Page 3 of 38
Re: Nektar Panorama Remote Maps Thread
Posted: 12 Oct 2015
by Lizard
polysix wrote:Hello Reason + Nektar P Series user
,
i´m in work with a template for Ochen K. Probatily CV Trigger Divice to learn how it works.
But i stand at a point that i don´t know how something works or my code is incorrect.
Is there a place that we can change tempates or is there someone who can take a look at my template and can give
me some tips?
I wont post my code that is not working correct here in this forum, i think it makes so much confsuions.
Can you help me?
Greats
polysix
You can send me a PM with a txt file of your map. I'll look at it and see if I see an issue. I'll look at it later today sometime.
Re: Nektar Panorama Remote Maps Thread
Posted: 24 Oct 2015
by auricle
Can I recommend to the mods to make this excellent thread a sticky?
Re: Nektar Panorama Remote Maps Thread
Posted: 28 Nov 2015
by arqui
Vinilyzer fixed (Lizard file fixed)
Code: Select all
Scope Sugar Bytes com.sugarbytes.Vinylizer
Define Group Mode Instrument Mixer Transport Channel
Define Group force_patch_Feedback Patch 1 Patch 2
Map Mixer Mode Mode=Mixer
Map Instrument Mode Mode=Instrument
Map Transport Mode Mode=Transport
Map Channel Mode Mode=Channel
//Device name that appears on Panorama's dispaly
Map Device Name "Vinylizer" HOME
Map Patch Name Patch Name Instrument Patch 1
Map Patch Name Patch Name Instrument Patch 2
Map Bypass Enabled Instrument
Map Page Name "" Instrument
//Display buttons
Map X1_Labeli "Bypass" Instrument
Map X1 0 BYPASS Instrument
Map Name Element 1 "Size Sync" Instrument
Map Name Element 2 "Slow Down" Instrument
Map Name Element 3 "Down Slope" Instrument
Map Name Element 4 "Up Slope" Instrument
Map Ch Knob 1 sizesynctp Name Instrument
Map Ch Knob 2 slowdown Name Instrument
Map Ch Knob 3 downslope Name Instrument
Map Ch Knob 4 upslope Name Instrument
Map Fader Name Element 9 "Dry / Wet" Instrument
Map Fader 9 drywet NAME Instrument
Now Try to work in Kuassa EVE MP5
Today
What I have almost done but it gives me an error and can not find it.
Someone who does and can help me? Lizard? Thanks
sending the file by private ....
Re: Nektar Panorama Remote Maps Thread
Posted: 01 Dec 2015
by satyr32
I would be very happy if someone could map Steerpike or at least Titus. I tried it myself but could not achieve something without error. I think I am using the wrong text editor (I am on OSX).
Re: Nektar Panorama Remote Maps Thread
Posted: 01 Dec 2015
by Lizard
I'll give Titus a shot. I don't have it so I am doing it blindly but JP has good documentation on all his RE with regards to Remote Mapping. Just confirm the following for me. The length parameter of the device are radio buttons right? That is only one can be selected at a time right? These work in conjunction with the Delay Value Display? If this is so then I can map quickly.
EDIT : OK. So I put this one together. There is no way for me to test it however. I don't have the device for one and the other is that I do not have my Nektar in front of me. That said, I feel pretty good about it. Download the map below and append it to your Nektar remote map.
https://dl.dropboxusercontent.com/u/175 ... .remotemap
Re: Nektar Panorama Remote Maps Thread
Posted: 02 Dec 2015
by satyr32
First I want to thank you Lizard and indeed all the other guys who do an amazing job.
Now Titus:
First, there is a small mistake. The button that is now labeled "BBD" on the Panorama display is attached to the Direction: either Forward or Backward. The solution here is simply name it e.g. "Direction" instead of "BBD". At the moment there is no button on the Panorama display for BBD.
Next is more difficult: On page 2, the 4 buttons labled "Time", "Stage", "Sync D" and "Sync S" all have to be knobs instead of buttons, because all 4 of them allow much more values than just 2 (On/Off). With the knob that is currently I think on the top left on page 2 you choose which one of the four delay types you want.
