Nektar Panorama Remote Maps Thread

Want to talk about music hardware or software that doesn't include Reason?
User avatar
AttenuationHz
Posts: 2048
Joined: 20 Mar 2015
Location: Back of the Rack-1

02 Aug 2017

Carly(Poohbear) wrote:
02 Aug 2017
AttenuationHz wrote:
01 Aug 2017
I swapped the Amp Envelope and Filter envelope pages around on the Subtractor. So filter displays on the left on faders 1-4 and amp is on the right faders 5-8. It's a little less confusing when looking at or if your used to how the subtractor layout is.

Two problems with the original mappings are
1) I think some of the mappings were done by someone who did not use the device and hence the layouts could be better (see your example).
2) with the Original mappings you don't know what is mapped to what unless you look at the mapping file or twist every knob, that's one of the reason I do the mappings the way I do it so you can flip from Knob to Fader to upper knob views.

Was the very last P1 mapping I posted error free? If so I will add it to the dropbox..
Which the zip with the fixed combinator error?
It is not too much of an ask for people or things to be the best version of itself!

User avatar
freddykr
Posts: 34
Joined: 29 Sep 2015
Location: Sweden

25 Aug 2017

If I want to play any synth from the pads of the Panorama how do one do this ?
In the manual it says to press the <Pads> key, but nothing...
I have played around with Pad-map and I can see the pad changes to the key pressed, still no sound...

User avatar
Carly(Poohbear)
Competition Winner
Posts: 2871
Joined: 25 Jan 2015
Location: UK

25 Aug 2017

freddykr wrote:
25 Aug 2017
If I want to play any synth from the pads of the Panorama how do one do this ?
In the manual it says to press the <Pads> key, but nothing...
I have played around with Pad-map and I can see the pad changes to the key pressed, still no sound...
you can just play them however your source will have to go low enough i.e. they start at C1

or remap them, hit the Pads, then Pad-map, Learn, hit the pad you want to change then hit a new key on the keyboard.

User avatar
freddykr
Posts: 34
Joined: 29 Sep 2015
Location: Sweden

26 Aug 2017

Carly(Poohbear) wrote:
freddykr wrote:
25 Aug 2017
If I want to play any synth from the pads of the Panorama how do one do this ?
In the manual it says to press the <Pads> key, but nothing...
I have played around with Pad-map and I can see the pad changes to the key pressed, still no sound...
you can just play them however your source will have to go low enough i.e. they start at C1

or remap them, hit the Pads, then Pad-map, Learn, hit the pad you want to change then hit a new key on the keyboard.
Yes this is how I do it, but it only works on Kong or redrum....

Sent from my ONEPLUS A3003 using Tapatalk


User avatar
Carly(Poohbear)
Competition Winner
Posts: 2871
Joined: 25 Jan 2015
Location: UK

26 Aug 2017

freddykr wrote:
26 Aug 2017
Carly(Poohbear) wrote:
you can just play them however your source will have to go low enough i.e. they start at C1

or remap them, hit the Pads, then Pad-map, Learn, hit the pad you want to change then hit a new key on the keyboard.
Yes this is how I do it, but it only works on Kong or redrum....

Sent from my ONEPLUS A3003 using Tapatalk
Mine works on everything I give focus to..

Hmm, it could be worth resetting your Nectar, i.e. Setup \ Load \ Preset 1 etc.

User avatar
freddykr
Posts: 34
Joined: 29 Sep 2015
Location: Sweden

26 Aug 2017

OK,
That was it did the Setup and so on, now it works :thumbs_up: :thumbs_up:

Thanks Poohbear !

okaino
Posts: 143
Joined: 04 Jan 2017

27 Aug 2017

Hey i was going through the thread...im interested in using remote maps....im even more interested right now with thr possibility to remap the transport window...i want to assign my playhead knob to bottom pan knobs 5 or 6...is this possible and how?

I tend to type better when im not on a phone.


okaino
Posts: 143
Joined: 04 Jan 2017

27 Aug 2017

Hey i was going through the thread...im interested in using remote maps....im even more interested right now with remapping the transport window....to adjust playhead to maybe knob 5 or 6 of pans. Is this possible?

I tend to type better when im not on a phone.


