Gear for Sale (USA/FS) TR-808, Juno106, JX305, AN1X
I will revise with Pics and Description over next 24-72 Hours.
Due to legal litigatio
(fighting for a lot of $)
Not cracking the retirement egg.
Being a father and having a family.
Need to relieve some G.A.S.
I have for sale the following Gear.
Roland TR-808
Roland Juno106
Roland JX-305
Roland R8 >with SN-04 Card (The 1st 808 Samples)
Yamaha AN1X
Yamaha CS6X >>with AN150 & DX150 PLG installed.
Yamaha RX11
Dave Smith Instruments Prophet 8
Acidlab Miami
Presonus 16.0.2 With
Presonus FireStation
>Presonus Studio One Producer
Korg Electribe EMX1
Korg Volca Beats
Korg Super Section
Akai MPD 16
Circuit Bent Speak and Math
Elektroharmonix 8 Step
2x JBL 3428 with mic and software.
DBX PA1
More to come
Due to legal litigatio
(fighting for a lot of $)
Not cracking the retirement egg.
Being a father and having a family.
Need to relieve some G.A.S.
I have for sale the following Gear.
Roland TR-808
Roland Juno106
Roland JX-305
Roland R8 >with SN-04 Card (The 1st 808 Samples)
Yamaha AN1X
Yamaha CS6X >>with AN150 & DX150 PLG installed.
Yamaha RX11
Dave Smith Instruments Prophet 8
Acidlab Miami
Presonus 16.0.2 With
Presonus FireStation
>Presonus Studio One Producer
Korg Electribe EMX1
Korg Volca Beats
Korg Super Section
Akai MPD 16
Circuit Bent Speak and Math
Elektroharmonix 8 Step
2x JBL 3428 with mic and software.
DBX PA1
More to come
- Attachments
-
- 20150207_003512.jpg (2.48 MiB) Viewed 1748 times
If interested, pm a reasonable offer.
Only USA shipping?
Follow me on twitter! http://www.twitter.com/realfatcheese
And remember, blessed are the cheesemakers, and any manufacturers of dairy-based music !
Hell yeah E., you're a "cheesius".
And remember, blessed are the cheesemakers, and any manufacturers of dairy-based music !
Hell yeah E., you're a "cheesius".
CS6X is in Gorgeous Condition.
It's loaded with both AN150 and DX150.
All manuals, CC matrix,AN150 PLG Manual, Sysx Manual (dated software) for DX150 PLG.
I just got a new battery for the AN1X, planned on firing it, been a while.
Printed Manual, Yamaha Adapter.
Beautiful cosmetically .
*** Missing 1 Know off of Mode *** Where did that thing go.
It's loaded with both AN150 and DX150.
All manuals, CC matrix,AN150 PLG Manual, Sysx Manual (dated software) for DX150 PLG.
I just got a new battery for the AN1X, planned on firing it, been a while.
Printed Manual, Yamaha Adapter.
Beautiful cosmetically .
*** Missing 1 Know off of Mode *** Where did that thing go.
- Attachments
-
- 1423399553717.jpg (1.71 MiB) Viewed 1732 times
In the last 12 months I have shipped a package to Canada and even sold my Fizmo to a buyer from NYC twice then shipped straight to Germany.FATCheese wrote:Only USA shipping?
I take care of the gear, I won't short on packing when I ship.
Outside the US gets pricey on insurance, possibly no tracking. Those Grey areas are when I start taking a little less liability on shipping. I haven't had any gear returned ever.
I had a guy ship a TI2 Polar with two thin sheets of bubble with enough space to fit a 2nd Polar and was shocked how careless they were. I will put $100 £€$of packing around it if need be.
Some pics of the CS6X.Theo.M wrote:are the yamaha an1x and cs6x fully operation and how would you describe their condition?
I did notice on rear upper right corner a scratch that's slightly cut the surface.
Another small above the filters (barely noticeable
- Attachments
-
- 20150208_083415.jpg (2.12 MiB) Viewed 1719 times
120V 16W 60hz in the USA
WYOURE in Australia, what is most your equipment?
WYOURE in Australia, what is most your equipment?
ok i'd have to see if i can source a power supply here. I have wanted a new master keyboard, used to own a cs1x and an1x and i miss them, plus want to take some load off reason RE instruments cause my puter can't take it.freeQlow wrote:120V 16W 60hz in the USA WYOURE in Australia, what is most your equipment?
