VPS Avenger updated to 1.4.2

[EnochLight]

Check your accounts (you'll need to go there to get the new R5 content bank with new preset updates):

Account link: https://register.vps-avenger.com/

You can hit the VMAN button on the lower left below the pitch bend wheel, log into your account, and download the actual plugin update (and any XP's you won) from there within the actual plugin while it's running. If the VMAN button isn't showing, you're on an old version and should just get it from your account linked to above.

Here's the changelog:

https://www.vengeance-sound.com/plugins ... %20Avenger

1.4.2 hotfix
- fixed a problem with arp notes did ignore legato
- fixed a problem with poly legato split zone load/save

1.4.1 - minor fixes
- minor internal changes to fix the crash on preset save.
- sorting folder list for multisample import
- fixed a small issue with multisample-conversion for sample-stacker
- fixed a issue with changing chorder-arp presets would stop arp playback
- fixed note-hang issue
- adjusted font-brightness in the fx-section for the vintage skin

1.4.0 - Chord - ARP update
ARP:
- added new Arpeggiator module: Chord Mode
- added Per-Note strumming for ARP Chord and Poly mode
- added ARP octave shift-button (or chord interval/variation shift in chord mode )
- added selection capabilities to the ARP (hold shift to draw a box and select multiple items)
- added copy/paste 1st or 2nd half of an ARP pattern
- added ARP Humanize function (randomly shifts notes positive AND negative in time)
- ARP: added chord detection as "fixed note mode" where only the base note of a pressed chord is played. Perfect for bass adds to pads or SQs.
- fixed an issue with ARP patternmode poly fixed note
- fixed an issue with ARP fixed note octaves parameter not working properly
- fixed an issue with displaying arp pattern modulation in negative direction

Others:
- added a new free skin: Vintage Skin for Avenger by SatYa Tunes
- added new FX type: Clipper (Distortion)
- added new FX type: VMS Stereo Expander
- added new FX type: VMS Stereo Shifter
- improved UNDO for removing a FX from a send slot, which could affect OSC/Drums routing
- changed OSC-sound browser preview. its playing 1sec with a single click, if the file is longer, hold the mouse button to preview longer than 1sec
- added scrolling target texts in the mod matrix when the text is longer than the textbox
- fixed a issue with noise-phase lock when using a lower noise-sample rate.
- fixed an issue with tempo-update in the Trancegate
- fixed an issue with Pitch Bend and value mapping.
- fixed some memory leaks related to VMAN
- fixed a crash when GUI vanished after initializing the preset ( very rare )
- OSC Transpose dial has a improved scale when using the mouse-wheel. Now changes 12 semitones or 1 semitone when using shift mouse-wheel
- GRANULAR: added "Convert To Granular" to context on the Granular-Sample display. Rightclick to open the context. File will be loaded automatically to the OSC after conversion. This is only available on User-Samples, when the source-file is available.

- the minigame "MIDIWARS", which was exclusively in the 8/16Bit XPs is now available for everyone

also updated Factory Content to R5!
hundreds of new presets for ARP (chord mode), FX chains, Mod Env, FX, etc...

1.3.5
- added new function for DRUM-SQ: "REVERSE SAMPLE". You can access it in the ROLL-MODE context. That will playback the sample reverse. The tempo anchor point is the Step next to, where the arrow will point at
- added Shape for a MOD entry / slot in the MOD MATRIX. With that function you can additionaly shape the modulation value before if modifies the target.

- added new LFO Parameter: "Synced Mod." When this is turned on, rate changes via modulation will be synced to your Song BPM, meant it will switch the Rate only at full cycle values to stay in sync. So a 32th to 8th wobble will always sound tight in your mix.
- added "CLEAR" button to DrumSQ. Clears all notes
- added UNDO for preset load. If you accidentially load a preset, you can un-do this.
- added COPY/PASTE for FX settings, now you can copy FX specific settings from one instance of an insert FX to another instance
- added ENDLESS BASS Mode playing the octaves from the ARP. Endless Bass Mode also only takes 1/1 voice now in the Voices page / global voice limit.
- added ARP shuffle is now working correct on pattern lenghts that are not related to 4/4 ( esp. odd pattern lengths, i.e. length 9 or length 7)
- added KEYTRACK to insert FX: Filter. Good if you want to use the new Comb filter for example on the master sum or an effect bus.
- added visual feedback for inner dials (i.e. OSC PAN, Noise color etc...)
- added visual feedback for the OSC's HP/LP Filter bar
- added phase-lock for OSC Noise, very handy for static attack-noises (Drum sound design)
- added OSC-endless bass mode as mod target
- added: quick assign drum slots to aux or specific FX bus. Now you can route all AUX Outputs with 1 click
- changed: loading a ModEnv preset does not chagne the trigger-mode anymore
- changed: preset search->added VARIOUS folder to author context where authors with less than 10 presets are listed
- fixed issue with solo-ed sample stacker after loading a new sample to a stacker slot where all slots were audible again
- fixed DrumSQ. leftClick CNTRL to move the event free from the bpm-grid. Was working before but the note had to be selected first - now its easier to use. Great for Humanized Drum patterns
- fixed drum kit route gain-slider
- fixed a issue in AAX format where not all AUX outputs were processed correct.
- fixed an issue with resample/wavetable beat selector which was working only for OSC1
- fixed wandering crossFM attack sound
- fixed StepSQ clicks in stereo mode when stereo width is not 100%
- fixed an issue where granular-env position-dot did display the position of OSC1 even if OSC2 was selected
- fixed an issue where custom-samples was not stored correct in the sample-stacker
- fixed an issue with insert FX Filter "inertia". Now the insert FX: Filter is much faster for modulations.
- fixed an issue with Arp clock mode "first note" and play with multiple patterns where the arp did start at pattern A but B should have been already reached.
- fixed an issue in the mod matrix. modulating the strength of an slot using a per-voice-source where the target of the modulated slot is not per-voice
- fixed: changing StepSQ state and stepSQ module on multiple-selected drumSlots does not work
- fixed: mod-matrix slot strength modulation "bar" showed wrong value if mod add was used to modulate the strength
- fixed: granular-envelope speed mode wsa not saved/loaded correct
- fixed: crash when removing ARP1 after ARP2 was created.
- fixed a scrolling issue, when adding a new target/source to a quite full modmatrix
- fixed retriggering voices on chorder on/off and active legato
- VMAN: fixed: expansion not visible after downloading and importing it via VMAN
- VMAN: fixed: wrong folder for VMAN bitmap cache on MAC OS
- tons of minor bugfixes and imporovements

1.3.4
- added VMANAGER(beta) to manage the expansions in your account.
- added snap for ARP Pattern length
- improved preset search startup (loading a index list from harddrive so that it must not be created each time the plugin is started)
- fixed a issue for OSX GUI implementation that caused a very highg CPU usage
- fixed a crash caused by the COMB KEY filter
- fixed a tuning error for C-3...D#-3
- fixed some memory leaks
- fixed a issue where arp pattern length 16 could result in length 17
- fixed a issue that caused the routing display to show "#ERROR" after initalizing a OSC and disabling a filter-route
- fixed a problem with pitch-steps-parameter calulation
- fixed a click-noise at sample loops points (introduced with 1.3.0)
- fixed a issue where removing a module could cause a routing into a module of the same type for two times. ( i.e. 2x shaper1 when removing shaper 2)
- fixed a issue with DelayFX-Kill Feedback if it is pressed manualy and is modified via the mod matrix could cause a CPU spike

[Despondo]

Thanks for letting us know. Updating now.