Online mixing/mastering courses
Hey Reason community, my name is Brian and I'm new to the forum here. I've been a user of reason since reason 7, and am just now diving into the art of advanced mixing and mastering. I've watched countless hours of videos on YouTube about the subject, but I'm ready to take the art to the next level by taking classes or paying for instructional videos. Has anyone taken any classes or video instructions online that they highly recommend, or do not recommend? Or any other suggestions would be greatly appreciated! Cheers.
I went to college for audio engineering so I've never payed for online classes. However one resources that I've learned quite a bit from and that I recommend to everyone is The Recording Revolution (Graham Cochrane). https://www.recordingrevolution.com/
You may have come across his free videos on youtube (which are excellent) but he does also have some paid courses available. Again I haven't taken any of them, but going by his free stuff, it's probably great.
You may have come across his free videos on youtube (which are excellent) but he does also have some paid courses available. Again I haven't taken any of them, but going by his free stuff, it's probably great.
myopic amounts of minimalism will not save earth massive intervention will
Reason 12 ,gear4 music sdp3 stage piano .nektar gxp 88,behringer umc1800 .line6 spider4 30
hear scince reason 2.5
hear scince reason 2.5
- AttenuationHz
- Posts: 2048
- Joined: 20 Mar 2015
- Location: Back of the Rack-1
Umek has a tonne of videos I may purchase the rest of the videos at some point. $60 for a Master of Techno talking about his techniques. Here's the teaser which has a bunch of decent info.
Loads more videos on that site but not cheap, first hand info though!
Loads more videos on that site but not cheap, first hand info though!
It is not too much of an ask for people or things to be the best version of itself!
- AttenuationHz
- Posts: 2048
- Joined: 20 Mar 2015
- Location: Back of the Rack-1
Trial and error!
Should read the Ozone Manual lots of really great info in that, that is easily translated to cater for RE and VST formats.
http://downloads.izotope.com/guides/iZo ... hOzone.pdf
It is not too much of an ask for people or things to be the best version of itself!
-
- Posts: 304
- Joined: 17 Jan 2015
Try groove3.com... They have entire courses on mixing specifics like compression, EQ, delay, panning and more.
It's only $15 bucks a month or $150 for a whole year.
It's only $15 bucks a month or $150 for a whole year.
Midniite Music
My Gear: 2021 Macbook Pro M1/UA Volt 176 Interface/JBL Series 3, 8" Monitors/Akai MPK mini mk3/
My Gear: 2021 Macbook Pro M1/UA Volt 176 Interface/JBL Series 3, 8" Monitors/Akai MPK mini mk3/
- AttenuationHz
- Posts: 2048
- Joined: 20 Mar 2015
- Location: Back of the Rack-1
How much detail do they delve into? What is the video's like for instance would they state where to place specific instruments in an orchestra or just say this is the pan knob it goes left or right from the centre.FrankJaeger wrote: ↑12 Jan 2018Try groove3.com... They have entire courses on mixing specifics like compression, EQ, delay, panning and more.
It's only $15 bucks a month or $150 for a whole year.
It is not too much of an ask for people or things to be the best version of itself!
By watching someone else mix - not something that’s easy to do depending on where you live, but SO worth it even if you only get to do it a few times in your life.13121A1V wrote:Any other ways people have learned to mix/master?
Sent from some crappy device using Tapatalk
Selig Audio, LLC
- AttenuationHz
- Posts: 2048
- Joined: 20 Mar 2015
- Location: Back of the Rack-1
I'd second that watching someone else do it! Twitch is good for learning from watching someone else use a DAW. I like to watch the music and creativity channels on there from time to time you can really pick up a lot from observing others. You are looking at what they are doing and thinking why do it that way? While you are watching, if you can follow along and think of how you would do it also, obviously you can't change the way someone else would mix/use a DAW but you pick up a lot from them from possible making mistakes and doing it a much better way than you would.
It is not too much of an ask for people or things to be the best version of itself!
-
- Posts: 304
- Joined: 17 Jan 2015
I don't know about the panning series as I haven't watched it yet but the Compression Explained course for example (all courses are available with the all access pass) went into massive detail about the topic. They started off with a brief introduction of the course and then the second video called Audio Signal Anatomy jumped straight into what a waveform display is, what the zero crossing is, what the positive and negative swing of a waveform is, what the ADSR of the waveform is and explained things like what the transients of a sound are. They then went into dynamic range on the next video and a brief history of compressors (what they were originally used for and how that transitioned into today) with the follow-up video.AttenuationHz wrote: ↑12 Jan 2018How much detail do they delve into? What is the video's like for instance would they state where to place specific instruments in an orchestra or just say this is the pan knob it goes left or right from the centre.
The next video went into the 4 main types of compressors and how their circuitry work followed by a video on what the threshold, ratio and make-up gain are and how to use them. In a later video they cover the other types of compressors like the multiband.
They proceed this way until all of the knobs, buttons and doodads are covered in detail and promptly move on to USING compression in your mixes. They follow that with using compression during mastering to rap up the series. I can only assume that the panning course is just as detailed.
All of their videos are short, sweet and straight to the point with minimal fluff and usually last anywhere from 1 minute to 15-20 minutes depending on the sub topic they are covering.
They don't just have mixing and mastering courses either. They have full [Insert DAW here] explained courses for someone who is a beginner to learn their DAW from the ground up. They have specific plugin courses like the Waves Gold Bundle, DJ'ing with Traktor courses, A very detailed Music Theory course (with ear training included) and tons of others. I would seriously give the All Access Pass a shot for just $15 for 30 days and see how much you can learn within that timeframe. If you like what you find out then great, if not their cancelling process is very simple and you retain your access for the remaining days until that billing cycle is over.
DISCLAIMER: I'm in no way affiliated with groove3.com other than being a happy customer who's seizing the opportunity to help someone else make better music.
Midniite Music
My Gear: 2021 Macbook Pro M1/UA Volt 176 Interface/JBL Series 3, 8" Monitors/Akai MPK mini mk3/
My Gear: 2021 Macbook Pro M1/UA Volt 176 Interface/JBL Series 3, 8" Monitors/Akai MPK mini mk3/
-
- Posts: 3760
- Joined: 20 Oct 2017
- Location: Norway
- Contact:
Groove 3 seems interesting, and I have also been eyeing ASKAudio, anyone has any experience with their courses? The level of detail and quality?
Welcome Brian,
There are some good mixing tutorial series with the SSL. This guy has done a whole bunch of them and there are these two parts that are interesting too.
Mixing and mastering is whole other level of huh? So many different external influences to screw up a final track.
Anyway enjoy the forum and ask away.
There are some good mixing tutorial series with the SSL. This guy has done a whole bunch of them and there are these two parts that are interesting too.
Mixing and mastering is whole other level of huh? So many different external influences to screw up a final track.
Anyway enjoy the forum and ask away.
Tend the flame
-
- Information
-
Who is online
Users browsing this forum: No registered users and 16 guests