I saw a question recently asking how to convert the EQ settings in the 14:2 ReMix mixer in Reason (Improved EQ setting), and realized I could try to match them using FuzzMeasure and post the settings here. I hope some will find this useful!
First off, the ranges of the SSL EQ don't quite match the settings on the ReMix EQ, mostly on the low end (the SSL EQ doesn't go as low as the ReMix EQ. I'll post comparison frequency plots so you can see how close these settings will get you.
So where to start - I decided to plot the ReMix EQ in steps of 16, giving us a total of 8 plots for each band (4 cuts, 4 boosts). From there you can easily estimate/interpolate intermediate settings. Again, this won't give you a perfect match, but it will get you a "close enough" starting point.
So here is the data:
LOW:
ReMix Low -64
=SSL Low -19.37/40Hz
ReMix Low -48
=SSL Low -14.60/40Hz
ReMix Low -32
=SSL Low -9.84/40Hz
ReMix Low -16
=SSL Low -5.08/40Hz
ReMix Low +16
=SSL Low +5.08/40Hz
ReMix Low +32
=SSL Low +9.84/40Hz
ReMix Low +48
=SSL Low +14.60/40Hz
ReMix Low +63
=SSL Low +19.37/40Hz
HIGH:
ReMix High -64
=SSL High -20.00/13.00kHz
ReMix High -48
=SSL High -15.24/13.00kHz
ReMix High -32
=SSL High -10.60/13.00kHz
ReMix High -16
=SSL High -5.08/13.00kHz
ReMix High +16
=SSL High +5.08/13.00kHz
ReMix High +32
=SSL High +10.60/13.00kHz
ReMix High +48
=SSL High +15.24/13.00kHz
ReMix High +63
SSL High +20.00/13.00kHz
Converting 14:2 ReMix EQ to SSL EQ in Reason
- submonsterz
- Posts: 989
- Joined: 07 Feb 2015
That's quite handy to have thanks.selig wrote: ↑23 Jun 2017I saw a question recently asking how to convert the EQ settings in the 14:2 ReMix mixer in Reason (Improved EQ setting), and realized I could try to match them using FuzzMeasure and post the settings here. I hope some will find this useful!
First off, the ranges of the SSL EQ don't quite match the settings on the ReMix EQ, mostly on the low end (the SSL EQ doesn't go as low as the ReMix EQ. I'll post comparison frequency plots so you can see how close these settings will get you.
So where to start - I decided to plot the ReMix EQ in steps of 16, giving us a total of 8 plots for each band (4 cuts, 4 boosts). From there you can easily estimate/interpolate intermediate settings. Again, this won't give you a perfect match, but it will get you a "close enough" starting point.
So here is the data:
LOW:
ReMix Low -64
=SSL Low -19.37/40Hz
ReMix Low -48
=SSL Low -14.60/40Hz
ReMix Low -32
=SSL Low -9.84/40Hz
ReMix Low -16
=SSL Low -5.08/40Hz
ReMix Low +16
=SSL Low +5.08/40Hz
ReMix Low +32
=SSL Low +9.84/40Hz
ReMix Low +48
=SSL Low +14.60/40Hz
ReMix Low +63
=SSL Low +19.37/40Hz
HIGH:
ReMix High -64
=SSL High -20.00/13.00kHz
ReMix High -48
=SSL High -15.24/13.00kHz
ReMix High -32
=SSL High -10.60/13.00kHz
ReMix High -16
=SSL High -5.08/13.00kHz
ReMix High +16
=SSL High +5.08/13.00kHz
ReMix High +32
=SSL High +10.60/13.00kHz
ReMix High +48
=SSL High +15.24/13.00kHz
ReMix High +63
SSL High +20.00/13.00kHz
But up till now rather doing the work you just did
I was just unplugging the main mixer or linked mixers and just copying them over as many times I had tracks and just plugging them into Thier own mix channels .
The 14.2 is surprisingly efficient on DSP so it didn't really make a dent on my system.
But in future I'll probally use this guide as reference as it's something as I say never bothered working out for some strange reason .
Thanks this will make things a little easier and less cluttered.
See I do give credit when due . And appreciate time spent on something I just wouldn't had bothered getting round to myself
P.s
This is worthy of a sticky me thinks.
This information comes just in time. I was wondering how to do it in a structured way. Thanks.
Windows 10 64-bit | Reason 9.5 | Live 10 Suite + Push2 | Intel i7 8700K | 16 GB RAM | Scarlett 6x6 | Arturia MiniLab MK II | 2x Novation LaunchControl XL
Another older post on the same topic:
viewtopic.php?f=5&t=7492536
viewtopic.php?f=5&t=7492536
- Marco Raaphorst
- Posts: 2504
- Joined: 22 Jan 2015
- Location: The Hague, The Netherlands
- Contact:
Yes. That's why I still use a Combi which uses the ReMix EQ just for the EQ.
By the way, I compared the positions of the mixer's sends 14: 2 and ssl in 2011.
Even the old diagram was preserved
Red line for sends of channel strip, Black line for sends of Mixer 14:2.
It was very coarse measurement, just for understanding.
Even the old diagram was preserved
Red line for sends of channel strip, Black line for sends of Mixer 14:2.
It was very coarse measurement, just for understanding.
-
- Information
-
Who is online
Users browsing this forum: No registered users and 5 guests