Ok, so I just finished a song, and something weird happened. I had a bunch of vocal tracks, and only one of them had reverb and delay effects on it, via a send.
When I routed the whole group to a new output bus, both these effects were gone in the new bus. Now, was this supposed to happen or not? Thanks for your input.
Also, please check out my new song, in my signature.
Routed to a new output bus and send effects GONE.
-
- Posts: 49
- Joined: 04 Mar 2017
I'm attaching 2 screen captures of my session. One showing my vocal tracks with all the tracks soloed, as the vocal bus track is being soloed.
The other picture is of all the busses, and the tracks for the reverb send and delay send, both soloed.
I find that I have to increase the wet amount on the original main vocal track on both the reverb and the delay, to get close to what they were before I routed all the vocals to the vocal bus. If I turn on the reverb and delay on the vocal bus, then all the vocals receive the effects, which I didn't want.
What's going on here? I only want my main vocal having the reverb and delay. What can I do?
- Attachments
-
- Vocal bus, reverb track, and delay track soloed. When doing this, you can not hear the effects unless you increase the amount of the reverb and delay on the original main vocal track to the maximum.
- Screen Shot 2018-02-18 at 8.11.34 PM.png (181.54 KiB) Viewed 1831 times
-
- all Vocal tracks soloed because vocal bus is soloed. Note I have a send to reverb and delay, only to my main vocal.
- Screen Shot 2018-02-18 at 8.10.03 PM.png (125.82 KiB) Viewed 1831 times
-
- Posts: 49
- Joined: 04 Mar 2017
Here is a screen shot of the routing from effects send to Master return. As you see, I give each effect a mix channel with the direct out from the mix channel going to the master return.
- Attachments
-
- Screen Shot 2018-02-18 at 8.52.17 PM.png (583.13 KiB) Viewed 1788 times
-
- Posts: 49
- Joined: 04 Mar 2017
I've discovered this old Youtube video from the Props from 2012, and their method seems to be to not include connecting the Direct outs from the mix channels to the Master returns, but just connecting the side effect outputs to the mix channel inputs.
This maybe what's causing the problem. I'll experiment further and see.
This maybe what's causing the problem. I'll experiment further and see.
-
- Information
-
Who is online
Users browsing this forum: Yandex [Bot] and 19 guests