ReasonTalk.com

Reasonable man wrote: ↑

18 Jan 2020

Hi Poobear can i just clarify...or anyone that can answer

I have no doubt that is is a silly question but where the panomora maps are stored on computer there are two files ... 'Panorama remote map and 'Panorama mixer mode remote map'. Do you just change out the 'Panorama remote map' and leave the 'Panorama mixer mode map' alone?
Thanks

geronimo wrote: ↑

02 Feb 2020

Same thing with my P6: so much so that I no longer use this motorized fader.

EnochLight wrote: ↑

02 Feb 2020

Damn - is it me or have the motorized faders always moved really grinding this bad in one direction? It's a lot smoother going down than up!

EnochLight wrote: ↑

02 Feb 2020

geronimo wrote: ↑

02 Feb 2020

Same thing with my P6: so much so that I no longer use this motorized fader.

I picked up some canned air and electronics contact cleaner. Blew out the fader slot with air really good, then hit it with contact cleaner. Mechanically moved the fader up and down two dozen times, then took a microfiber cloth (such as the kind that came with the Panorama to clean the screen) and used a thin piece of plastic to mechanically wipe the excess cleaner off of the fader track.

geronimo wrote: ↑

09 Feb 2020

EnochLight wrote: ↑

02 Feb 2020

I picked up some canned air and electronics contact cleaner. Blew out the fader slot with air really good, then hit it with contact cleaner. Mechanically moved the fader up and down two dozen times, then took a microfiber cloth (such as the kind that came with the Panorama to clean the screen) and used a thin piece of plastic to mechanically wipe the excess cleaner off of the fader track.

So shouldn't I do this?

futureworld wrote: ↑

25 Feb 2020

Hey Pooh Bear,

Thank you so much! You're awesome! I have an issue - I'm looking to have Serum fully controllable. The current mappings are very limited. On Nektarine they have the full mappings in a good order. My P1 isnt syncing with Nektarine properly, I can't control the plugin with in, I just got P1 yesterday and emailed customer support. But I'd like the mapping to be there without Nektarine (cust. service told me mapping file needs to be updated to achieve this), am suspicious Nektarine adds to latency and don't want that.

I want to add that to the preset mapping file that you made which I used , thanks for that again! Since it's already mapped on Nektarine is there an easier way, or can you give me any help to add it to the mapping? I'll learn the basic coding if I have to but I'm not coding guy so might take me a long time haha, already been at this issue 12 plus hours and watched several of your videos! Thanks for those too and I greatly appreciate and await your response,

Kyle Wagner

djs wrote: ↑

08 Apr 2020

If we use these Remotemaps, is there a need for the Nektarine software?

Carly(Poohbear) wrote: ↑

08 Apr 2020

djs wrote: ↑

08 Apr 2020

If we use these Remotemaps, is there a need for the Nektarine software?

Nektarine will allow you to map your own customised map..

MrFigg wrote: ↑

11 Oct 2020

Here's something weird that sometimes happens on my T4. I drag an instrument in and the keyboard maps to it. Then I drag a new instrument on top of the old instrument to replace the first one and it doesn't map at all. Maybe that's normal?

Carly(Poohbear) wrote: ↑

11 Oct 2020

MrFigg wrote: ↑

11 Oct 2020

Here's something weird that sometimes happens on my T4. I drag an instrument in and the keyboard maps to it. Then I drag a new instrument on top of the old instrument to replace the first one and it doesn't map at all. Maybe that's normal?

No that is not normal, both my P's and T's change the mapping to the correct instrument...

Carly(Poohbear) wrote: ↑

05 Dec 2017

Carly(Poohbear) wrote: ↑

29 Nov 2017

If any of you want to follow this video I will make the mapping Omnisphere 2 for you...

I don't think this one can be mapped, I created a mapping to work with the grab functionality. You are limited to about 500 controls.
However You have to enable the control manually in Omnisphere then you can grab it, Hmmm.

Found this note.
All Host Automation assignments are stored with the Multi, saved with the host project file, and can also be saved with a MIDI Learn Template.

NOTE: You can enable up to 256 Host Automation parameters. If you need more than 256 assignments, consider using MIDI Learn together with Host Automation.

Technical Considerations

There are 256 parameter slots in Omnisphere that can be automated, numbered from 0 to 256. These slots correspond to the list of parameters that can be automated in the host or on your control surface. For example, slot 0 is the first parameter in the host or on the control surface, the next one is number 1, etc. You can assign any parameter in Omnisphere to one of these slots using "Enable Host Automation". The parameter will be assigned to the next available slot and may then be automated from the host or control surface. Automation ID numbers correspond to the ordered list of parameters that can be automated in the host or on a control surface.

Parameter automation is capable of two-way communication. If your host and control surface support it, your control surface can display the names of the parameters controlled by each knob or fader, and each control can automatically update to show the current value of a parameter. For example, Mackie Control displays and automatically updates parameter names in real time. Motorized faders can move to show the current values of parameters, which is very useful when opening songs that contain plug-ins controlled by the surface.

Some hosts have a limit on the number of parameters that are available to be Host Automated. For example, some only permit the first 128 parameters of a plug-in to be automated. In others, the limit is 1024 parameters. By comparison, Omnisphere has nearly 20,000 parameters!

If you're working in a host that limits the number of automation parameters, you can also use the MIDI Learn feature of Omnisphere to automate Omnisphere's parameters. The combination of Host Automation and MIDI Learn gives you powerful real-time control of virtually every parameter of Omnisphere.

wendylou wrote: ↑

27 Oct 2020

Carly(Poohbear) wrote: ↑

05 Dec 2017

I don't think this one can be mapped, I created a mapping to work with the grab functionality. You are limited to about 500 controls.
However You have to enable the control manually in Omnisphere then you can grab it, Hmmm.

I purchased Omnisphere 2.6 recently and have had issues with grab functionality when using the Panorama Remote Map on Dropbox as discussed here. The only way I got grab to work is by reverting to Nektar's official P6 Remote map.

I did get and load the Nektar Template for Omnisphere, but I'm a little fuzzy on whether or not that is for Omnisphere's manual keyboard mapping system, or if it has any bearing on the Remote Grab functionality? It seems as if there are mutiple ways to skin the cat here. i.e. Remote grab, Load Template (provided by Nektar for Omnisphere), and custom Remote Map.

If I use the Remote Grab operation and do not use Carly's Remote Map with Omnisphere entries. then the grabbed parameters have no labels on Panorama P6, only values. And if I use Carly's Remote Map with Omnisphere entries, it shows the knobs and sliders via Pages, but has no programming per se, and it also does not allow Remote Grab to work. Another quirk I discovered is that when I am able to Remote Grab with Nektar's default Remote Map, Omnisphere control won't happen until you leave that Omnisphere screen tab and then return to the same screen, then I can control it.

Despite being able to do some Remote Grabs. I'm confused as to the role of Nektar's Template that get's loaded, and also why I can't use Remote Grabs when using the latest Remote Map from here? It's enough to make me want to forget controlling Omnisphere with Panorama P6.

wendylou wrote: ↑

27 Oct 2020

Thank you for the explanations. I loaded up your Remote Map and was able to grab and control Omnisphere. It seems I have to "Enable Host Automation" every time on each control in Omnisphere 2.6 before I can grab and assign on the P6 using Shift. Nevertheless, it works. Thanks!