Search found 11141 matches

by selig
26 Mar 2024
Forum: Reason General
Topic: Pre listening a specific channel
Replies: 4
Views: 217

Re: Pre listening a specific channel

If your interface has 4 outputs, you can do this with the Control Room Outputs patched to output 3/4 and using Send 8 as a PFL (pre fader listen) function. You will need to be able to listen to JUST these inputs with your headphones, so hopefully that is easy to setup with your specific interface. I...
by selig
26 Mar 2024
Forum: Reason General
Topic: What do you think re control room in Reason?
Replies: 10
Views: 455

Re: What do you think re control room in Reason?

It only works like a console if you have a separate pair of outputs for monitors (as the manual states), because output 1/2 is what gets bounced so it’s basically the “two track out” of the “console”, and CR is the “monitor out” (on channels 3/4). But I’ve never used the CR outputs myself, since I’v...
by selig
20 Mar 2024
Forum: Tutorials and Techniques
Topic: Using Mimic for reference tracks (for mixing)
Replies: 22
Views: 447

Re: Using Mimic for reference tracks (for mixing)

Ah, I get it. You are a very successful producer whose days are booked solid. Every minute counts in your music production facility. But seriously, how many users here on the forum are actually in the situation where they need to shave minutes off a project :lol: I was thinking about this recently,...
by selig
20 Mar 2024
Forum: The Kitchen
Topic: What are you watching at the moment? (possible spoilers)
Replies: 1280
Views: 200703

Re: What are you watching at the moment? (possible spoilers)

Watching DARK. It is so critically acclaimed and highly rated, and I am up to episode 5 now and I am still bored to tears. I can only hope things improve in Season 2 or towards the end of season 1. Dark is complex - tried to get into season 2 after a break, and have forgotten too much from season 1...
by selig
18 Mar 2024
Forum: Reason General
Topic: Reason's export max audio resolution
Replies: 8
Views: 353

Re: Reason's export max audio resolution

Sorry, I guess I'm not following today. Reason is limited to what you see when you export, which is determined by the programmers choice. The hardware is limiting what you hear on playback. That is why you can export at such extremes on some DAWs, I'm guessing, though I've had no experience with it ...
by selig
18 Mar 2024
Forum: Reason General
Topic: Reason's export max audio resolution
Replies: 8
Views: 353

Re: Reason's export max audio resolution

oy ya all! what is the max of reason daw export audio resolution? is this depending on your audio hardware or is reason daw limited to 24bit/192khz max natively? thnx. It is totally in Reason's control. Reason could export at some insanely high/low sample rate and 64 bit float (by upsampling and 'p...
by selig
18 Mar 2024
Forum: Reason General
Topic: i say goodby to you! Thank you!
Replies: 42
Views: 2485

Re: i say goodby to you! Thank you!

Bless you - I can only hope to be as graceful and positive when the day comes that I find myself in your position.
Your positive attitude has touched and inspired me greatly, and I thank you for that gift. I can only hope to repay you by passing it on when the time comes…
by selig
18 Mar 2024
Forum: Reason General
Topic: delay swing
Replies: 3
Views: 274

Re: delay swing

YES!!!
Years ago I built a swing/shuffle delay for the Factory Sound Bank, search under delay (can remember if I called it “swing” or “shuffle”, will check when I get into the studio this morning).
[it’s “Shuffle Delay”, in the FSB since 2011!]
by selig
16 Mar 2024
Forum: Rack Extensions
Topic: Anyone developing a mixer?
Replies: 236
Views: 42144

Re: Anyone developing a mixer?

I really have to make sure my Mixer isn't crossing over too much with yours Selig. If you are going to do 8 sends I might drop that idea and go back to the original 2U design with 4 sends. Murf You don’t have to change anything, I’m without a coder at present so you won’t be seeing this from me unl...
by selig
16 Mar 2024
Forum: Rack Extensions
Topic: Anyone developing a mixer?
Replies: 236
Views: 42144

Re: Anyone developing a mixer?

cool thread. im just now getting caught up on it. here's my 2 cents. for sound design, I always combinator my instruments and use a mixer 14:2 in said combi. this might just be me, but i never even use the send returns and instead just wire them back to a channel in the mixer. that way i can make s...
by selig
15 Mar 2024
Forum: Rack Extensions
Topic: Anyone developing a mixer?
Replies: 236
Views: 42144

Re: Anyone developing a mixer?

I am sure Selig would agree, but connecting multiple devices introduces one cycle of buffer latency between every stage, whereas in one RE that is avoided. That was always my assumption, but it doesn't appear to be consistent. I can run four Line mixers serially, followed by four Selig Gains (8 dev...
by selig
15 Mar 2024
Forum: Rack Extensions
Topic: Anyone developing a mixer?
Replies: 236
Views: 42144

Re: Anyone developing a mixer?