How much? Don't worry about shipping, whatever it costs it costs.. just wondering how much for the cs6x itself. Also can you check the amps/dc specs on the supply?
No problem PM sent.
This is a Beast and a midi master for sure. I'm sure you know as you've owned the blue guys and gals before.
I would hate to part ways with the DX and honestly you're getting the whole package and the DX7 plg for an extra $100.
Check your inbox for price and let me know theo.
I can power it up and put a video on my YouTube if you'd like....
This is a Beast and a midi master for sure. I'm sure you know as you've owned the blue guys and gals before.
I would hate to part ways with the DX and honestly you're getting the whole package and the DX7 plg for an extra $100.
Check your inbox for price and let me know theo.
I can power it up and put a video on my YouTube if you'd like....
Mate i am thinking about it but the aussie dollar has fallen and it's a little more than i thought. We don't pay customs duties for anything 1 thousand AUD (750 USD) and under here, no tax at all under that mark for imports, and i was hoping it would fall under that. Maybe we can work out a deal and you can mark the value as 990 AUD or something )maybe 950 in case 990 is too obvious) and just insure it for 950. I mean it's not far off anyway, and not like it's not believable for a second hand product.
I need to do some checking around to see what they go for and see if your offer is fair. You can keep the DX card if you like, i only need the AN one.
I need to do some checking around to see what they go for and see if your offer is fair. You can keep the DX card if you like, i only need the AN one.
Cheers.
I would say we are very close to a deal. Let's talk later after you look around. No rush.
I'm hoping that I get some funds before litigation over here. Selling my gear is worst case but it is for sale at the moment.
I would say we are very close to a deal. Let's talk later after you look around. No rush.
I'm hoping that I get some funds before litigation over here. Selling my gear is worst case but it is for sale at the moment.
Everything is still for sale:
If you're serious and interested, please PM an offer.
CS6x
https://reverb.com/item/538806-yamaha-c ... -plg150-dx
Prophet '08 (Not PE Edition)
https://reverb.com/item/538851-dave-smi ... prophet-08
Juno 106
TR-808
R8 drum machine with SN-04 (808 Card) Samples
JX-305
Nektar S1
Korg Electribe (New Generation)
Volca Beats
Akai MPX 16 Sampler
Acidlab Miami
Circuit Bent Speak and Read
Korg 8 bit Super Section
Jamhub GreenRoom with SoleMix remote
Yamaha RX11 w/ DX Ram Card
Presonus Studio Live 16.0.2 with producer upgrade Studio One two.
Presonus Monitor Station V.2
2 x JBL LSR4328P monitors with mic and software
1, 2 and 3 tier keyboard stands.
Pro Line Monitor Stands
If you're serious and interested, please PM an offer.
CS6x
https://reverb.com/item/538806-yamaha-c ... -plg150-dx
Prophet '08 (Not PE Edition)
https://reverb.com/item/538851-dave-smi ... prophet-08
Juno 106
TR-808
R8 drum machine with SN-04 (808 Card) Samples
JX-305
Nektar S1
Korg Electribe (New Generation)
Volca Beats
Akai MPX 16 Sampler
Acidlab Miami
Circuit Bent Speak and Read
Korg 8 bit Super Section
Jamhub GreenRoom with SoleMix remote
Yamaha RX11 w/ DX Ram Card
Presonus Studio Live 16.0.2 with producer upgrade Studio One two.
Presonus Monitor Station V.2
2 x JBL LSR4328P monitors with mic and software
1, 2 and 3 tier keyboard stands.