I give an example: With the just mentioned knob you choose which one of the four modes you want to use, e.g. Time. With the Time knob (which is a button at the moment) I choose the milliseconds. Maybe it would make more sense that the knob you choose the mode with are 4 buttons instead, but I dont know if this is even possible that only one button of 4 can only be active. But for now maybe i would leave it as knob.
I know it is maybe difficult to understand if you do not have the device, on top of that my english is grosse, but I hope you got it.
Thanks again for your work. You should get paided by Nektar and Props.
Re: Nektar Panorama Remote Maps Thread
Posted: 02 Dec 2015
by Lizard
OK. Based on the information given I have modified the Titus map. There is now a knob under the Delay Mode knob. The 4 buttons are gone and same as page 1. Knob 1 (Delay Mode) is now a modifier meaning that it will change the assignment of knob 5 (underneath it). This knob will only control the value of the mode selected in knob 1. I think this makes more sense. Give it a try and let me know if it works. Just download the original hypoerlink again for modified version.
Re: Nektar Panorama Remote Maps Thread
Posted: 03 Dec 2015
by satyr32
Good job! Everything now works fine and as it should.
One thing is now missing though. The button where you can switch delay direction (Forward or Backward). In your first version it was implemented, but labled wrong as "BBD" Button. I think there was a confusion because one element is called "Delay Time Mode" (this is the knob that you call "Delay Mode" in your above post) and there is an element that is actually called "Delay Mode", which is the direction button that is missing.
If I understand the code correctly it is missing the folowing lines:
Map X4_Labeli "Direction" Instrument Default
Map X4 Delay Mode CTRL Instrument Default
Map X4_Labeli "Direction" Instrument Page1
Map X4 Delay Mode CTRL Instrument Page1
Map X4_Labeli "Direction" Instrument Page2
Map X4 Delay Mode CTRL Instrument Page2
I dont if it is the best to call it "Direction", also possible would be "Mode" or "Forward" or "Fwd".
I would implement it myself but I get errors with my editor, but it is cool, I think I learned more or less how to "code" the remotes.
Re: Nektar Panorama Remote Maps Thread
Posted: 03 Dec 2015
by Lizard
@Satyr32 - Glad to see it working as it should. Yes! The code you display above is correct. I have implemented it to my map, uploaded and the existing link should have the updated code. For clarification and help for anyone reading along here is how that code is interpreted.
X1-X5 are the buttons in the display window. They have two controls actually. One is the button and the other is the display or label. All the nektar controls have them. So the remote script says map X4_Labeli and then calls it whatever is in the quotes. Too big will not fit. 8 Characters often is tight. Instrument defines it is visible when it is an instrument page. Default/Page1/Page2 are similar in that these commands only work on that page. With regards to the button X4 is the button. Delay Mode is the Remote Target in the Re and CTRL defines the behavior of the button. CTRL is by default but there are other options. If you wanted the button to only be active when pressed and then wanted it to not be active when released you would substitute CTRL with RETRIG.
Re: Nektar Panorama Remote Maps Thread
Posted: 03 Dec 2015
by arqui
Hi Lizard, I send a Private message with EVEMP5 remotemap. can you see it? have an error and I could not find. thanks
Re: Nektar Panorama Remote Maps Thread
Posted: 03 Dec 2015
by Lizard
@arqui - I haven't received it. Sent recently?
