Hi,
Just wondering if anyone could tell med what I'm doing wrong?
Setup 1: BCF -> Trough midi---- Focusrite 18i20 -> Mac = No success. Reason doesn't find the BCF2000.
Setup 2: BCF -> Trough USB -> Mac... = Success, party-party time!
..But I need the USB slot for something completely different. Any tips on how to succeed with setup 1?
BCF2000 troubles
Easy 3 step solution:
1 - Get USB HUB!
2 - Connect BCF2000 and the other "stuff" to the hub.
3 - Be happy!
1 - Get USB HUB!
2 - Connect BCF2000 and the other "stuff" to the hub.
3 - Be happy!
Thanks Normen! The manual says I have to press Edit and Store toghether to enter Global setup Menu, but nothing happens.normen wrote:You have to set it to standalone mode, see manual section 4.1.1
Any last resorts? Tried with/without USB/midi connected, and in "Mackie-mode".
.. Seems like this is the way to go, now I have to find a reliable USB hub..mcatalao wrote:Easy 3 step solution:
1 - Get USB HUB!
2 - Connect BCF2000 and the other "stuff" to the hub.
3 - Be happy!
Wensell,
Best option is using normal bcf mode with USB, because the remote maps were made for that mode.
If you use the Mackie Mode... I really don't know what reason recognizes.
About the hub, if you're either using an audio interface or a hard drive over it, then you should find the best hub possible.
Good Luck!
Best option is using normal bcf mode with USB, because the remote maps were made for that mode.
If you use the Mackie Mode... I really don't know what reason recognizes.
About the hub, if you're either using an audio interface or a hard drive over it, then you should find the best hub possible.
Good Luck!
-
- Information
-
Who is online
Users browsing this forum: Trendiction [Bot] and 5 guests