…Not even sure what the actual use is beyond the currently available mixers... :D https://i.imgur.com/crAqedx.png I really like the idea of large vertical faders/meters. All I’m thinking now is physical position and features, and a way to differentiate from what is already available. And also what ...
by selig
14 Mar 2024
Forum: The Kitchen
Topic: Sincere apology to all
Replies: 13
Views: 593

Re: Sincere apology to all

Dude, glad you made it back from whatever trip you were on, seems like you’ve made lots of major changes recently. I sincerely hope folks here will give you the benefit of the doubt. I always felt you had decent intentions and were easy to talk to, so I welcome you back with open arms. :)
by selig
14 Mar 2024
Forum: Rack Extensions
Topic: Selig De-Esser
Replies: 15
Views: 5118

Re: Selig De-Esser

I like this RE very much! but I have a question. lets say we have a background vocals bus, a collection of channels that are panned some left and some right. But then if I use the de-esser in the bus insert-fx, the stereo information is gone :( is there some alternative routing possible to keep it ...
by selig
11 Mar 2024
Forum: RE Development and SDK Discussion
Topic: Editable Labels
Replies: 2
Views: 130

Re: Editable Labels

Yes, that’s it!
Still drinking my morning coffee and misread this thread title as “Edible Labels”, which as far as I am aware is NOT possible - good morning indeed!
by selig
10 Mar 2024
Forum: VST Plugins
Topic: Adding full ADSR envelope to Serato Sample slices
Replies: 11
Views: 348

Re: Adding full ADSR envelope to Serato Sample slices

You're on the right track with Modrack ADSR. But you have to trigger Modrack's ADSR. You can do this with a handy utility called One-Note Stand. Then patch the ADSR CV out into Serato and route it to the volume control of the desired sample. That, I can't help you with, as I don't have Serato. In t...
by selig
10 Mar 2024
Forum: Reason General
Topic: Looks like Reason Studios have redesigned their site...
Replies: 113
Views: 6162

Re: The New Website

I actually love the new website. I'm a web designer for what its worth but this site is much quicker, laid out nicer, and looks much more responsive than the previous version. I just went to the new site, was there looking to see read about had changed with the newest update. Couldn’t find it with ...
by selig
07 Mar 2024
Forum: Reason Feature Requests
Topic: Focus mode & drop-down
Replies: 5
Views: 232

Re: Focus mode & drop-down

Yea, things can get pretty gnarly with a ReDrum connected to 10 mix channels w/ some FX patched between ReDrum outs and Mix Channel inputs with other FX patched in the Mix Channel insert, all channels feeding a drum bus, plus a parallel drum bus, plus a parallel connection from the kick to side chai...
by selig
07 Mar 2024
Forum: Reason Music
Topic: Tera Kiss - Don't give up : advices needed about our song.
Replies: 3
Views: 1630

Re: Tera Kiss - Don't give up : advices needed about our song.

Great idea, only comment I would have is the rhythmic pad/vocal part going all the way through is way louder than anything else to my ears, like to the point it’s distracting from the lead. It’s like a dish with too much seasoning distracting you from the main ingredient (the vocal). Plus it is (int...
by selig
07 Mar 2024
Forum: Reason General
Topic: Looks like Reason Studios have redesigned their site...
Replies: 113
Views: 6162

Re: Looks like Reason Studios have redesigned their site...

I'm not so sure - this is the age that allows expensive hobbies and many folks in the age range are spending WAY more than the 20-somethings could ever afford to spend on audio gear. But wait, is the reason they don't chime in because of our collective age or our whine-fest? Or are they the on-in-t...
by selig
07 Mar 2024
Forum: Reason Feature Requests
Topic: Focus mode & drop-down
Replies: 5
Views: 232

Re: Focus mode & drop-down

I love the concept, like Spill mode for the rack (spill will hide all mixer channels not feeding the track you click on, so you “spill” the drum bus and only the drum channels are shown on screen - don’t remember why it’s called spill, comes from live mixers IIRC). Basically a way to visually “solo”...
by selig
07 Mar 2024
Forum: Reason General
Topic: Looks like Reason Studios have redesigned their site...
Replies: 113
Views: 6162

Re: Looks like Reason Studios have redesigned their site...

Site looks great on mobile. Don't know why there's 4 pages of (i presume) complaints about it. Because apparently the last thing any of us really want to talk about here is making music with Reason. Sure, we may eventually do it. But only after making multiple posts in the latest complaint thread f...
by selig
06 Mar 2024
Forum: Reason General
Topic: Looks like Reason Studios have redesigned their site...
Replies: 113
Views: 6162

Re: Looks like Reason Studios have redesigned their site...

Lol the average age of this forum's users must be like 50. I'm 46 so I can poke fun. We are not the demographic *any* company is targeting. It's no wonder RS barely chimes in on this forum anymore. Everything is a whine-fest I'm not so sure - this is the age that allows expensive hobbies and many f...
by selig
05 Mar 2024
Forum: Reason General
Topic: Notes in sequencer clip, sizes...
Replies: 3
Views: 313

Re: Notes in sequencer clip, sizes...

I think the single note size is the default, and as you add more notes it just shrinks to fit so that no notes are excluded. As to why, I guess it would possibly be that the alternative was somehow worse. That makes sense to me, that you'd want to prioritize seeing all recorded note data when viewin...
by selig
05 Mar 2024
Forum: Reason General
Topic: Looks like Reason Studios have redesigned their site...
Replies: 113
Views: 6162

Re: Looks like Reason Studios have redesigned their site...

dusan.cani wrote:
05 Mar 2024
Who is deleting posts with opinions that criticize the new website ? Two of my posts were censored / deleted in this thread.
I see one other post by you but no deleted posts - are you sure it was in this thread?