Re: Nektar Panorama Remote Maps Thread
Posted: 03 Dec 2015
by arqui
Hi Lizard
send here now. is a remotemap of EVEMP5. have error ( Ihave use template of UBIK -A)
Code: Select all
Scope Kuassa com.kuassa.EVEMP5
Define Group Mode Instrument Mixer Transport Channel
Define Group X_Mode Default Mod
Define Group ch_Mode ch_Default ch_Mod
Define Group force_patch_Feedback Patch 1 Patch 2
// Control Surface Item Key Remotable Item Scale Mode
Map Mixer Mode Mode=Mixer
Map Instrument Mode Mode=Instrument
Map Transport Mode Mode=Transport
Map Channel Mode Mode=Channel
Map Device Name "" HOME
Map Patch Name Patch Name Instrument Patch 1
Map Patch Name Patch Name Instrument Patch 2
Map Force_patch_change force_patch_Feedback=Patch 1 Instrument Patch 2
Map Force_patch_change force_patch_Feedback=Patch 2 Instrument Patch 1
Map Bypass Enabled Instrument
Map Display Default 0 Mixer
Map Display Default X_Mode=Default Instrument
Map Instrument Mode ch_Mode=ch_Default Instrument
Map Page Name "MP5-EQ" Instrument Default
Map X1_Labeli "MEQ" Instrument Default
Map X2_Labeli "Saturat" Instrument Default
Map X3_Labeli "Auto Lev" Instrument Default
Map X4_Labeli "EQP" Instrument Default
Map X5_Labeli ">" Instrument Default
Map X1 MEQ On/Off Instrument Default
Map X2 Saturation On/Off Instrument Default
Map X3 Saturation Auto Level On/Off Instrument Default
Map X4 EQP On/Off Instrument Default
Map X5 X_Mode=Mod Instrument Default
Map X5_ch ch_Mode=ch_Mod Instrument Default
Map Name Element 1 "Input" Instrument ch_Default
Map Name Element 2 "MEQ MF" Instrument ch_Default
Map Name Element 3 "MEQ MP" Instrument ch_Default
Map Name Element 4 "Output" Instrument ch_Default
Map Name Element 5 "MEQ L " Instrument ch_Default
Map Name Element 6 "MEQ LP" Instrument ch_Default
Map Name Element 7 "MEQ HF" Instrument ch_Default
Map Name Element 8 "MEQ HP" Instrument ch_Default
Map Ch Knob 1 Input Volume Name Instrument ch_Default
Map Ch Knob 2 MEQ Mid Freq Name Instrument ch_Default
Map Ch Knob 3 MEQ Mid dip Name Instrument ch_Default
Map Ch Knob 4 Output Volume Name Instrument ch_Default
Map Ch Knob 5 MEQ Low Freq Name Instrument ch_Default
Map Ch Knob 6 MEQ Low Peak Name Instrument ch_Default
Map Ch Knob 7 MEQ High Freq Name Instrument ch_Default
Map Ch Knob 8 MEQ High Peak Name Instrument ch_Default
Map Page Name "MP5-PROG" Instrument Mod
Map X1_Labeli "MEQ" Instrument Mod
Map X2_Labeli "Saturat" Instrument Mod
Map X3_Labeli "Auto Lev" Instrument Mod
Map X4_Labeli "EQP" Instrument Mod
Map X5_Labeli "<" Instrument Mod
Map X1 MEQ On/Off Instrument Mod
Map X2 Saturation On/Off Instrument Mod
Map X3 Saturation Auto Level On/Off Instrument Mod
Map X4 EQP On/Off Instrument Mod
Map X5 X_Mode=Default Instrument Mod
Map X5_ch ch_Mode=ch_Default Instrument Mod
Map Name Element 1 "EQP LF" Instrument ch_Mod
Map Name Element 2 "EQP LB" Instrument ch_Mod
Map Name Element 3 "EQP LA" Instrument ch_Mod
Map Name Element 4 "EQP HBF" Instrument ch_Mod
Map Name Element 5 "EQP HB" Instrument ch_Mod
Map Name Element 6 "EQP HBB" Instrument ch_Mod
Map Name Element 7 "EQP HAF" Instrument ch_Mod
Map Name Element 8 "EQP HA" Instrument ch_Mod
Map Ch Knob 1 EQP Low Freq Name Instrument ch_Mod
Map Ch Knob 2 EQP Low Boost Name Instrument ch_Mod
Map Ch Knob 3 EQP Low Atten Name Instrument ch_Mod
Map Ch Knob 4 EQP HighBoost Freq Name Instrument ch_Mod
Map Ch Knob 5 EQP HighBoost Name Instrument ch_Mod
Map Ch Knob 6 EQP HighBoost Bandwidth Name Instrument ch_Mod
Map Ch Knob 7 EQP HighAtten Freq Name Instrument ch_Mod
Map Ch Knob 8 EQP HighAtten Name Instrument ch_Mod
Other Using Nektar template.
using knobs above the fader . not work too...