User avatar
Carly(Poohbear)
Competition Winner
Posts: 2871
Joined: 25 Jan 2015
Location: UK

27 Aug 2017

okaino wrote:
27 Aug 2017
Hey i was going through the thread...im interested in using remote maps....im even more interested right now with thr possibility to remap the transport window...i want to assign my playhead knob to bottom pan knobs 5 or 6...is this possible and how?

I tend to type better when im not on a phone.
It's in the Reason.document section in the Panorama Mixer Mode.remotemap.
Mixer Ch Knob 4 Song Position 3840
Just swap knob 4 and 5 around...

Personally looking at is I would move Left Loop Bar to 3, right Loop Bar to 4, Left Loop Beat to 7 and Right Loop Beat to 8

okaino
Posts: 143
Joined: 04 Jan 2017

27 Aug 2017

Carly(Poohbear) wrote:
okaino wrote:
27 Aug 2017
Hey i was going through the thread...im interested in using remote maps....im even more interested right now with thr possibility to remap the transport window...i want to assign my playhead knob to bottom pan knobs 5 or 6...is this possible and how?

I tend to type better when im not on a phone.
It's in the Reason.document section in the Panorama Mixer Mode.remotemap.
Mixer Ch Knob 4 Song Position 3840
Just swap knob 4 and 5 around...

Personally looking at is I would move Left Loop Bar to 3, right Loop Bar to 4, Left Loop Beat to 7 and Right Loop Beat to 8

Is it weird if i dont see it?Image

I tend to type better when im not on a phone.


User avatar
Carly(Poohbear)
Competition Winner
Posts: 2871
Joined: 25 Jan 2015
Location: UK

27 Aug 2017

okaino wrote:
27 Aug 2017
Carly(Poohbear) wrote:
It's in the Reason.document section in the Panorama Mixer Mode.remotemap.
Mixer Ch Knob 4 Song Position 3840
Just swap knob 4 and 5 around...

Personally looking at is I would move Left Loop Bar to 3, right Loop Bar to 4, Left Loop Beat to 7 and Right Loop Beat to 8

Is it weird if i dont see it?Image

I tend to type better when im not on a phone.
OSX: //Library/Application Support/Propellerhead Software/Remote/Maps/Nektar

okaino
Posts: 143
Joined: 04 Jan 2017

27 Aug 2017

Carly(Poohbear) wrote:
okaino wrote:
27 Aug 2017

Is it weird if i dont see it?Image

I tend to type better when im not on a phone.
OSX: //Library/Application Support/Propellerhead Software/Remote/Maps/Nektar
Ok found them in library....i then copied and pasted the code to text edit...i located the song position locator. My question is how do i change this parameter? Where do i make the change? And how do i upload map after i make changes? Thank you!ImageImage

I tend to type better when im not on a phone.


User avatar
Carly(Poohbear)
Competition Winner
Posts: 2871
Joined: 25 Jan 2015
Location: UK

27 Aug 2017

okaino wrote:
27 Aug 2017
Carly(Poohbear) wrote:
OSX: //Library/Application Support/Propellerhead Software/Remote/Maps/Nektar
Ok found them in library....i then copied and pasted the code to text edit...i located the song position locator. My question is how do i change this parameter? Where do i make the change? And how do i upload map after i make changes? Thank you!Image

I tend to type better when im not on a phone.
First of all make sure that your text editor support White spaces (tabs) if not you make the file unusable when you save it.
As I said I would swap the 3 and 4 with 5 and 6 (and make the old 5 and 6, 3 and 4) then save the file then restart your Nektar.

okaino
Posts: 143
Joined: 04 Jan 2017

27 Aug 2017

does anybody have a x code installer they wouldnt mind uploading that works for el capitain?

okaino
Posts: 143
Joined: 04 Jan 2017

29 Aug 2017

Carly(Poohbear) wrote:
okaino wrote:
27 Aug 2017
Ok found them in library....i then copied and pasted the code to text edit...i located the song position locator. My question is how do i change this parameter? Where do i make the change? And how do i upload map after i make changes? Thank you!Image

I tend to type better when im not on a phone.
First of all make sure that your text editor support White spaces (tabs) if not you make the file unusable when you save it.
As I said I would swap the 3 and 4 with 5 and 6 (and make the old 5 and 6, 3 and 4) then save the file then restart your Nektar.
Thanks i got xcode how do i get this unlocked?Image

I tend to type better when im not on a phone.


