Bounce Mix to Mono?

This forum is for discussing Reason. Questions, answers, ideas, and opinions... all apply.
crantle
Posts: 4
Joined: 19 May 2020

Post 11 Sep 2021

I work on a lot of sound design for talk-heavy podcasts -- and the desired output is almost always a mono audio file.

I'm not seeing any way to directly mono bounce from the master bus in Reason 12, and I have noticed a lot of similar complaints/feature requests across this forum.

It's looking like my workflow, if I continue to use Reason for these projects, is:

1. Bounce my mix (forced stereo)
2. Convert to mono in Audacity
3. Import into Reason to master, then bounce (forced stereo)
4. Convert to mono in Audacity for final delivery

I'm really hoping I am missing some basic functionality, or there's a rack extension out there which can perform this simple export function directly in Reason (I'm happy to pay for this feature) ...and if not, what workflow would you suggest as a better workaround? Please feel free to tear apart my approach above!

deeplink
Posts: 482
Joined: 08 Jul 2020
Location: Dubai

Post 11 Sep 2021

Unplug the Right cable from the master output.

Or place the Mono Combinator Effect as an Insert.

crantle
Posts: 4
Joined: 19 May 2020

Post 11 Sep 2021

deeplink wrote:
11 Sep 2021
Unplug the Right cable from the master output.
This results in a stereo file with left channel audio only.
deeplink wrote:
11 Sep 2021
Or place the Mono Combinator Effect as an Insert.
The Combinator still feeds into the stereo master bus -- and any bouncing/exporting from here always results in a stereo file. Am I missing something?

User avatar
nooomy
Posts: 506
Joined: 16 Jan 2015

Post 11 Sep 2021

You can send everything to a buss channel and set width to 0. Or you can set the Mclass stereo width in the master and pull down the width to 0.

deeplink
Posts: 482
Joined: 08 Jul 2020
Location: Dubai

Post 11 Sep 2021

nooomy wrote:
11 Sep 2021
You can send everything to a buss channel and set width to 0. Or you can set the Mclass stereo width in the master and pull down the width to 0.
I think what OP is looking for is not a just a mono sound, rather the actual audio file is exported with a single mono channel only.

crantle
Posts: 4
Joined: 19 May 2020

Post 11 Sep 2021

deeplink wrote:
11 Sep 2021
nooomy wrote:
11 Sep 2021
You can send everything to a buss channel and set width to 0. Or you can set the Mclass stereo width in the master and pull down the width to 0.
I think what OP is looking for is not a just a mono sound, rather the actual audio file is exported with a single mono channel only.
Yes -- I can easily make Reason "sound" like a mono track (and do so often for stereo mixing), but I'm looking for a mono file output option from the master bus. It appears, after more forum perusing, that this is a very common feature request and is not possible from within Reason 12 at this time.

User avatar
moneykube
Posts: 2783
Joined: 15 Jan 2015

Post 11 Sep 2021

I have always wondered why this was / is not an option when bouncing... it surely should not be difficult to add this option > it is common in many daws and helpful for some tasks.
https://soundcloud.com/moneykube-qube/s ... d-playlist
Member Of The Awesome League Of Perpetuals -

User avatar
huggermugger
Posts: 126
Joined: 16 Jul 2021

Post 11 Sep 2021

crantle wrote:
11 Sep 2021
I work on a lot of sound design for talk-heavy podcasts -- and the desired output is almost always a mono audio file.

I'm not seeing any way to directly mono bounce from the master bus in Reason 12, and I have noticed a lot of similar complaints/feature requests across this forum.

It's looking like my workflow, if I continue to use Reason for these projects, is:

1. Bounce my mix (forced stereo)
2. Convert to mono in Audacity
3. Import into Reason to master, then bounce (forced stereo)
4. Convert to mono in Audacity for final delivery

I'm really hoping I am missing some basic functionality, or there's a rack extension out there which can perform this simple export function directly in Reason (I'm happy to pay for this feature) ...and if not, what workflow would you suggest as a better workaround? Please feel free to tear apart my approach above!
Why are you doing Step 2? Get the Mix where you want it but don't Bounce it. Instead, save the Project under a different name for the Master. Apply your mastering as needed. Then do Step 4.

PS By "forced stereo" I think maybe you mean 'dual mono'?

User avatar
stratatonic
Posts: 1365
Joined: 15 Jan 2015
Location: CANADA

Post 11 Sep 2021

crantle wrote:
11 Sep 2021
I work on a lot of sound design for talk-heavy podcasts -- and the desired output is almost always a mono audio file.

I'm not seeing any way to directly mono bounce from the master bus in Reason 12, and I have noticed a lot of similar complaints/feature requests across this forum.