Code: Select all
Scope Kuassa com.kuassa.EVEMP5
Define Group Mode Instrument Mixer Transport Channel
Define Group force_patch_Feedback Patch 1 Patch 2
Map Mixer Mode Mode=Mixer
Map Instrument Mode Mode=Instrument
Map Transport Mode Mode=Transport
Map Channel Mode Mode=Channel
//Device name that appears on Panorama's dispaly
Map Device Name "EVEMP5" HOME
Map Patch Name Patch Name Instrument Patch 1
Map Patch Name Patch Name Instrument Patch 2
Map Bypass Enabled Instrument
Map Page Name "" Instrument
//Display buttons
Map X1_Labeli "Bypass" Instrument
Map X2_Labeli "MEQ" Instrument
Map X3_Labeli "Saturat" Instrument
Map X4_Labeli "AutoLev" Instrument
Map X5_Labeli "EQP" Instrument
Map X1 BYPASS Instrument
Map X2 MEQ On/Off CTRL Instrument
Map X3 Saturation On/Off CTRL Instrument
Map X4 Saturation Auto Level On/Off CTRL Instrument
Map X5 EQP On/Off CTRL Instrument
//Display Encoders
Map Name Element 1 "Input" Instrument
Map Name Element 2 "MEQ MF" Instrument
Map Name Element 3 "MEQ MP" Instrument
Map Name Element 4 "Output" Instrument
Map Name Element 5 "MEQ L " Instrument
Map Name Element 6 "MEQ LP" Instrument
Map Name Element 7 "MEQ HF" Instrument
Map Name Element 8 "MEQ HP" Instrument
Map Ch Knob 1 Input Volume Name Instrument
Map Ch Knob 2 MEQ Mid Freq Name Instrument
Map Ch Knob 3 MEQ Mid dip Name Instrument
Map Ch Knob 4 Output Volume Name Instrument
Map Ch Knob 5 MEQ Low Freq Name Instrument
Map Ch Knob 6 MEQ Low Peak Name Instrument
Map Ch Knob 7 MEQ High Freq Name Instrument
Map Ch Knob 8 MEQ High Peak Name Instrument
//Buttons
Map Button 1 EQP On/Off NAME Instrument
Map Button 8 Phase On/Off NAME Instrument
//Encoders
Map Knob 1 EQP Low Freq NAME Instrument
Map Knob 2 EQP Low Boost NAME Instrument
Map Knob 3 EQP Low Atten NAME Instrument
Map Knob 4 EQP HighBoost Freq Name Instrument
Map Knob 5 EQP HighBoost NAME Instrument
Map Knob 6 EQP HighBoost Bandwidth NAME Instrument
Map Knob 7 EQP HighAtten Freq NAME Instrument
Map Knob 8 EQP HighAtten NAME Instrument
Re: Nektar Panorama Remote Maps Thread
Posted: 03 Dec 2015
by Lizard
If when you try to run the remotemap and it gives an error click on the red X. It will give you more detail as to where your error is. Is will say the line(s) that are not in compliance and a small description. If you do this you could probably solve the problem fairly quickly as it narrows down your issue. But if you need further help tell me the line and I'll look closer. I don't see any syntax errors in it. I do see that you have a BYPASS mapped but don't refer to one in your code. Not sure if this will throw an error or not. I am not near my Nektar to test it at the moment.
