Search found 109 matches
- 07 Jan 2024
- Forum: Reason General
- Topic: Reason 12 and Windows 11
- Replies: 4
- Views: 5295
Re: Reason 12 and Windows 11
Found this Thread about W11 and Reason 12 and thought before I open a new one I will post in here. Anybody could give me a feedback on Windows 11 with Reason 12 in comparison to Windows 10? Thinking about to upgrade because I will Reinstall my hole Workstation Setup: Dual Boot with Windows & QubesOS...
- 29 Aug 2023
- Forum: Reason General
- Topic: Reason 12.6.2 Release Notes
- Replies: 15
- Views: 7741
Re: Reason 12.6.2 Release Notes
anyone worked already a few hours with the update on windows?
- 12 Apr 2022
- Forum: Patches, ReFills and Sound Packs
- Topic: Omnisphere like Refill?
- Replies: 22
- Views: 3405
Re: Omnisphere like Refill?
What do you mean with exoteric? Maybe this is what I mean with Omnisphere. I am looking for inspiration when the mood is bad or the ideas are lacking. I love to craft sounds in Reason but sometimes it is very hard for me to find the right sound... in some songs I miss a very unique instrument that ...
- 12 Apr 2022
- Forum: Patches, ReFills and Sound Packs
- Topic: Omnisphere like Refill?
- Replies: 22
- Views: 3405
Re: Omnisphere like Refill?
Bitley and Pink Noise are great mentions. Although different beasts, but yet great refills. Omnisphere is a powerful machine -- but of course one can create similar sounds with stock devices and ReFills. Just takes more time. Omnisphere is there ready to go. And on that quote: "..Eric Persing is a ...
- 06 Apr 2022
- Forum: Reason General
- Topic: Nektar P1 "did not respond properly" error after latest Update
- Replies: 19
- Views: 3035
Re: Nektar P1 "did not respond properly" error after latest Update
That's a cable with ferrite rings to suppress EMI. Looks like you have some kind of "noisy" environment there with respect to EMI. (LED) lights are quite often a possible source for interference. Awesome conclusion I habe indeed LED Lichts for my desk to brighten up the Night hours of producing :) ...
- 05 Apr 2022
- Forum: Reason General
- Topic: Nektar P1 "did not respond properly" error after latest Update
- Replies: 19
- Views: 3035
Re: Nektar P1 "did not respond properly" error after latest Update
I thought I post my solution to this problem. It was the cable and I could use it on W7 without problems. I am now on W10 but also no problems I used this USB Cable (not that on the picture but with a "dämpfer" (I dont know the word in english) https://www.thomann.de/at/udg_ultimate_usb_2.0_cable_s2...
- 05 Apr 2022
- Forum: Patches, ReFills and Sound Packs
- Topic: Omnisphere like Refill?
- Replies: 22
- Views: 3405
Re: Omnisphere like Refill?
Reason as a whole is comparable to Ominisphere. It’s just about what you’re looking for. Yep, thinking the same. With Reason one can do everything! Thanks for the shares :) both look very interesting! Did anyone work also with omnisphere? I've worked with Omnisphere before. It's got a *lot* of samp...
- 03 Apr 2022
- Forum: Patches, ReFills and Sound Packs
- Topic: Omnisphere like Refill?
- Replies: 22
- Views: 3405
Re: Omnisphere like Refill?
Thanks for the shares
both look very interesting! Did anyone work also with omnisphere?
both look very interesting! Did anyone work also with omnisphere?
- 03 Apr 2022
- Forum: Patches, ReFills and Sound Packs
- Topic: Omnisphere like Refill?
- Replies: 22
- Views: 3405
Omnisphere like Refill?
Hello guys & girls,
anyone nows a Refill Collection who is comparable of the omnisphere synth rompler?
I bother with buying omnisphere but in Reason we have so much instruments so is it really necessary?
I am searching instruments for inspiration.
Cheers
anyone nows a Refill Collection who is comparable of the omnisphere synth rompler?
I bother with buying omnisphere but in Reason we have so much instruments so is it really necessary?
I am searching instruments for inspiration.
Cheers
- 02 Sep 2021
- Forum: Reason General
- Topic: Reason 12 when idle sends my CPU and Fans into overdrive
- Replies: 6
- Views: 780
Re: Reason 12 when idle sends my CPU and Fans into overdrive
Just opening my template file in Reason 12 is making my CPU and fans go into overdrive. I can open the template file in Reason 11 Suite without any problem. Looking at Activity monitor, just opening file without playing a note, Reason 12 is using 425% the CPU usage compared to Reason 11 Suite. Same...
- 02 Sep 2021
- Forum: Reason General
- Topic: Windows 10: R12 (R+) high CPU usage at startup
- Replies: 5
- Views: 1263
Re: Windows 10: R12 (R+) high CPU usage at startup
Yep, I also realized it after I closed R12 on my Laptop. The fans are getting crazy stable for a long time so I always shut down the process in the task manager. So, I do understand that Reason is scanning my location when I am log in with the online account but I would NOT understand it, if this i...
- 02 Sep 2021
- Forum: Reason General
- Topic: Windows 10: R12 (R+) high CPU usage at startup
- Replies: 5
- Views: 1263
Re: Windows 10: R12 (R+) high CPU usage at startup
Yep, I also realized it after I closed R12 on my Laptop. The fans are getting crazy stable for a long time so I always shut down the process in the task manager. So, I do understand that Reason is scanning my location when I am log in with the online account but I would NOT understand it, if this is...