It's looking like my workflow, if I continue to use Reason for these projects, is:

1. Bounce my mix (forced stereo)
2. Convert to mono in Audacity
3. Import into Reason to master, then bounce (forced stereo)
4. Convert to mono in Audacity for final delivery

I'm really hoping I am missing some basic functionality, or there's a rack extension out there which can perform this simple export function directly in Reason (I'm happy to pay for this feature) ...and if not, what workflow would you suggest as a better workaround? Please feel free to tear apart my approach above!
Does this work for you?:
Setup:
Add a Mix Channel Directly below the Master Outs - Call it MONO OUT
Stick an Ozone Maximizer (or whatever you use) between the two.
Connect L Master Section OUT to L Ozone IN
Ozone L OUT to Mix Channel IN L/MONO
Direct Out L from Mix Channel to OUT above the Master Section

File>>Bounce Mixer Channels>select MONO OUT and "All Except Fader Section"

You should get a mono output file.

User avatar
nooomy
Posts: 506
Joined: 16 Jan 2015

Post 11 Sep 2021

crantle wrote:
11 Sep 2021
I work on a lot of sound design for talk-heavy podcasts -- and the desired output is almost always a mono audio file.

I'm not seeing any way to directly mono bounce from the master bus in Reason 12, and I have noticed a lot of similar complaints/feature requests across this forum.

It's looking like my workflow, if I continue to use Reason for these projects, is:

1. Bounce my mix (forced stereo)
2. Convert to mono in Audacity
3. Import into Reason to master, then bounce (forced stereo)
4. Convert to mono in Audacity for final delivery

I'm really hoping I am missing some basic functionality, or there's a rack extension out there which can perform this simple export function directly in Reason (I'm happy to pay for this feature) ...and if not, what workflow would you suggest as a better workaround? Please feel free to tear apart my approach above!
Why do you have to monofy Two times and to master?

Isn’t it enough to just mono it as a last step ?

User avatar
fullforce
Posts: 506
Joined: 18 Aug 2018

Post 11 Sep 2021

Selig Gain?
This is a block of text that can be added to posts you make. There is a 255 character limit.

User avatar
Hazel
Posts: 32
Joined: 29 Sep 2016

Post 12 Sep 2021

The Quadelectra Stereo Spliter has a mono setting and it's a 9$ RE. Not sure if this helps what you are trying to achieve or not.

User avatar
Aquila
Posts: 644
Joined: 21 Jan 2015

Post 13 Sep 2021

Hazel wrote:
12 Sep 2021
The Quadelectra Stereo Spliter has a mono setting and it's a 9$ RE. Not sure if this helps what you are trying to achieve or not.
Not quite. To clarify, the OP wants to export a single channel (mono) audio file. Reason only exports dual channel (stereo). No amount of plugins or processing can change the export process.

User avatar
selig
RE Developer
Posts: 9458
Joined: 15 Jan 2015
Location: The NorthWoods, CT, USA

Post 13 Sep 2021

stratatonic wrote:
11 Sep 2021
!
Does this work for you?:
Setup:
Add a Mix Channel Directly below the Master Outs - Call it MONO OUT
Stick an Ozone Maximizer (or whatever you use) between the two.
Connect L Master Section OUT to L Ozone IN
Ozone L OUT to Mix Channel IN L/MONO
Direct Out L from Mix Channel to OUT above the Master Section

File>>Bounce Mixer Channels>select MONO OUT and "All Except Fader Section"

You should get a mono output file.
That works, or you can even put the extra Mix Channel after the master section - the key is to remove the right channel on the mono output, wherever you put it!
No reason for all the confusion over the years IMO…every time I’ve seen this question asked the correct answer has been given,
Selig Audio, LLC

User avatar
stratatonic
Posts: 1365
Joined: 15 Jan 2015
Location: CANADA

Post 14 Sep 2021

selig wrote:
13 Sep 2021
stratatonic wrote:
11 Sep 2021
!
Does this work for you?:
Setup:
Add a Mix Channel Directly below the Master Outs - Call it MONO OUT
Stick an Ozone Maximizer (or whatever you use) between the two.
Connect L Master Section OUT to L Ozone IN
Ozone L OUT to Mix Channel IN L/MONO
Direct Out L from Mix Channel to OUT above the Master Section

File>>Bounce Mixer Channels>select MONO OUT and "All Except Fader Section"

You should get a mono output file.
That works, or you can even put the extra Mix Channel after the master section
In my example , I did :)
selig wrote:
13 Sep 2021
- the key is to remove the right channel on the mono output, wherever you put it!
No reason for all the confusion over the years IMO…every time I’ve seen this question asked the correct answer has been given,
I assumed that that OP wanted to bounce out a mix of his project. For zero future confusion though, I do think that there should be a MONO button on the mixer to make it really flipping simple though.

My way (I think) is the only way you can get your entire mix out in mono through the Master Section, but you have to mess around in the back with a few devices and cabling.

Even simpler, depending on the size of your project, I suppose you could buss your tracks you wanted out, level your mix, stick in a Selig Gain on the buss, set to mono, unplug the R cable and the bounce the buss.
Maybe you could also put a Selig Gain in one of the sends, mono on, unplug R, and adjust your mix thru sends and bounce the send.

  • Information
  • Who is online

    Users browsing this forum: Carpainter, CommonCrawl [Bot], False Mirror, fullforce, guitfnky, gullum, Italophile, Nocturn789 and 7 guests