Re: Nektar Panorama Remote Maps Thread
Posted: 04 Dec 2015
by arqui
Lizard wrote:If when you try to run the remotemap and it gives an error click on the red X. It will give you more detail as to where your error is. Is will say the line(s) that are not in compliance and a small description. If you do this you could probably solve the problem fairly quickly as it narrows down your issue. But if you need further help tell me the line and I'll look closer. I don't see any syntax errors in it. I do see that you have a BYPASS mapped but don't refer to one in your code. Not sure if this will throw an error or not. I am not near my Nektar to test it at the moment.
I missed something, that red x? where is it?
I test the file in the NEKTAR, and stays frozen. I try so, is there any other way?
very thank you
Re: Nektar Panorama Remote Maps Thread
Posted: 04 Dec 2015
by Lizard
arqui wrote:I missed something, that red x? where is it?
I test the file in the NEKTAR, and stays frozen. I try so, is there any other way?
very thank you
When you make a change to your map you either have to disable then enable your controller in session or restart Reason again. Once you try to load the map if it fails it will tell you it failed to load and put a red "X" on the controller. If you click on the "X" it will give your more detail to what failed and specifically by the LINE number in the script that failed. Using a text editor that shows line numbers you can quickly see which part of your code failed. You can often come to the conclusion yourself as it ends up being wrong white spacing, typo etc. There should not be anything as far as a bad Nektar remote script that should freeze Reason. It should just fail to load.
Re: Nektar Panorama Remote Maps Thread
Posted: 04 Dec 2015
by arqui
I will Try... Thanks
Re: Nektar Panorama Remote Maps Thread
Posted: 04 Dec 2015
by arqui
here the error:
Failed to load control surface: Nektar, Panorama.
Map File Errors:
Line 33438: Scope missing Remotable Manufacturer or Model.
33438 Scope Kuassa com.kuassa.EVEMP5
but.... but this is well written
Re: Nektar Panorama Remote Maps Thread
Posted: 04 Dec 2015
by arqui
Here the file with line errors.
the firts line change (Kuassa x EVE-MP5 Program Equalizer Kuassa) and work
all very strange to me
for example
error ---- Map Ch Knob 5 EQP HighBoost Name Instrument ch_Mod --- (Map entry with unknown group value)
good ---- Map Ch Knob 6 EQP HighBoost Bandwidth Name Instrument ch_Mod
error ---- Map Ch Knob 7 EQP HighAtten Freq Name Instrument ch_Mod --- (Map entry with unknown group value)
Code: Select all
Scope EVE-MP5 Program Equalizer Kuassa com.kuassa.EVEMP5
Define Group Mode Instrument Mixer Transport Channel
Define Group X_Mode Default Mod
Define Group ch_Mode ch_Default ch_Mod
Define Group force_patch_Feedback Patch 1 Patch 2
// Control Surface Item Key Remotable Item Scale Mode
Map Mixer Mode Mode=Mixer
Map Instrument Mode Mode=Instrument
Map Transport Mode Mode=Transport
Map Channel Mode Mode=Channel
Map Device Name "EVEMP5" HOME
Map Patch Name Patch Name Instrument Patch 1
Map Patch Name Patch Name Instrument Patch 2
Map Force_patch_change force_patch_Feedback=Patch 1 Instrument Patch 2
Map Force_patch_change force_patch_Feedback=Patch 2 Instrument Patch 1
Map Bypass Enabled Instrument
Map Display Default 0 Mixer
Map Display Default X_Mode=Default Instrument
Map Instrument Mode ch_Mode=ch_Default Instrument (Map entry with unknown mode)
Map Page Name "MP5-EQ" Instrument Default