Pro Line Monitor Stands
- EnochLight
- Moderator
- Posts: 8405
- Joined: 17 Jan 2015
- Location: Imladris
Is the Juno 106 still for sale? If so, how much and please post pics of its physical condition. Does work OK? No stuck keys or bad contacts?freeQlow wrote:Everything is still for sale: If you're serious and interested, please PM an offer. CS6x https://reverb.com/item/538806-yamaha-c ... -plg150-dx Prophet '08 (Not PE Edition) https://reverb.com/item/538851-dave-smi ... prophet-08 Juno 106 TR-808 R8 drum machine with SN-04 (808 Card) Samples JX-305 Nektar S1 Korg Electribe (New Generation) Volca Beats Akai MPX 16 Sampler Acidlab Miami Circuit Bent Speak and Read Korg 8 bit Super Section Jamhub GreenRoom with SoleMix remote Yamaha RX11 w/ DX Ram Card Presonus Studio Live 16.0.2 with producer upgrade Studio One two. Presonus Monitor Station V.2 2 x JBL LSR4328P monitors with mic and software 1, 2 and 3 tier keyboard stands. Pro Line Monitor Stands
Win 10 | Ableton Live 11 Suite | Reason 12 | i7 3770k @ 3.5 Ghz | 16 GB RAM | RME Babyface Pro | Akai MPC Live 2 & Akai Force | Roland System 8, MX1, TB3 | Dreadbox Typhon | Korg Minilogue XD
Few Pics Coming through
- Attachments
-
- Few Pics, Great Condition
- 20150502_155708.jpg (1.44 MiB) Viewed 1712 times
-
- Everything Works
- 20150502_155759.jpg (1.95 MiB) Viewed 1712 times
-
- Original Voice Chips
- 20150502_155753.jpg (2.16 MiB) Viewed 1712 times
If you look passed the two faders missing (Both work with/out) this 106 is Cosmetically/Functionally perfect.
I doubt you will find a nicer 32 year old Synthesizer with Midi.
Hope you can Solder. Other than that small project, it's super Minty!
I doubt you will find a nicer 32 year old Synthesizer with Midi.
Hope you can Solder. Other than that small project, it's super Minty!
- Attachments
-
- Freq/LFO work, just no Fader for the pot. Hope you can Solder.
- 20150502_155554.jpg (1.78 MiB) Viewed 1712 times
-
- Parts were Ordered from Italy where they were made.
- 20150502_155602.jpg (1.84 MiB) Viewed 1712 times
-
- I don't solder, this is not a good 1st time solder job for me.
- 20150502_155608.jpg (2.04 MiB) Viewed 1712 times
Few more of the Inside.
- Attachments
-
- 20150502_155105.jpg (2.23 MiB) Viewed 1711 times
-
- 20150502_155110.jpg (2.71 MiB) Viewed 1711 times
-
- 20150502_155316.jpg (1.92 MiB) Viewed 1711 times
Everything works, even the LFO Delay and VCO Freq work.EnochLight wrote:Is the Juno 106 still for sale? Â If so, how much and please post pics of its physical condition. Â Does work OK? Â No stuck keys or bad contacts?freeQlow wrote:Everything is still for sale: If you're serious and interested, please PM an offer. CS6x https://reverb.com/item/538806-yamaha-c ... -plg150-dx Prophet '08 (Not PE Edition) https://reverb.com/item/538851-dave-smi ... prophet-08 Juno 106 TR-808 R8 drum machine with SN-04 (808 Card) Samples JX-305 Nektar S1 Korg Electribe (New Generation) Volca Beats Akai MPX 16 Sampler Acidlab Miami Circuit Bent Speak and Read Korg 8 bit Super Section Jamhub GreenRoom with SoleMix remote Yamaha RX11 w/ DX Ram Card Presonus Studio Live 16.0.2 with producer upgrade Studio One two. Presonus Monitor Station V.2 2 x JBL LSR4328P monitors with mic and software 1, 2 and 3 tier keyboard stands. Pro Line Monitor Stands
Being a DJ, I've seen djs murder mixers or snap a crossfader at the surface.
Not what happened here, but I can get my finger pressed onto both faders under the surface and adjust.
PM to discuss prices.
- EnochLight
- Moderator
- Posts: 8405
- Joined: 17 Jan 2015
- Location: Imladris
Done.freeQlow wrote: Everything works, even the LFO Delay and VCO Freq work.
Being a DJ, I've seen djs murder mixers or snap a crossfader at the surface.
Not what happened here, but I can get my finger pressed onto both faders under the surface and adjust.
PM to discuss prices.
Win 10 | Ableton Live 11 Suite | Reason 12 | i7 3770k @ 3.5 Ghz | 16 GB RAM | RME Babyface Pro | Akai MPC Live 2 & Akai Force | Roland System 8, MX1, TB3 | Dreadbox Typhon | Korg Minilogue XD
Every home needs a juno 106
No serious buyers, I hope not to sell it but could use some real estate
-
- Information
-
Who is online
Users browsing this forum: No registered users and 15 guests