DAW out there got this..

devilfish wrote:Route the clock to all available Midi Buses... !!!!!!!!

No Clock on all Midi_Outputs, NO MONEY!! I can wait !!!!

I just ran into this limitation recently when adding hardware to my setup. The current limitation of sending clock out to only ONE output is extremely limiting IMO.

Also, would LOVE to be able to assign MIDI input to multiple destinations based on channel (hope I described this clearly). This would allow me to use my MIDI controller to address multiple instruments in the rack the same way I address multiple hardware instruments in my setup. Switching tracks is OK, but I can’t name those instruments in the controller or stack/split them as I can with hardware.


Sent from some crappy device using Tapatalk

selig wrote: ↑

26 Jan 2019

devilfish wrote:Route the clock to all available Midi Buses... !!!!!!!!

No Clock on all Midi_Outputs, NO MONEY!! I can wait !!!!

I just ran into this limitation recently when adding hardware to my setup. The current limitation of sending clock out to only ONE output is extremely limiting IMO.

Also, would LOVE to be able to assign MIDI input to multiple destinations based on channel (hope I described this clearly). This would allow me to use my MIDI controller to address multiple instruments in the rack the same way I address multiple hardware instruments in my setup. Switching tracks is OK, but I can’t name those instruments in the controller or stack/split them as I can with hardware.


Sent from some crappy device using Tapatalk

I ran into that when Reason 7 was released and I’m annoyed that it’s still a limitation in R10. I’m also disappointed about not being able to record while in slave mode. Most DAWs have these features in 2019. So I’m considering either Reaper or Logic for my hardware.

does this mean i carnt attach a matrix to a neutron whilst attaching a matrix to a volca fm

Hopefully it‘s available in Reason Version 11 ??

No Midi Update.. No Money !!

yes! midi routing! this is what i at first though ext midi instr could do. it would be so helpful. use different controllers with different instruments live...

the plugs i guess would just look like pronged midi jacks.

devilfish wrote: ↑

07 Feb 2019

Hopefully it‘s available in Reason Version 11 ??

No Midi Update.. No Money !!

So be it!

Resonator wrote:
I’m also disappointed about not being able to record while in slave mode. Most DAWs have these features in 2019. So I’m considering either Reaper or Logic for my hardware.

You CAN record in slave mode, you just have to hit “record” after playback begins. Not ideal but works for now.


Sent from my iPhone using Tapatalk

No one gave a crap about hardware when Reason v1 came out DAWs were the future. Now everyone is buying hardware again. Loads of cool affordable devices available. Reason could play great with this stuff but its surprisingly rooted in the box. Gotta keep up with the times!