Map X1_Labeli "Bypass" Instrument Default
Map X2_Labeli "MEQ" Instrument Default
Map X3_Labeli "Saturat" Instrument Default
Map X4_Labeli "AutoLev" Instrument Default
Map X5_Labeli "EQP" nstrument Default
Map X1 0 BYPASS Instrument Default
Map X2 0 MEQ On/Off Instrument Default (Map entry with unknown mode)
Map X3 0 Saturation On/Off Instrument Default (Map entry with unknown mode)
Map X4 0 Saturation Auto Level On/Off Instrument Default (Map entry with unknown mode)
Map X5 0 EQP On/Off Instrument Default (Map entry with unknown mode)
Map Name Element 1 "Input" Instrument ch_Default
Map Name Element 2 "MEQ MF" Instrument ch_Default
Map Name Element 3 "MEQ MP" Instrumen t ch_Default
Map Name Element 4 "Output" Instrument ch_Default
Map Name Element 5 "MEQ L " Instrument ch_Default
Map Name Element 6 "MEQ LP" Instrument ch_Default
Map Name Element 7 "MEQ HF" Instrument ch_Default
Map Name Element 8 "MEQ HP" Instrument ch_Default
Map Ch Knob 1 Input Volume Name Instrument ch_Default
Map Ch Knob 2 MEQ Mid Freq Name Instrument ch_Default
Map Ch Knob 3 MEQ Mid Dip Name Instrument ch_Default (Map entry with unknown group value)
Map Ch Knob 4 Output Volume Name Instrument ch_Default
Map Ch Knob 5 MEQ Low Freq Name Instrument ch_Default
Map Ch Knob 6 MEQ Low Peak Name Instrument ch_Default
Map Ch Knob 7 MEQ High Freq Name Instrument ch_Default
Map Ch Knob 8 MEQ High Peak Name Instrument ch_Default
Map Page Name "MP5-PROG" Instrument Mod (Map entry with unknown mode)
Map X1_Labeli "Bypass" Instrument Mod
Map X2_Labeli " " Instrument Mod
Map X3_Labeli " " Instrument Mod
Map X4_Labeli " " Instrument Mod
Map X5_Labeli "<" Instrument Mod
Map X1 0 BYPASS Instrument Mod
Map X2 0 Instrument Mod
Map X3 0 Instrument Mod
Map X4 0 Instrument Mod
Map X5 X_Mode=Default Instrument Mod
Map X5_ch ch_Mode=ch_Default Instrument Mod
Map Name Element 1 "EQP LF" Instrument ch_Mod
Map Name Element 2 "EQP LB" Instrument ch_Mod
Map Name Element 3 "EQP LA" Instrument ch_Mod
Map Name Element 4 "EQP HBF" Instrument ch_Mod (Map entry with unknown mode)
Map Name Element 5 "EQP HB" Instrument ch_Mod
Map Name Element 6 "EQP HBB" Instrument ch_Mod (Map entry with bad scale value)
Map Name Element 7 "EQP HAF" Instrument ch_Mod (Map entry with unknown mode)
Map Name Element 8 "EQP HA" Instrument ch_Mod
Map Ch Knob 1 EQP Low Freq Name Instrument ch_Mod (Map entry with unknown group value)
Map Ch Knob 2 EQP Low Boost Name Instrument ch_Mod (Map entry with unknown group value)
Map Ch Knob 3 EQP Low Atten Name Instrument ch_Mod (Map entry with unknown group value)
Map Ch Knob 4 EQP HighBoost Freq Name Instrument ch_Mod (Map entry with unknown group value)
Map Ch Knob 5 EQP HighBoost Name Instrument ch_Mod (Map entry with unknown group value)
Map Ch Knob 6 EQP HighBoost Bandwidth Name Instrument ch_Mod
Map Ch Knob 7 EQP HighAtten Freq Name Instrument ch_Mod (Map entry with unknown group value)
Map Ch Knob 8 EQP HighAtten Name Instrument ch_Mod (Map entry with unknown group value)
Re: Nektar Panorama Remote Maps Thread
Posted: 04 Dec 2015
by Lizard
@arqui
I am not sure why the original scope did not work. All other Kuassa products only use Kuassa. EVEMP5 should be the same. Unfortunately I am unable to test it at the moment and won't be able to for a few days. The code section in this forum doesn't really save "white spaces" very well and often can be the reason for syntax failures. So that is always an option. But here are a couple corrections you need to make.