User avatar
Carly(Poohbear)
Competition Winner
Posts: 2871
Joined: 25 Jan 2015
Location: UK

29 Aug 2017

okaino wrote:
29 Aug 2017
Thanks i got xcode how do i get this unlocked?
I don't know Macs, Looks like permissions issues, have a google about unlocking files etc.

okaino
Posts: 143
Joined: 04 Jan 2017

29 Aug 2017

Carly(Poohbear) wrote:
29 Aug 2017
okaino wrote:
29 Aug 2017
Thanks i got xcode how do i get this unlocked?
I don't know Macs, Looks like permissions issues, have a google about unlocking files etc.
Thanks I got it. I figured out to use the remote maps copy everything in and replace it. Ive been able to successfully change a parameter. The other question i have is im able to change the 8 knobs on the top but i would like to put them on the 8 pan knob im not seeing how to do that. what menu option do i need to replace them in transport mode? Thanks!

User avatar
holocule
Posts: 42
Joined: 11 Jun 2017
Contact:

01 Sep 2017

hi can you use the remote mapping for vst as well ?

User avatar
Carly(Poohbear)
Competition Winner
Posts: 2871
Joined: 25 Jan 2015
Location: UK

01 Sep 2017

holocule wrote:
01 Sep 2017
hi can you use the remote mapping for vst as well ?
Yes we have done some for VST's already but they are not merged into the main map here...

User avatar
holocule
Posts: 42
Joined: 11 Jun 2017
Contact:

01 Sep 2017

Carly(Poohbear) wrote:
01 Sep 2017
holocule wrote:
01 Sep 2017
hi can you use the remote mapping for vst as well ?
Yes we have done some for VST's already but they are not merged into the main map here...
Cool, is there a way i can map a sylenth or serum to panorama?

User avatar
Carly(Poohbear)
Competition Winner
Posts: 2871
Joined: 25 Jan 2015
Location: UK

02 Sep 2017

holocule wrote:
01 Sep 2017
Carly(Poohbear) wrote:
01 Sep 2017


Yes we have done some for VST's already but they are not merged into the main map here...
Cool, is there a way i can map a sylenth or serum to panorama?
Have a look at this for starters

User avatar
holocule
Posts: 42
Joined: 11 Jun 2017
Contact:

02 Sep 2017

Carly(Poohbear) wrote:
02 Sep 2017
holocule wrote:
01 Sep 2017


Cool, is there a way i can map a sylenth or serum to panorama?
Have a look at this for starters
Amazing Thank You Very Much Most Helpful Cheers :)

User avatar
holocule
Posts: 42
Joined: 11 Jun 2017
Contact:

03 Sep 2017

Hi has anyone done remote mappings for the sylenth for the P1?

User avatar
EnochLight
Moderator
Posts: 8405
Joined: 17 Jan 2015
Location: Imladris

24 Sep 2017

Carly(Poohbear) wrote:
01 Sep 2017
holocule wrote:
01 Sep 2017
hi can you use the remote mapping for vst as well ?
Yes we have done some for VST's already but they are not merged into the main map here...
Carly - is there a place where we can get the Remote files that have already been done for said VST, or are they spread out over the 18 pages of this thread?
Win 10 | Ableton Live 11 Suite |  Reason 12 | i7 3770k @ 3.5 Ghz | 16 GB RAM | RME Babyface Pro | Akai MPC Live 2 & Akai Force | Roland System 8, MX1, TB3 | Dreadbox Typhon | Korg Minilogue XD

User avatar
Carly(Poohbear)
Competition Winner
Posts: 2871
Joined: 25 Jan 2015
Location: UK

24 Sep 2017

EnochLight wrote:
24 Sep 2017
Carly(Poohbear) wrote:
01 Sep 2017


Yes we have done some for VST's already but they are not merged into the main map here...
Carly - is there a place where we can get the Remote files that have already been done for said VST, or are they spread out over the 18 pages of this thread?
Yes, try this location there is a sub folder called VST
https://www.dropbox.com/sh/sberq7vvyfit ... T4sra?dl=0

Post Reply
  • Information
  • Who is online

    Users browsing this forum: No registered users and 12 guests