- 01 Sep 2021
- Forum: Reason General
- Topic: Reason 12 has arrived
- Replies: 654
- Views: 723747
Re: Reason 12 has arrived
Tried it out, installed R12 on my Laptop and opened a project file and had no issues. Still worried about the install on my main machine because I am ending a track soon so maybe I will wait for that till i finished him.
No install needed except the new version of R12.
No install needed except the new version of R12.
- 01 Sep 2021
- Forum: Reason General
- Topic: Reason 12 has arrived
- Replies: 654
- Views: 723747
Re: Reason 12 has arrived
Hey guys, how do you handle R12 with installing and using older projects with it. When I download R12 it is starting a new installation so, do I have to download every other product (RE, Music Instruments) again or will R12 install in the already existing installation folder and I can use all RE´s ...
- 01 Sep 2021
- Forum: Reason General
- Topic: Reason 12 has arrived
- Replies: 654
- Views: 723747
Re: Reason 12 has arrived
Hey guys, how do you handle R12 with installing and using older projects with it. When I download R12 it is starting a new installation so, do I have to download every other product (RE, Music Instruments) again or will R12 install in the already existing installation folder and I can use all RE´s a...
- 09 Dec 2020
- Forum: Reason General
- Topic: Nektar P1 "did not respond properly" error after latest Update
- Replies: 19
- Views: 3035
Re: Nektar P1 "did not respond properly" error after latest Update
I run the same Firmware and followed everything how it is described in the manuel. I did not use the P1 long and I think after an R11 Update it began. I ran R11 on a Win7 Setup and had "only" the Problem that the message appears after some time "P1 did not respond properly" but now with Win10 it wo...
- 08 Dec 2020
- Forum: Reason General
- Topic: Nektar P1 "did not respond properly" error after latest Update
- Replies: 19
- Views: 3035
Re: Nektar P1 "did not respond properly" error after latest Update
I run the same Firmware and followed everything how it is described in the manuel. I did not use the P1 long and I think after an R11 Update it began. I ran R11 on a Win7 Setup and had "only" the Problem that the message appears after some time "P1 did not respond properly" but now with Win10 it won...
- 08 Dec 2020
- Forum: Reason General
- Topic: Nektar P1 "did not respond properly" error after latest Update
- Replies: 19
- Views: 3035
Re: Nektar P1 "did not respond properly" error after latest Update
Now, I am on Win10 and Reason cannot find the P1 Controller, Uninstalled and installed a few times but no success. Reason only found the mixer mode in the Controller Preferences. I am sad, thought that the Controller will let me feel the production more because of the really cool controll mechanics ...
- 18 Sep 2020
- Forum: Reason General
- Topic: Nektar P1 "did not respond properly" error after latest Update
- Replies: 19
- Views: 3035
Re: Nektar P1 "did not respond properly" error after latest Update
Im on a mac using reason 10 and in the last 2-3 months ive ran into the issue. Right now *knocks on cyber wood* i dont have the issue but it seems like when you have the issue its unrelenting and very frustrating. The issue hasnt logically made sense to me either. What i can recommend is manually d...
- 08 Sep 2020
- Forum: Reason General
- Topic: Nektar P1 "did not respond properly" error after latest Update
- Replies: 19
- Views: 3035
Re: Nektar P1 "did not respond properly" error after latest Update
I have tried all (newly install all and set it up new for reason) but it had no effect when I use the P1 on ongoing Projects. When I start a new Project I have no problem BUT I think I have a solution for the case if you worked with the P1 on a project for a while and after a time it happens again: ...
- 05 Aug 2020
- Forum: Patches, ReFills and Sound Packs
- Topic: Introducing the ReasonTalk Supersaw Collection ReFill!
- Replies: 37
- Views: 26571
Re: Introducing the ReasonTalk Supersaw Collection ReFill!
Thanks! Will look into that thingy
- 05 Aug 2020
- Forum: Reason General
- Topic: Nektar P1 "did not respond properly" error after latest Update
- Replies: 19
- Views: 3035
Re: Nektar P1 "did not respond properly" error after latest Update
[/quote] Could it be that you saved the song without having the Nektar set as Master (using the Nektar instructions).? I had a song I’d started which I hadn’t set the mappings up for previously. I had to go in and go through the whole process again in Reason settings and then re-save the song [/quot...
- 05 Aug 2020
- Forum: Reason General
- Topic: Nektar P1 "did not respond properly" error after latest Update
- Replies: 19
- Views: 3035
Re: Nektar P1 "did not respond properly" error after latest Update
thanks for your answer! I tried that but no success. I used the controller for 5 months without a problem now I start reason and the Controller immediately is inactive. I worked weeks in the same project before with the controller without any probs... no firmware update needed. In a new project file...
- 05 Aug 2020
- Forum: Reason General
- Topic: Nektar P1 "did not respond properly" error after latest Update
- Replies: 19
- Views: 3035
Nektar P1 "did not respond properly" error after latest Update
Hello Guys & Girls, since the latest Reason Update I get a constant Message that "Control surface inactivated" when I am clicking on a Automation line or on a Mixer Channel - I cannot say if its only when I am clicking on something but the Message appears really often and my P1 Panorama cant be use ...
- 01 Nov 2019
- Forum: Reason General
- Topic: synths, sounds, etc wont stop running/playing
- Replies: 1
- Views: 574
Re: synths, sounds, etc wont stop running/playing
when i open ANY reason file and touch any key for any instrument (drums included, redrum etc) it plays the note and then doesnt stop. it just keeps repeating and i cant make it stop. any one encounter this? please help Hmmm, control your "View" settings maybe that will help. Had also issues yesterd...