1. Map X2-X5 - Remote Targets go where you have "0". Where you have thre remote targets you should have most likely CTRL
2. I don't see how you would navigate to the "Mod" page. In a multi-page setup like this you would have to assign a page nave button like X5 to direct you while you are on the default page. Like this :
Map->X5->->X_Mode=Mod->->->Instrument->Default
Map ->X5_ch->->ch_Mode=ch_Mod->->->Instrument->Default
This of course has you looking for another option of mapping EQP On/Off
3, Be sure the Define Group Lines are properly white spaced. Only single tabs between them.
Define Group->X_Mode->Default->Mod
Define Group->ch_Mode->ch_Default->ch_Mod
Re: Nektar Panorama Remote Maps Thread
Posted: 04 Dec 2015
by arqui
wowww tanks, a very clear explanation....
tomorrow I will be carefully analyzed.
I commented that more up, I fix vinylizer your file.
Programming is not my specialty.
Lizard wrote:
3, Be sure the Define Group Lines are properly white spaced. Only single tabs between them.
if I saw that, and try to correct.
Re: Nektar Panorama Remote Maps Thread
Posted: 11 Dec 2015
by inthewind
Hello,
Here my contribution, thanks to Lizard for his advices:
Numerical Sound - Tone Mutation Vocals
Code: Select all
Scope Numerical Sound com.numericalSound.ToneMutationsVocals
Define Group Mode Instrument Mixer Transport Channel
Map Mixer Mode Mode=Mixer
Map Instrument Mode Mode=Instrument
Map Transport Mode Mode=Transport
Map Channel Mode Mode=Channel
Map Device Name "TM Vocals" HOME
Map Bypass Enabled Instrument
//Display buttons
Map X1_Labeli "Bypass" Instrument
Map X1 0 BYPASS Instrument
//Display Encoders
Map Name Element 1 "Width" Instrument
Map Name Element 2 "Pan" Instrument
Map Name Element 3 "Gain" Instrument
Map Name Element 4 "Dry/Wet Mix" Instrument
Map Ch Knob 1 Width Name Instrument
Map Ch Knob 2 Pan Name Instrument
Map Ch Knob 3 Gain Name Instrument
Map Ch Knob 4 Dry/Wet Mix Name Instrument
All knobs working except the selection of patches because no remote mapping possible when right clicking. Maybe someone knows how to map that ?
MgSoft Audio Software - Unifylter
Code: Select all
cope MGSoft Audio Software com.mikegazzaruso.Unifylter
Define Group Mode Instrument Mixer Transport Channel
Define Group force_patch_Feedback Patch 1 Patch 2
Map Mixer Mode Mode=Mixer
Map Instrument Mode Mode=Instrument
Map Transport Mode Mode=Transport
Map Channel Mode Mode=Channel
Map Device Name "Unifylter" HOME
Map Patch Name Patch Name Instrument Patch 1
Map Patch Name Patch Name Instrument Patch 2
Map Bypass Enabled Instrument
//Display buttons
Map X1_Labeli "Bypass" Instrument
Map X1 0 BYPASS Instrument
//Display Encoders
Map Name Element 1 "Amount" Instrument
Map Name Element 2 "Reso" Instrument
Map Name Element 3 "Filtsel" Instrument
Map Name Element 4 "DryWet" Instrument
Map Name Element 5 "Gain" Instrument
Map Name Element 6 "" Instrument
Map Name Element 7 "" Instrument
Map Name Element 8 "" Instrument
Map Ch Knob 1 Amount Name Instrument
Map Ch Knob 2 Reso Name Instrument
Map Ch Knob 3 Filtsel Name Instrument
Map Ch Knob 4 DryWet Name Instrument
Map Ch Knob 5 Gain Name Instrument
I had to put the exact same names in both lines "Map Name Elements" and "Map Ch Knob XX" in order the knob to be appearing and working in Panorama's display. For Example if i put for Unifilter "Freq" ( name of the knob on the device) in "Map Ch Knob 1", the knob do not show. If y put "Amount" in that line, it works. Any Idea how to personalize it ?
Re: Nektar Panorama Remote Maps Thread
Posted: 21 Dec 2015
by Lizard
Small update. I've added mapping for Air Raid Audio's Elements : Splitter as well as two maps made by inthewind.
@ Arqui - If you have Eve5 done let me know and I'll add to the latest map.
Re: Nektar Panorama Remote Maps Thread
Posted: 22 Dec 2015
by arqui
hi lizard,
I've tried a thousand times and I could not fix it.
this is not for me. treatment and do not understand the methodology.
sorry.
if I succeed you will be the first to know.
Cheers
Re: Nektar Panorama Remote Maps Thread
Posted: 23 Dec 2015
by arqui
finaly map for Kuassa EVEMP5
Code: Select all
Scope Kuassa com.kuassa.EVEMP5
Define Group Mode Instrument Mixer Transport Channel
Define Group force_patch_Feedback Patch 1 Patch 2
Map Mixer Mode Mode=Mixer
Map Instrument Mode Mode=Instrument
Map Transport Mode Mode=Transport
Map Channel Mode Mode=Channel
//Device name that appears on Panorama's dispaly
Map Device Name "EVEMP5" HOME
Map Patch Name Patch Name Instrument Patch 1
Map Patch Name Patch Name Instrument Patch 2
Map Bypass Enabled Instrument
//Display buttons
Map X1_Labeli "Bypass" Instrument
Map X2_Labeli "MEQ" Instrument
Map X3_Labeli "SAT" Instrument
Map X4_Labeli "SAT AL" Instrument
Map X5_Labeli "EQP" Instrument
Map X1 0 BYPASS Instrument
Map X2 MEQ On/Off CTRL Instrument
Map X3 Saturation On/Off CTRL Instrument
Map X4 Saturation Auto Level On/Off CTRL Instrument
Map X5 EQP On/Off CTRL Instrument
//Display Encoders
Map Name Element 1 "INPUT" Instrument
Map Name Element 2 "MID FREQ" Instrument
Map Name Element 3 "MID DIP" Instrument
Map Name Element 4 "OUPUT" Instrument
Map Name Element 5 "LOW FREQ" Instrument
Map Name Element 6 "LOW PEAK" Instrument
Map Name Element 7 "H FREQ" Instrument
Map Name Element 8 "H PEAK" Instrument
Map Ch Knob 1 Input Volume Name Instrument
Map Ch Knob 2 MEQ Mid Freq Name Instrument
Map Ch Knob 3 MEQ Mid Dip Name Instrument
Map Ch Knob 4 Output Volume Name Instrument
Map Ch Knob 5 MEQ Low Freq Name Instrument
Map Ch Knob 6 MEQ Low Peak Name Instrument
Map Ch Knob 7 MEQ High Freq Name Instrument
Map Ch Knob 8 MEQ High Peak Name Instrument
//Encoders
Map Knob 1 EQP Low Freq NAME Instrument
Map Knob 2 EQP Low Boost NAME Instrument
Map Knob 3 EQP Low Atten NAME Instrument
Map Knob 4 EQP HighBoost Freq NAME Instrument
Map Knob 5 EQP HighBoost NAME Instrument
Map Knob 6 EQP HighBoost Bandwidth NAME Instrument
Map Knob 7 EQP HighAtten Freq NAME Instrument
Map Knob 8 EQP HighAtten NAME Instrument
//Buttons
Map Button 1 0 NAME Instrument
Map Button 2 0 NAME Instrument
Map Button 3 0 NAME Instrument
Map Button 4 0 NAME Instrument
Map Button 5 0 NAME Instrument
Map Button 6 0 NAME Instrument
Map Button 7 0 NAME Instrument
Map Button 8 Phase On/Off NAME Instrument
now work fine...
Re: Nektar Panorama Remote Maps Thread
Posted: 15 Feb 2016
by Lizard
Map updated 15 February 2016. New Updates include support for :
JPS Harmonic Synthesizer
JP's Combo X705
JP's TM1,4&9 Commentators
Primal Audio's Acid Filter
Air Raid Esplitter
Hydronexius
Skrock Orbis